914M Compact Wheel Loader

Overview
Maximum Gross Power: Maximum Engine Speed
2,350 RPM
Operating Weight
19,315 lb
Rated Bucket Capacity
3 yd3
  • Exterior View
  • Interior View

Engine

Maximum Gross Power: Maximum Engine Speed
2,350 RPM
Net Power
97 hp
Engine Model
Cat C4.4 ACERT™
Maximum Gross Power: ISO 14396 (DIN)
101 hp
Rated Net Power: Rated Engine Speed
2,200 RPM
Maximum Gross Power - ISO 14396
100 HP
Maximum Gross Power - SAE J1995
102 HP
Rated Net Power - SAE J1349
96 HP
Rated Net Power - ISO 9249
97 HP
Rated Net Power - ISO 9249 (DIN)
98 HP
Maximum Gross Torque - SAE J1995
336 ft·lbf
Maximum Gross Torque: ISO 14396
332 lbf-ft
Maximum Net Torque: SAE J1349
325 lbf-ft
Maximum Net Torque - ISO 9249
329 ft·lbf
Displacement
268 in3
Bore
4 in
Stroke
5 in
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Maximum Gross Power
100 hp
Net Power
97 HP
Engine Model
Cat C4.4 ACERT�
Maximum Gross Power - ISO 14396 (DIN)
101 HP
Maximum Gross Power - Maximum Engine Speed
2,350 r/min
Rated Net Power - Rated Engine Speed
2,200 r/min
Maximum Gross Power
100 HP
Bore
4 in
Displacement
268 in³
Emissions
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396
332 ft·lbf
Maximum Net Torque - SAE J1349
325 ft·lbf
Note
Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Stroke
5 in

Weights

Operating Weight
19,315 lb
Operating Weight
19,315 lb

Operating Specifications

Rated Bucket Capacity
3 yd3
Rated Bucket Capacity
3 yd³

Service Refill Capacities

Cooling System
6 gal
Fuel Tank
41 gal
Hydraulic System (including tank)
26 gal
Engine Crankcase
2 gal
Axles - Front Center Differential
2 gal (US)
Axles - Rear Center Differential
2 gal (US)
Hydraulic Tank
15 gal
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission
1 gal
Cooling System
6 gal (US)
Fuel Tank
41 gal (US)
Engine Crankcase
2 gal (US)
Hydraulic System - Including Tank
26 gal (US)
Hydraulic Tank
15 gal (US)
Transmission
1 gal (US)

Buckets

Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)
Bucket Capacities
1.3-1.9 m3 (1.7-2.5 yd3)

Steering

Steering Articulation Angle - Each Direction
40 °
Maximum Flow - Steering Pump
22 gal/min
Maximum Working Pressure – Steering Pump
3,263 psi
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed
3 s
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
4 turns
Maximum Working Pressure - Steering Pump
3,263 psi

Loader Hydraulic System

Maximum Flow – Implement Pump
39 gal/min
Maximum Flow – Implement Pump: 3rd Function, Maximum Flow, Standard
24 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High
32 gal/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow
24 gal/min
Maximum Working Pressure – Implement Pump
4,061 psi
Relief Pressure - Tilt Cylinder
4,931 psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
3,046 psi
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
3,046 psi
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift
5 s
Hydraulic Cycle Time - Dump, at Maximum Reach
1 s
Hydraulic Cycle Time - Rackback
2 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level
4 s
Hydraulic Cycle Time - Total Cycle Time
13 s
Maximum Flow - Implement Pump
39 gal/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard
24 gal/min
Maximum Working Pressure - Implement Pump
4,061 psi

Transmission

Forward and Reverse - Low Range, Speed Range 1*
6 mile/h
Forward and Reverse - Low Range, Speed Range 2*
13 mile/h
Forward and Reverse - High Range
25 mile/h
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Note
*Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.

Tires

Standard Size
17.5-25 12PR
Other Choices Include
17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Note
Other tire choices are available. Contact your Cat dealer for details.
Note
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3)
The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4)
*The measurements were conducted with the cab doors and windows closed.
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (1)
Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2)
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating �11 degrees; Locking differential (Standard)

Optimized Z-bar Loader Linkage

The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

The Cat Optimized Z-bar Loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Work Tools

The 914M features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT) or ISO (wide) coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.

The 914M features the Cat exclusive, Performance Series Buckets, as well as high visibility pallet forks. These tools enhance productivity and are available with either an Integrated Toolcarrier (IT) or ISO (wide) coupler style. Legacy coupler tools such as brooms, grapple buckets, multi-purpose buckets and other work tools remain compatible.

Hydraulic and Controls

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. All-in-one joystick helps keep eyes on the work. Operator can adjust machine responsiveness with the push of a button, which allows the operator to set up the machine exactly the way they want it based on the application.

Tuned Drivetrain

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.

Smooth shifting and powerful acceleration is matched with modulated hydrostatic braking in the inching/braking pedal, creating a rhythm for material moving. Creeper and electronic engine speed control makes broom and snow blower work easy. Operator tunes between smooth or aggressive shifting with the push of a button.

Cab

All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Engine Speed Control and Rimpull Control allow the operator to customize the machine via a soft touch keypad.

All around visibility is further enhanced with the availability of a rearview camera. The deluxe cab ensures operator comfort with a heated, air suspension seat and easy to use controls. Available features such as Implement and Hystat Aggressiveness, Ride Control, Lift and Tilt Kickouts, Engine Speed Control and Rimpull Control allow the operator to customize the machine via a soft touch keypad.

Serviceability

Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.

Extended service intervals and excellent service access make daily checks quick and easy allowing you to get to work sooner.

Efficiently Powerful

High full turn tipping loads, powerful breakout forces and increased engine power the M Series delivers a balanced solution for all customer applications.

High full turn tipping loads, powerful breakout forces and increased engine power the M Series delivers a balanced solution for all customer applications.

Standard Fuel Savings

Features such as Eco Mode, On Demand Cooling Fan and Auto Engine Idle Shutdown make the 914M both powerful and fuel efficient.

Features such as Eco Mode, On Demand Cooling Fan and Auto Engine Idle Shutdown make the 914M both powerful and fuel efficient.

×