D6T Track-Type Tractor

Overview
Engine Model
Cat C9.3 ACERT™
Flywheel Power
215 hp
Operating Weight
47,138 lb
  • Exterior View
  • Interior View

The new D6T dozer makes high efficiency dozing as easy as driving your pickup truck. A smooth-shifting, fully automatic four-speed Cat® transmission continuously optimizes the power train for the application. You save fuel and operator effort, without sacrificing durability, power or productivity. Work smarter too, with a full range of Cat Connect GRADE technology features to fit your job site needs.

Engine

Engine Model
Cat C9.3 ACERT™
Flywheel Power
215 hp
Displacement
567 in3
Emissions
U.S. EPA Tier 4 Final
Note
All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
Note
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.
Net Power - Maximum - ISO 9249/SAE J1349 at 1,200 rpm
245 mm H2O
Net Power - 2,200 rpm - ISO 9249/SAE J1349
215 mm H2O
Build Number
19
Engine Model
Cat C9.3 ACERT™
Flywheel Power
215 mm H2O
Displacement
567 in³
Emissions
U.S. EPA Tier 4 Final
Note (1)
All non road Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm (mg/kg) sulfur or less. Biodiesel blends up to B20 (20% blend by volume) are acceptable when blended with 15 ppm (mg/kg) sulfur or less ULSD
Note (2)
Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241.

Weights

Operating Weight
47,138 lb
Operating Weight
47,138 lb

Service Refill Capacities

Fuel Tank
97 gal
Cooling System
12 gal
Engine Crankcase
7 gal
Power Train
39 gal
Final Drives (each)
4 gal
Hydraulic Tank
17 gal
DEF Tank
5 gal
Roller Frames (each)
7 gal
Pivot Shaft Compartment
1 gal
Fuel Tank
97 gal (US)
Cooling System
12 gal (US)
Engine Crankcase
7 gal (US)
Power Train
39 gal (US)
Final Drive - Each
4 gal (US)
Hydraulic Tank
17 gal (US)
Roller Frames - Each
7 gal (US)
Pivot Shaft Compartment
1 gal (US)
DEF Tank
5 gal (US)

Operating Weight

XL A
47,846 lb
XL SU
47,138 lb
XL VPAT
53,042 lb
XW A
49,797 lb
XW SU
48,909 lb
XW VPAT
54,045 lb
LGP S
51,385 lb
LGP A
53,829 lb
Note
Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Blades – Capacity

XL SU-Blade
7 yd3
XL A-Blade
5 yd3
XL VPAT-Blade
6 yd3
XW SU-Blade
7 yd3
XW A-Blade
6 yd3
XW VPAT-Blade
7 yd3
LGP S-Blade
5 yd3
LGP A-Blade
6 yd3

Dimensions – XL

Width of Tractor Without Trunnions (standard track)
8 ft
Machine Height to Product Link Antenna(1)
11 ft
Length of Track on Ground
9 ft
Length of Basic Tractor(2)
14 ft
Ground Clearance
15 in
Ground Pressure (ISO 16754)(3)
9 psi
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions – XW

Width of Tractor Without Trunnions (standard track)
9 ft
Machine Height to Product Link Antenna(1)
11 ft
Length of Track on Ground
9 ft
Length of Basic Tractor(2)
14 ft
Ground Clearance
15 in
Ground Pressure (ISO 16754)(3)
7 psi
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions – LGP

Width of Tractor Without Trunnions (standard track)
11 ft
Machine Height to Product Link Antenna(1)
11 ft
Length of Track on Ground
11 ft
Length of Basic Tractor(2)
15 ft
Ground Clearance
16 in
Ground Pressure (ISO 16754)(3)
5 psi
Note
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions – XL VPAT

Width of Tractor Without Trunnions (standard track)
9 ft
Machine Height to Product Link Antenna(1)
11 ft
Length of Track on Ground
9 ft

Operating Weights

LGP VPAT
54,526 lb
LGP A
53,829 lb
LGP S
51,385 lb
XL A
47,846 lb
XL SU
47,138 lb
XL VPAT
53,042 lb
XW A
49,797 lb
XW SU
48,909 lb
XW VPAT
54,045 lb
Note
Operating weight includes blade, lubricants, coolant, full fuel tank, standard track, ROPS/FOPS cab, drawbar and operator.

Blades - Capacity

LGP VPAT - Blade
7 yd³
LGP A-Blade
6 yd³
LGP S-Blade
5 yd³
XL A - Blade
5 yd³
XL SU - Blade
7 yd³
XL VPAT - Blade
6 yd³
XW A - Blade
6 yd³
XW SU - Blade
7 yd³
XW VPAT - Blade
7 yd³

Blades - Width

XL SU - Blade
11 ft
XL A - Blade
14 ft
XL VPAT - Blade
13 ft
XW SU - Blade
12 ft
XW A - Blade
15 ft
XW VPAT - Blade
14 ft
LGP S-Blade
13 ft
LGP A-Blade
17 ft
LGP VPAT - Blade
14 ft

Dimensions - XL VPAT

Length - Basic Tractor(2)
16 ft
Ground Clearance
15 in
Ground Pressure (ISO 16754)(3)
10 psi
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Length - Track on Ground
9 ft
Machine Height - To Product Link Antenna(1)
11 ft
Width - Tractor - Without Trunnions - Standard Track
9 ft

Dimensions - XW VPAT

Width - Tractor - Without Trunnions - Standard Track
10 ft
Machine Height - To Product Link Antenna(1)
11 ft
Length - Track on Ground
11 ft
Length - Basic Tractor(2)
16 ft
Ground Clearance
16 in
Ground Pressure (ISO 16754)(3)
7 psi
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions - LGP VPAT

Width - Tractor - Without Trunnions - Standard Track
10 ft
Machine Height - To Product Link Antenna(1)
11 ft
Length - Track on Ground
11 ft
Length - Basic Tractor(2)
16 ft
Ground Clearance
16 in
Ground Pressure (ISO 16754)(3)
6 psi
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.

Dimensions - LGP

Ground Clearance
16 in
Ground Pressure (ISO 16754)(3)
5 psi
Length - Basic Tractor(2)
15 ft
Length - Track on Ground
11 ft
Machine Height - To Product Link Antenna(1)
11 ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
11 ft

Dimensions - XL

Ground Clearance
15 in
Ground Pressure (ISO 16754)(3)
9 psi
Length - Basic Tractor(2)
14 ft
Length - Track on Ground
9 ft
Machine Height - To Product Link Antenna(1)
11 ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
8 ft

Dimensions - XW

Ground Clearance
15 in
Ground Pressure (ISO 16754)(3)
7 psi
Length - Basic Tractor(2)
14 ft
Length - Track on Ground
9 ft
Machine Height - To Product Link Antenna(1)
11 ft
Note (1)
(1) Height measured from ground line. Add grouser height for total dimension on hard surfaces. When Cat GRADE with 3D antennas are installed, overall machine height increases by approximately 82 mm (3.2 in).
Note (2)
(2) Add 218 mm (9 in) for drawbar. Add 1387 mm/1291 mm (4'7"/4'3") for ripper on short track roller frame and long track roller frame machines respectively.
Note (3)
(3) All dimensions above with Heavy Duty undercarriage. XL and XW with SU blade, LGP with S blade with no rear attachments unless otherwise specified and calculated per ISO 16754.
Width - Tractor - Without Trunnions - Standard Track
9 ft

Performance

  • New, fully automatic four-speed lock-up clutch transmission continuously optimizes gear and engine speed for the application without added operator input.
  • Added gear between first and second, and seamless lock-up clutch engagement, for exceptionally smooth shifting.
  • Maintains power to the ground through load changes for an aggressive feel in the dirt.
  • Up to 2.5 percent more productive – move more material per hour.*
  • Faster implement response*, especially with GRADE technologies.
  • Versatility – pushing power you want for heavy dozing and the fine control you need for finish grading – all in one easy-to-transport machine.

*Compared to previous model.

  • New, fully automatic four-speed lock-up clutch transmission continuously optimizes gear and engine speed for the application without added operator input.
  • Added gear between first and second, and seamless lock-up clutch engagement, for exceptionally smooth shifting.
  • Maintains power to the ground through load changes for an aggressive feel in the dirt.
  • Up to 2.5 percent more productive – move more material per hour.*
  • Faster implement response*, especially with GRADE technologies.
  • Versatility – pushing power you want for heavy dozing and the fine control you need for finish grading – all in one easy-to-transport machine.

*Compared to previous model.

Efficiency

  • Full-time Auto Shift for significantly better fuel efficiency with less operator effort – without sacrificing performance.
  • Up to 20 percent more fuel efficient* – as much as 30 percent better in lighter load finish grading applications.
  • Sustainable: fuel savings reduces CO2 production by an average of approximately 16.6 metric tons (17.7 tons) per year.

*Compared to previous model.

  • Full-time Auto Shift for significantly better fuel efficiency with less operator effort – without sacrificing performance.
  • Up to 20 percent more fuel efficient* – as much as 30 percent better in lighter load finish grading applications.
  • Sustainable: fuel savings reduces CO2 production by an average of approximately 16.6 metric tons (17.7 tons) per year.

*Compared to previous model.

Cat Connect Technology

  • Automatically maintain established blade mainfall/cross slope with Cat GRADE with Slope Assist (Standard). Finish jobs faster, with better surface quality and significantly less operator effort. No additional hardware required.
  • Whether production dozing or finish grading, take on 3D design plans more efficiently with Cat GRADE with 3D (Optional). Factory integrated grade control system features cab roof-mounted GNSS antennas to eliminate blade masts and cables. Includes AutoCarry™ to further boost productivity.
  • Versatile, scalable Cat AccuGrade™ (Optional) is a dealer-installed grade control system. Choice of Laser, Global Navigation Satellite System (GNSS) or Universal Total Station (UTS) so you get the right level of accuracy to match your job requirements.
  • Factory equip your dozer for easy installation of an AccuGrade system with the AccuGrade Ready Option (ARO) (Optional).
  • Manage your fleet more effectively and profitably with Product Link™/VisionLink® remote monitoring.
  • Automatically maintain established blade mainfall/cross slope with Cat GRADE with Slope Assist (Standard). Finish jobs faster, with better surface quality and significantly less operator effort. No additional hardware required.
  • Whether production dozing or finish grading, take on 3D design plans more efficiently with Cat GRADE with 3D (Optional). Factory integrated grade control system features cab roof-mounted GNSS antennas to eliminate blade masts and cables. Includes AutoCarry™ to further boost productivity.
  • Versatile, scalable Cat AccuGrade™ (Optional) is a dealer-installed grade control system. Choice of Laser, Global Navigation Satellite System (GNSS) or Universal Total Station (UTS) so you get the right level of accuracy to match your job requirements.
  • Factory equip your dozer for easy installation of an AccuGrade system with the AccuGrade Ready Option (ARO) (Optional).
  • Manage your fleet more effectively and profitably with Product Link™/VisionLink® remote monitoring.

Ease of Operation

  • Change ground speeds easily – in large (half gear) or small (one-tenth gear) increments – with detented thumb roller.
  • New Liquid Crystal Display (LCD) places machine data, settings menus, grade control data and more conveniently in front of the operator.
  • Display enables coded start and operator profiles.
  • Improved blade feedback with updated implement joystick.
  • More ground clearance and better penetration with new high-lift, multi-shank ripper.
  • Change ground speeds easily – in large (half gear) or small (one-tenth gear) increments – with detented thumb roller.
  • New Liquid Crystal Display (LCD) places machine data, settings menus, grade control data and more conveniently in front of the operator.
  • Display enables coded start and operator profiles.
  • Improved blade feedback with updated implement joystick.
  • More ground clearance and better penetration with new high-lift, multi-shank ripper.
×