D5K2 Track-Type Tractor

Overview
Engine Model
Cat C4.4 ACERT
Displacement
269 in3
Rated Net Power @ 2,200 rpm – ISO 9249/EEC 80/1269
104 hp

Engine

Engine Model
Cat C4.4 ACERT
Displacement
269 in3
Rated Net Power @ 2,200 rpm – ISO 9249/EEC 80/1269
104 hp
Note
Engine meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.
Bore
4 in
Stroke
5 in
Power - Net
104 mm H2O
Rated Net Power - 2,200 rpm - SAE J1349
104 mm H2O
Engine Model
Cat C4.4 ACERT
Displacement
269 in³
Bore
4 in
Stroke
5 in
Note
Engine meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards.
Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
104 mm H2O

Service Refill Capacities

Fuel Tank
52 gal
Cooling System
6 gal
Crankcase - With Filter
3 gal (US)
Final Drive - Each - XL
3 gal (US)
Final Drive - Each - LGP
3 gal (US)
Transmission - Hydraulic Tank
16 gal (US)
Diesel Exhaust Fluid (DEF) Tank
5 gal
Cooling System
6 gal (US)
Fuel Tank
52 gal (US)
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)

Weights

Operating Weight - XL
20,313 lb
Operating Weight - LGP
20,992 lb
Operating Weight - LGP, 762 mm/30 in
21,442 lb
Note
Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
Note
Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.

Transmission

Drive Pumps
1
Track Motors
2
Relief Valve Settings
7,033 psi
Maximum Travel Speed - Forward
6 mile/h
Maximum Travel Speed - Reverse
6 mile/h

Hydraulic Controls

Pump Output
18 gal/min
Relief Valve Settings
2,988 psi

Winch

Weight
1,345 lb
Winch Drive
Hydrostatic
Control
Hydraulic
Speed
Variable
Winch Length
28 in
Overall Width
29 in
Drum Diameter
10 in
Drum Width
11 in
Throat Clearance
7 in
Rope Diameter - Recommended
1 in
Rope Diameter - Optional
1 in
Drum Capacity - Recommended Cable
371 ft
Drum Capacity - Optional Cable
256 ft
Maximum Line Pull - Bare Drum
40,000 lb
Maximum Line Pull - Full Drum
25,000 lb
Maximum Line Speed - Bare Drum
131 ft/min
Maximum Line Speed - Full Drum
207 ft/min

Ripper

Type
Parallelogram
Number of Shanks
3
Maximum Digging Depth
13 in
Maximum Reach - Ground Line
22 in
Maximum Ground Clearance Under Tip
18 in
Overall Width
67 in
Height
7 in
Weight
1,222 lb

Undercarriage

Shoe Width - XL
20 in
Shoe Width - LGP
26 in
Length - Track on Ground - XL
91 in
Length - Track on Ground - LGP
91 in
Track Gauge - XL
63 in
Track Gauge - LGP
69 in
Ground Contact Area - XL
3,652 in²
Ground Contact Area - LGP
4,726 in²
Ground Pressure - XL
6 psi
Ground Pressure - LGP
5 psi
Ground Contact Area - LGP, 762 mm (30 in)
5,514 in²
Ground Pressure - LGP, 762 mm (30 in)
4 psi
Shoe Width - LGP, 762 mm (30 in)
30 in
Track Gauge - LGP, 762 mm (30 in)
73 in
Number of Rollers (each side)
7
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
40
Number of Shoes - Each Side - SystemOne Undercarriage
36
Length - Track on Ground - LGP, 762 mm (30 in)
91 in
Number of Rollers - Each Side
7

Cab

Sound Levels - ISO 6396:2008
79 dB(A)
Sound Levels - SAE J1166 FEB2008
79 dB(A)
ROPS
ISO 6396:2008
FOPS
ISO 3449:2005 Level II
FOPS
ISO 3449:2005 Level II
ROPS
ISO 6396:2008

Dimensions

Track Gauge - XL
63 in
Track Gauge - LGP
69 in
Track Gauge - LGP, 770 mm (30 in)
73 in
Width - Tractor - Standard Shoes - No Blade - XL
83 in
Width - Tractor - Standard Shoes - No Blade - LGP
95 in
Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in)
104 in
Overall Length - With Blade - XL
170 in
Overall Length - With Blade - LGP
169 in
Overall Length - With Blade - LGP, 770 mm (30 in) Shoes
169 in
Length - Basic Tractor - Without Blade - XL
129 in
Length - Basic Tractor - Without Blade - LGP
129 in
Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes
129 in
Tractor Height - XL
109 in
Tractor Height - LGP
109 in
Tractor Height - LGP, 770 mm (30 in)
109 in
Ground Clearance - XL
13 in
Ground Clearance - LGP
13 in
Ground Clearance - LGP, 770 mm (30 in) Shoes
13 in
BLADE: Blade Width - XL
110 in
BLADE: Blade Width - Intermediate
115 in
BLADE: Blade Width - LGP
127 in
BLADE: Blade Height - XL
42 in
BLADE: Blade Height - Intermediate
40 in
BLADE: Blade Height - LGP
40 in
BLADE: Blade Lift Height - XL
30 in
BLADE: Blade Lift Height - Intermediate
30 in
BLADE: Blade Lift Height - LGP
30 in
BLADE: Digging Depth - XL
23 in
BLADE: Digging Depth - Intermediate
23 in
BLADE: Digging Depth - LGP
23 in
BLADE: Blade Cutting Edge Angle, Adjustable - XL
52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate
52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
BLADE: Maximum Tilt - XL
16 in
BLADE: Maximum Tilt - Intermediate
18 in
BLADE: Maximum Tilt - LGP
18 in
BLADE: Maximum Angle (either side) - XL
25°
BLADE: Maximum Angle (either side) - Intermediate
25°
BLADE: Maximum Angle (either side) - LGP
25°
BLADE: Blade Width at Maximum Angle - XL
104 in
BLADE: Blade Width at Maximum Angle - Intermediate
105 in
BLADE: Blade Width at Maximum Angle - LGP
116 in
BLADE: Blade Capacity (SAE) - XL
3 yd³
BLADE: Blade Capacity (SAE) - Intermediate
3 yd³
BLADE: Blade Capacity (SAE) - LGP
3 yd³

Slope Indicate

New grade control feature provides you slope of blade in cross slope direction and mainfall (fore/aft) direction without having to estimate.

New grade control feature provides you slope of blade in cross slope direction and mainfall (fore/aft) direction without having to estimate.

Slope Assist

New optional grade control feature which helps you more easily achieve the desired blade mainfall and cross slope automatically.

New optional grade control feature which helps you more easily achieve the desired blade mainfall and cross slope automatically.

Stable Blade

New blade control feature helps you obtain a finish grade with less operator effort.

Automatic Traction Control

New traction control feature automatically reduces track slip without having to lift blade providing improved productivity and reduced undercarriage wear for lower operating costs.

New traction control feature automatically reduces track slip without having to lift blade providing improved productivity and reduced undercarriage wear for lower operating costs.

Eco Mode

New engine throttle settings reduce fuel consumption up to 20% to save you more money.

Heated and Ventilated Seat

Experience a new level of comfort in all climates with the new optional heated and ventilated air suspension seat.

Experience a new level of comfort in all climates with the new optional heated and ventilated air suspension seat.

Power Pitch Blade

This option lets the operator easily adjust the blade pitch to optimize productivity.

Engine

Cat® C4.4 ACERT™ diesel engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards.

Cat® C4.4 ACERT™ diesel engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards.

Heated, Seat-Mounted Controls

Heated joysticks (optional) offer even greater comfort in cold climates.

AccuGrade™

Optional grade control system enables operators to cut and fill to grade with increased accuracy, minimizing the need for traditional stakes and grade checkers. Large, 177 mm (7"), AccuGrade monitor is built into the machine's dash for easy viewing during operation.

Optional grade control system enables operators to cut and fill to grade with increased accuracy, minimizing the need for traditional stakes and grade checkers. Large, 177 mm (7"), AccuGrade monitor is built into the machine's dash for easy viewing during operation.

Undercarriage

Choice of undercarriage to give you the lowest costs per hour. Select either the standard sealed and lubricated track (SALT) undercarriage or the innovative SystemOne™ undercarriage.

Choice of undercarriage to give you the lowest costs per hour. Select either the standard sealed and lubricated track (SALT) undercarriage or the innovative SystemOne™ undercarriage.

  • Electrical
    • Alternator, 12 volt, 120 Amp, heavy duty brushless
    • Alarm, backup
    • Batteries (2), heavy duty, maintenance free, 2,000 CCA
    • Diagnostic connector
    • Horn, electric
    • Lights, halogen, 2 front and 2 rear
    • Starter, electric, 12 volt
  • Operator Station
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, retractable 76 mm (3 in)
    • Foot pads, dash
    • Electronic Monitoring System with: – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level – Travel speed limiter, electronic – Engine RPM and gear display – Hour meter, electric – Engine air cleaner service indicator, electronic
    • Slope Indicate
    • Throttle switch, rotary
    • Eco mode
    • Controls, seat mounted, fore/aft adjustment
    • Armrests, adjustable
    • Mirror, rearview, inside
    • Single pedal combining deceleration and braking functions
    • Independent forward/reverse speed settings
    • Power port, 12 volt
    • Coat hook
    • Storage compartment
    • Cup holder
    • Floor mat, rubber, heavy duty
  • Hydraulics
    • Hydraulics, 3 valve
    • Load sensing hydraulics
    • Single lever, three function control
    • Hydraulic pump and oil
    • Stable blade control
  • Power Train
    • Cat C4.4 ACERT diesel engine, turbocharged, Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) certified with aftertreatment
    • Aftercooler, Air-to-Air (ATAAC)
    • Aluminum bar plate cooling system (radiator, power train)
    • Air cleaner with precleaner, automatic dust ejection and under-hood intake
    • Dual path, closed-loop hydrostatic transmission
    • Electric fuel priming pump
    • Fuel/water separator
    • Automatic Traction Control
  • Undercarriage
    • SALT Undercarriage
    • 7 roller track frame
    • Track rollers, lifetime lubricated
    • Carrier rollers
    • Track adjusters, hydraulic
    • Guards, front/rear guiding
    • Master link
  • Other Standard Equipment
    • Cat Product Link PL631 Satellite/PL641 Cellular
    • C-Frame, VPAT, hydraulic cylinders and lines
    • Lockable engine enclosures
    • Front pull device
    • Rigid drawbar
    • Ecology drains (engine, power train and implement oil and engine coolant)
    • Scheduled oil sampling ports (engine, power train implement oil)
    • Vandalism protection
    • Heavy duty crankcase guard
  • Antifreeze
    • Extended life coolant, –37° C (–35° F)
  • Electrical
    • Integrated four front halogen lights, two rear halogen lights
  • Power Train
    • Drive, auxiliary
    • Installation, winch
  • Undercarriage
    • Track Pairs, XL: – Track, 510 mm (20 in) MS SystemOne
    • Track Pairs, LGP: – Track, 660 mm (26 in) MS SystemOne – Track, 762 mm (30 in) MS SystemOne
  • Operator Station
    • Cab with air conditioning*
    • Cab, polycarbonate windows and air conditioning*
    • Seat, air suspension, choice of: – Vinyl, heated seat with heated controls – Cloth, heated seat with heated controls – Cloth, heated and ventilated seat with heated controls
    • Radio, AM/FM, Bluetooth
    • Sound suppression
    • *Air Conditioning System: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg) of refrigerant which has a CO2 equivalent of 2.288 metric tonnes
  • Hydraulics
    • Hydraulics, 4 valve for use with ripper
    • Hydraulics, 4 valve for use with winch
  • Guards
    • Guard, rear, heavy duty
    • Grill, radiator, heavy duty
    • Guard, track guiding, center
    • Guard, track roller, full length
    • Screen, rear, cab
    • Screen, side, cab
    • Screen, rear, canopy
    • Screen, front and doors, canopy
    • Sweeps, front
    • Sweeps, rear
  • Blades
    • VPAT XL blade
    • VPAT LGP blade
    • VPAT Intermediate blade
  • Rear Attachments
    • Drawbar, towing
    • Mounting, winch
    • Ripper, parallelogram, includes three shanks and teeth
  • Rear Attachment Control
    • Control, ripper
    • Control, winch
    • Control, ripper and winch
  • Machine Control And Guidance
    • Installation, AccuGrade ready, includes Cat Grade Control Slope Assist
    • Power Pitch blade control
  • Starting Aids
    • Heater, engine, coolant, 120 volt
    • Starting aid, ether
  • Other Attachments
    • Machine Security System
  • Antifreeze
    • Extended life coolant, –50° C (–58° F)
  • Field Installed Attachment
    • Winch, hydrostatic
×