Dimensions
- Note
-
Dependent on application and material density.
- Length of boom
-
59 ft
- Overall length of dipper handle
-
42 ft
- Dipper Payload
-
50 t
- Dipper Capacity
-
19.1-38.2 m3 (25-50 yd3)
- Note
-
Dependent on application and material density.
Weights
- General purpose dipper - 25.2 m3 (33 yd3)
-
110,000 lb
- Note
-
These weights will vary slightly depending upon dipper and optional equipment selection.
- Note
-
All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
- Working Weight - With Dipper and Standard Links
-
1,748,837 lb
- Ballast - Furnished By Customer
-
352,000 lb
- Note (1)
-
These weights will vary slightly depending upon dipper and optional equipment selection.
- Note (2)
-
All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Front End
- Rope Data - Dipper trip - Construction
-
7 x 25
- Rope Data - Dipper trip - Diameter
-
1 in
- Rope Data - Dipper trip - No.
-
1
- Rope Data - Dipper trip - Type
-
single
- Rope Data - Hoist - Construction
-
6 x 41
- Rope Data - Hoist - Diameter
-
2 in
- Rope Data - Hoist - No.
-
2
- Rope Data - Hoist - Type
-
twin dual
- Rope Data - Retract - Construction
-
8 x 37
- Rope Data - Retract - Diameter
-
2 in
- Rope Data - Retract - No.
-
1
- Rope Data - Retract - Type
-
single dual
- Components
-
One piece, forged, seamless tubular dipper handle and wide-spread boom point sheaves equipped with hoist ropes and dipper padlocks to stabilize dipper handle.
- Standard Rope Data - Hoist - No.
-
2
- Standard Rope Data - Hoist - Diameter
-
2 in
- Standard Rope Data - Crowd - No.
-
1
- Standard Rope Data - Crowd - Diameter
-
2 in
- Standard Rope Data - Retract - No.
-
1
- Standard Rope Data - Retract - Diameter
-
2 in
- Standard Rope Data - Boom Suspension - No.
-
4
- Standard Rope Data - Boom Suspension - Diameter
-
3 in
- Standard Rope Data - Dipper Trip - No.
-
1
- Standard Rope Data - Dipper Trip - Diameter
-
1 in
- Note
-
High impact ropes available as an option
- Crowd
-
Rope Crowd: the crowd machinery is located at the front center of the revolving frame; consisting of a motor, brake, drum and gearing. Plastic-impregnated crowd and retract ropes are used to move the dipper handle fore and aft.
Electrical
- Power Requirements - Average 15-minute demand
-
538-753 kW
- Power Requirements - Peak power
-
2152 kW
- Power Requirements - Voltage
-
3 phase, 50/60 Hz, 7,200V (Other voltages available to suit customer requirements.)
- Drive
-
IGBT Acutrol drive system.
- Power Requirements - Voltage
-
3 phase, 50/60 Hz, 7,200V
- Power Requirements - 50 Hz
-
6,000V, 6,600V, 7,200V
- Power Requirements - 60 Hz
-
4,160V, 7,200V
- Power Requirements - Average Power Demand
-
538-753 kW (721-1,010 hp)
- Power Requirements - Peak power
-
2,886 HP
- Note
-
Other voltages available to suit customer requirements.
Main Structures
- Crawler Mounting - Total effective bearing area (139.7 cm/55 in treads)
-
20.81 m2 (224 ft2); 371.6 kPa (53.9 psi)
- Crawler Mounting - Total effective bearing area (182.88 cm/72 in treads)
-
27.2 m2 (293 ft2); 284.1 kPa (41.2 psi)
- Hoist
-
Hoist machinery consists of a motor coupled to two gear reductions, which drive the 137 cm (54 in) hoist drum.
- Planetary Propel
-
Dual-motor independent drive.
- Revolving Frame - Welded, impact-resistant steel: Length
-
23 ft
- Revolving Frame - Welded, impact-resistant steel: Width
-
11 ft
- Swing
-
Two parallel shaft units mounted to either side of the revolving frame. Each unit is driven by a vertically mounted motor.
- Turntable - Cast alloy steel swing rack pitch diameter
-
14 ft
- Turntable - Number of tapered rollers
-
54
- Turntable - Tapered rollers diameter
-
7 in
- Turntable - Tapered, forged alloy steel roller rails diameter
-
13 ft
- Turntable - Teeth external cut (face)
-
8 in
- Upper Works Overall Width - Including Standard Walkways
-
41 in
- Crawler Dimensions - Overall Width 182.9 cm (72 in) Treads, Standard
-
28 in
- Ground Bearing Pressure - Total Effective Bearing Area
-
316 ft²
- Ground Bearing Pressure - 182.9 cm (72 in) Treads
-
39 in
- Ground Bearing Pressure
-
Ground bearing pressure is dependent upon many factors.
- Planetary Propel
-
Dual-motor independent drive.
- Swing
-
Parallel shaft gear cases, driven by a vertically mounted motor, are located on either side of the revolving frame.
- Hoist
-
A motor coupled to two gear reductions drives a 137 cm (54 in) hoist drum.
Optimal Working Ranges
- Dumping height
-
30 ft
- Dumping height at maximum electric crowd limit
-
23 ft
- Dumping radius (maximum)
-
61 ft
- Height of A-frame
-
39 ft
- Operator’s eye level
-
27 ft
- Overall width
-
41 ft
- Radius of level floor
-
51 ft
Lights
- Types
-
Incandescent lights on ground lights, walkways and operator’s cab.
- Types
-
HPS lights on boom feet, top of A-frame, machinery house, lube room, control room, utility room and flood lights.
Crowd
- Components
-
Rope Crowd with crowd machinery located at front center of the revolving frame; consisting of a motor, brake, drum and gearing.
- Components
-
Plastic-coated crowd and retract ropes are used to move the dipper handle fore and aft.
Optimal Working Ranges*
- Dumping Height - With Clearance to Open Dipper Door
-
28 ft
- Cutting Height - Maximum
-
45 ft
- Cutting Radius - Maximum
-
68 ft
- Radius of Level Floor
-
49 ft
- Revolving Frame Tail Swing Radius
-
26 in
- Note (1)
-
Optimal working ranges based on loading a Cat® 785D truck.
- Note (2)
-
*All specifications are based on a 19 m3 (25 yd3) dipper and standard 182.9 cm (72 in) treads.
Lube System
- Components (1)
-
6 pumps (4 for open gear lubricant and 2 for grease) located in an insulated, heated, double-walled lube room.
- Type
-
Automatic, single-line system for open gear lubricant and grease.
- Components (2)
-
External fast fill from lower level.