Cat® D8T WH Waste Handler

Overview
Engine Model
Cat C15 ACERT™
Flywheel Power
335 hp
Operating Weight
86,710 lb

From pushing trash to spreading cover, and cell construction to closing, Cat® Waste Handlers are designed and manufactured from the frame up to take on the demands of landfill work.

Engine

Engine Model
Cat C15 ACERT™
Flywheel Power
335 hp
Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349 (DIN)
317 hp
Net Power (Maximum) – 1,700 rpm: ISO 9249/SAE J1349
335 hp
Net Power (Maximum) – 1,700 rpm: ISO 9249/SAE J1349 DIN
343 hp
Net Power (Rated) – 1,900 rpm: ISO 9249/SAE J1349
312 hp
Bore
5 in
Stroke
7 in
Displacement
928 in3
Emissions
Tier 4 Final/Stage IV/Korea Tier 4
Note
All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.
Engine Model
Cat C15 ACERT™
Flywheel Power
335 HP
Bore
5 in
Stroke
7 in
Displacement
928 in³
Net Power - 1,900 rpm - ISO 9249/SAE J1349
312 HP
Net Power - 1,900 rpm - ISO 9249/SAE J1349 (DIN)
317 HP
Net Power - Maximum - ISO 9249/SAE J1349 DIN at 1,700 rpm
343 HP
Net Power - Maximum - ISO 9249/SAE J1349 at 1,700 rpm
335 HP
Emissions
Tier 4 Final/Stage IV/Korea Tier 4
Note (1)
All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Note (3)
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 2.5 kg of refrigerant which has a CO2 equivalent of 3.575 metric tonnes.

Weights

Operating Weight
86,710 lb
Operating Weight
86,710 lb

Blades – Capacity (SAE J1265)

8 SU Landfill
26 yd3
8 SU LGP Landfill
29 yd3

Blades – Width (over end bits)

8 SU Landfill
13 ft
8 U Landfill
14 ft
8 SU LGP Landfill
15 ft

Dimensions – Standard

Height (to top of roof-mounted precleaner)
145 in
Length Basic Tractor (with striker bars with two counterweights)*
206 in
Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
183 in
Height of Grouser
3 in
Track Gauge
82 in
Width of Tractor (over trunnions)
120 in
Without Trunnions (standard shoe width)
106 in
Machine Height (from grouser tip) – Exhaust Stack
137 in
Machine Height (from grouser tip) – EROPS (to top of railing)
140 in
Machine Height (from grouser tip) – Length of Track on Ground
126 in
Machine Height (from grouser tip) – Ground Clearance
24 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Dimensions – Non-Suspended

Height (to top of roof-mounted precleaner)
145 in
Length Basic Tractor (with striker bars with two counterweights)*
206 in
Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
183 in
Height of Grouser
3 in
Track Gauge
82 in
Width of Tractor (over trunnions)
120 in
Without Trunnions (standard shoe width)
106 in
Machine Height (from grouser tip) – Exhaust Stack
136 in
Machine Height (from grouser tip) – EROPS (to top of railing)
141 in
Machine Height (from grouser tip) – Length of Track on Ground
128 in
Machine Height (from grouser tip) – Ground Clearance
24 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Dimensions – LGP

Height (to top of roof-mounted precleaner)
145 in
Length Basic Tractor (with striker bars with two counterweights)*
206 in
Length of Basic Tractor (tag link trunnion to tip of rear grouser)*
183 in
Height of Grouser
3 in
Track Gauge
92 in
Width of Tractor (over trunnions)
130 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Operating Weights

Standard Waste Handler
86,710 lb
LGP Waste Handler
91,600 lb

Shipping Weight

Standard Waste Handler
73,400 lb
LGP Waste Handler
77,900 lb

Blades - Capacity (SAE J1265)

8 U Landfill
28 yd³
8 SU LGP Landfill
29 yd³
8 SU Landfill
26 yd³

Dimensions - LGP

Without Trunnions - Standard Shoe Width
130 in
Machine Height - Grouser Tip - Exhaust Stack
130 in
Machine Height - Grouser Tip - EROPS (Top of Railing)
140 in
Machine Height - Grouser Tip - Length of Track on Ground
126 in
Machine Height - Grouser Tip - Ground Clearance
24 in
Height - Grouser
3 in
Height - Top of Roof-Mounted Precleaner
145 in
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*
183 in
Length - Basic Tractor - With Striker Bars with Two Counterweights*
206 in
Track Gauge
92 in
Width - Tractor - Over Trunnions
130 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.

Transmission

1 Forward
2 mph
2 Forward
4 mph
3 Forward
7 mph
1 Reverse
3 mph
2 Reverse
5 mph
3 Reverse
9 mph
1 Forward
2 mile/h
1 Reverse
3 mile/h
2 Forward
4 mile/h
2 Reverse
5 mile/h
3 Forward
7 mile/h
3 Reverse
9 mile/h

Dimensions - Non-Suspended

Height - Grouser
3 in
Height - Top of Roof-Mounted Precleaner
145 in
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*
183 in
Length - Basic Tractor - With Striker Bars with Two Counterweights*
206 in
Machine Height - Grouser Tip - EROPS (Top of Railing)
141 in
Machine Height - Grouser Tip - Exhaust Stack
136 in
Machine Height - Grouser Tip - Ground Clearance
24 in
Machine Height - Grouser Tip - Length of Track on Ground
128 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Track Gauge
82 in
Width - Tractor - Over Trunnions
120 in
Without Trunnions - Standard Shoe Width
106 in

Dimensions - Standard

Height - Grouser
3 in
Height - Top of Roof-Mounted Precleaner
145 in
Length - Basic Tractor - Tag Link Trunnion to Tip - Rear Grouser*
183 in
Length - Basic Tractor - With Striker Bars with Two Counterweights*
206 in
Machine Height - Grouser Tip - EROPS (Top of Railing)
140 in
Machine Height - Grouser Tip - Exhaust Stack
137 in
Machine Height - Grouser Tip - Ground Clearance
24 in
Machine Height - Grouser Tip - Length of Track on Ground
126 in
Note
*With the following attachments add: SU Blade 1844 mm/72.6 in; U Blade 2241 mm/88.2 in; Drawbar 406 mm/16.0 in.
Track Gauge
82 in
Width - Tractor - Over Trunnions
120 in
Without Trunnions - Standard Shoe Width
106 in

Blades - Width - Over End Bits

8 SU LGP Landfill
15 ft
8 SU Landfill
13 ft
8 U Landfill
14 ft

Durability

  • Specialized guarding throughout the machine helps protect major components like the chassis, fuel tank and hydraulic tank from impact and airborne debris.
  • Final drive guarding helps prevent wire wrap and helps keep dirt and debris away from the Duo-Cone™ seals.
  • Pivot shaft seal guards help prevent debris from entering and damaging seals.
  • Striker bars help prevent debris from damaging the machine, and added seals help reduce the amount of material entering engine and transmission compartments.
  • Rotating bushings on tilt cylinders helps wrapping material to roll off hoses.
  • Heavy duty hinged radiator guard protects radiator and fan from penetration by material coming straight in or from under the blade.
  • Cooling system designed for high debris environments, with automatic reversing fan and swing-out access for cleanout with an air wand.
  • Laminated thermal shields and insulated Clean Emissions Module.
  • Hinged belly guard for easy cleaning.
  • Landfill blades and center-hole track shoes help you optimize your waste handler for the job.
  • Lights mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.
  • Specialized guarding throughout the machine helps protect major components like the chassis, fuel tank and hydraulic tank from impact and airborne debris.
  • Final drive guarding helps prevent wire wrap and helps keep dirt and debris away from the Duo-Cone™ seals.
  • Pivot shaft seal guards help prevent debris from entering and damaging seals.
  • Striker bars help prevent debris from damaging the machine, and added seals help reduce the amount of material entering engine and transmission compartments.
  • Rotating bushings on tilt cylinders helps wrapping material to roll off hoses.
  • Heavy duty hinged radiator guard protects radiator and fan from penetration by material coming straight in or from under the blade.
  • Cooling system designed for high debris environments, with automatic reversing fan and swing-out access for cleanout with an air wand.
  • Laminated thermal shields and insulated Clean Emissions Module.
  • Hinged belly guard for easy cleaning.
  • Landfill blades and center-hole track shoes help you optimize your waste handler for the job.
  • Lights mounted up and away from main debris area for protection, while still giving you plenty of light on the work area.

Ease of Operation

  • Comfortable, quiet operator station with excellent visibility and air handling features to help keep dust out/provide air filtration.
  • Enhanced AutoShift allows your operator to select optimum ground speed for the job and helps save fuel by automatically choosing the more efficient gear based on load.
  • Low effort, responsive controls for precision and ease of operation.
  • Selectable electro-hydraulic maps let you set implement response to match operator preferences and application.
  • Rear vision camera available to enhance visibility behind the machine.
  • Meets U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 emission standards with emissions technology that is transparent – no action required from the operator, no stopping for regeneration.
  • Comfortable, quiet operator station with excellent visibility and air handling features to help keep dust out/provide air filtration.
  • Enhanced AutoShift allows your operator to select optimum ground speed for the job and helps save fuel by automatically choosing the more efficient gear based on load.
  • Low effort, responsive controls for precision and ease of operation.
  • Selectable electro-hydraulic maps let you set implement response to match operator preferences and application.
  • Rear vision camera available to enhance visibility behind the machine.
  • Meets U.S. EPA Tier 4 Final/EU Stage IV/Korea Tier 4 emission standards with emissions technology that is transparent – no action required from the operator, no stopping for regeneration.

Technology

  • Cat Slope Indicate (Standard) shows cross slope and mainfall on the primary machine display to help operators work more confidently.
  • Cat GRADE with 3D (Optional) is an integrated grade control system that helps operators grade with more accuracy and efficiency. Antennas mount on top of the cab – not on the blade – so they are safely out of the way of landfill debris.
  • Cat AccuGrade™ (Optional) is a dealer-installed aftermarket grade-control system that provides increased grading versatility and the ability to scale capacity to changing needs, providing a choice of lasers for 2D flat-plane and slope work, Global Navigation Satellite System (GNSS) control for complex 3D cuts and contours, and/or systems using a Universal Total Station (UTS) for fine and finish grading.
  • Cat AccuGrade Ready Option (ARO) (Optional) allows you to easily install or upgrade to Cat AccuGrade 2D and 3D grade-control systems to add versatility and resale value to your machine.
  • Remote monitoring with Product Link™*/VisionLink® helps you manage your fleet more effectively and profitably.

*Product Link not available in all areas. Please consult your Cat dealer for details.

  • Cat Slope Indicate (Standard) shows cross slope and mainfall on the primary machine display to help operators work more confidently.
  • Cat GRADE with 3D (Optional) is an integrated grade control system that helps operators grade with more accuracy and efficiency. Antennas mount on top of the cab – not on the blade – so they are safely out of the way of landfill debris.
  • Cat AccuGrade™ (Optional) is a dealer-installed aftermarket grade-control system that provides increased grading versatility and the ability to scale capacity to changing needs, providing a choice of lasers for 2D flat-plane and slope work, Global Navigation Satellite System (GNSS) control for complex 3D cuts and contours, and/or systems using a Universal Total Station (UTS) for fine and finish grading.
  • Cat AccuGrade Ready Option (ARO) (Optional) allows you to easily install or upgrade to Cat AccuGrade 2D and 3D grade-control systems to add versatility and resale value to your machine.
  • Remote monitoring with Product Link™*/VisionLink® helps you manage your fleet more effectively and profitably.

*Product Link not available in all areas. Please consult your Cat dealer for details.

×