6015B Hydraulic Shovel

Overview
Operating Weight
154 tons
Ground Pressure
24 psi
Note
700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick
  • Exterior View
  • Interior View

The new Cat 6015B Hydraulic Shovel meets your need to move more material at a lower cost, so you can achieve production targets, deliver on your commitments, meet deadlines – and maximize your profitability. Load more, make more.

Weights

Operating Weight
154 tons
Ground Pressure
24 psi
Note
700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick
Ground Pressure
24 psi
Note
700 mm (28 in) track shoes, 7.6 m (24 ft 11 in) boom, 3.4 m (11 ft 2 in) stick
Operating Weight
154 t

Centralized Service Area

Feature
Accessible from ground level
Equipped With (1)
Emergency stop
Equipped With (2)
Quick couplings for: – Diesel fuel – Grease
Feature
Accessible from ground level

Backhoe Attachment (BH) – Backhoe

Capacity 1:1
11 yd3
Total Width
9 ft
Number of Teeth
5
Weight Including Standard Wear Package
16,596 lb
Maximum Material Density (loose)
3,034 lb/yd³

Electrical System

System Voltage
24V
Alternator Rating
150A (24V)
Components
Emergency stop in cabin, engine module, pump room and on service station accessible from ground level
Components
Five (5) lights for front
Batteries
4 × 200Ah (12V each)
Components (1)
Emergency stop in cabin, engine module, pump room and on service station accessible from ground level
Components (2)
All around lighting
Components (5)
Two (2) lights for left side
Components (6)
One (1) light for right side
Components (7)
Two (2) lights for rear end
Components (8)
One (1) light for machine deck/service
Components (9)
One (1) beacon light on cabin roof
Alternator Rating
150A (24V)
Components (3)
Four (4) lights on attachment
Components (4)
Five (5) lights for front
System Voltage
24V

Undercarriage

Maximum Drawbar Pull (Forward)
192,886 lbf
Hydraulic Track Tensioning
With accumulator
Number of Shoes (each side)
46
Number of Track Rollers (per side)
9
Number of Carrier Rollers (per side)
3
Travel Speed (two stages): 1st Stage (maximum)
1 mph
Travel Speed (two stages): 2nd Stage (maximum)
2 mph
Components (1)
Forged double-grouser track pads
Components (5)
Fully hydraulic self-adjusting track tensioning system with accumulator
Components (6)
Automatic hydraulic retarder valve to prevent overspeed on downhill travel
Components (2)
Chain links connected by hardened pins and bushings
Components (3)
Cat D11 Track-Type Tractor links
Components (4)
All running surfaces of sprockets, idlers, rollers and track chain links hardened
Gradeability - Travel Drives
Approximately 42%
Maximum Drawbar Pull - Reverse
220,987 lbf
Components (7)
Audible travel alarm
Hydraulic Track Tensioning
With accumulator
Maximum Drawbar Pull - Forward
192,886 lbf
Number of Carrier Rollers - Each Side
3
Number of Shoes - Each Side
46
Number of Track Rollers - Each Side
9
Travel Speed - Two Stages - 1st Stage - Maximum
1 mile/h
Travel Speed - Two Stages - 2nd Stage - Maximum
2 mile/h

Operator’s Cab

Components
Storage shelf suitable for lunch or toolbox
Components
Color LCD display with warning, filter/fluid change, and working hour information
Components
Adjustable armrest
Components
Height-adjustable joystick consoles
Components
Neutral lever (lock out) for all controls
Components
Travel control pedals with removable hand levers
Components
Two power outlets, 10 amp (total)
Components
Laminated glass front upper window and tempered other windows
Components
AM/FM radio

Swing System

Maximum Swing Speed
5 rpm
Features (3)
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
Features (2)
Hydraulic braking of swing motion when control is returned to neutral position or by counteracting control for stronger braking
Parking Brake
Wet multiple disc brake, spring-loaded/hydraulically released
Swing Drive
Two (2) compact planetary transmissions with axial piston motors
Swing Ring
Cross roller bearing with sealed internal gearing
Features
All raceways and the internal gearing of swing ring supplied by automatic central lubrication system
Features (1)
Closed-loop swing circuit with speed control
Maximum Swing Speed
5 r/min

General

Engine Output - SAE J1995
606 kW (813 hp)
Standard Bucket Capacity
Backhoe (heaped 1:1) 8.1 m3 (10.6 yd3)
Operating Weight
140 tonnes (154 tons)

Backhoe Attachment (BH) - Backhoe

Tooth System
Cat C70 penetration tip with CapSure lock
Capacity 1:1
11 yd³
Maximum Material Density - Loose
3,034 lb/yd³
Number of Teeth
5
Total Width
9 ft
Weight - Including Standard Wear Package
16,596 lb

Attachments

Buckets Equipped With
– Special liner material covering main wear areas inside and outside – Lip shrouds – Wing shrouds – Heel shrouds
Type (1)
Boom and stick torsion-resistant with welded box design
Type (4)
Float valve for boom down function
Type
Boom and stick stress-relieved after welding
Type
Float valve for boom down function
Type (2)
High-tensile steel with solid steel castings at pivot areas
Type (3)
Boom and stick stress-relieved after welding

Automatic Lubrication System

Type (2)
Grease is automatically applied to all attachment pivot points (except bucket linkage) and slew bearing
Type (3)
Standard grease reel on machine for bucket linkage
Type (4)
Grease refill service point accessible from ground
Capacity - Grease Barrel
18 gal (US)
Type
Grease refill service point accessible from ground
Type (1)
Central bank lubrication system

Operator's Cab

Components (1)
Pressurized operator station with positive filtration
Components (10)
Radio with MP3 auxiliary audio port
Components (3)
Sliding upper door window (left-hand cab door)
Components (4)
Glass-breaking safety hammer
Components (5)
Removable lower windshield with in cab storage bracket
Components (6)
Coat hook
Components (8)
Literature holder
Components (7)
Beverage holder
Components (9)
AM/FM radio
Components (2)
Mirror package
Components (11)
Two stereo speakers
Components (12)
Storage shelf suitable for lunch or toolbox
Components (13)
Color LCD display with warning, filter/fluid change, and working hour information
Components (14)
Adjustable armrest
Components (15)
Height-adjustable joystick consoles
Components (16)
Neutral lever (lock out) for all controls
Components (17)
Travel control pedals with removable hand levers
Components (18)
Two power outlets, 10 amp (total)
Components (19)
Laminated glass front upper window and tempered other windows

Engine

Engine Model
Cat® C27 ACERT™
Gross Power – SAE J1995
813 hp
Net Power – SAE J1349
746 hp
Emissions
U.S. EPA Tier 4 Final, Tier 2 Equivalent or Tier 1 Equivalent
Engine Model
Cat® C27 ACERT™
Gross Power - SAE J1995
813 HP
Net Power - SAE J1349
746 HP

Bucket

Standard Bucket Capacity - Backhoe (Heaped 1:1)
11 yd³

Operating Specifications

Bucket Payload
16 tons
Operating Weight
154 ton (US)
Bucket Payload
16 t

Backhoe Attachment (BH) - Working Range

Maximum Digging Depth
26 ft
Maximum Digging Reach
46 ft
Maximum Digging Height
43 ft
Maximum Dump Height
29 ft

Backhoe Attachment (BH) - Digging Forces

Bucket Digging Force - SAE
112,600 lbf
Stick Digging Force - SAE
98,800 lbf
Bucket Digging Force - ISO
131,700 lbf
Stick Digging Force - ISO
103,000 lbf

Engine - Cat C27 ACERT with Tier 4 Final Emission Standards

Gross Power - SAE J1995
606 kW (813 hp 1,800 min-1)
Net Power - SAE J1349
556 kW (746 hp 1,800 min-1)
Number of Cylinders
12
Bore
5 in
Stroke
6 in
Displacement
1,648 in³
Maximum Altitude - Without Deration - Above Sea Level
10,000 ft

Engine - Cat C27 ACERT with Tier 1 or Tier 2 Equivalent Emission Standards

Gross Power - SAE J1995
606 kW (813 hp 1,800 min-1)
Net Power - SAE J1349
556 kW (746 hp 1,800 min-1)
Number of Cylinders
12
Bore
5 in
Stroke
6 in
Displacement
1,648 in³
Aspiration
Turbocharged and aftercooled
Maximum Altitude - Without Deration - Above Sea Level
14,500 ft

Track

Standard
28 in
Wide
36 in
Extra Wide
39 in
Number of Shoes (each side)
46
Number of Track Rollers (each side)
9
Number of Carrier Rollers (each side)
3
Track Pads
Double grouser
Extra Wide
39 in
Number of Carrier Rollers - Each Side
3
Number of Shoes - Each Side
46
Number of Track Rollers - Each Side
9
Standard
28 in
Wide
36 in

Drive

Travel Speed - Two Stages - 1st Stage - Maximum
1 mile/h
Travel Speed - Two Stages - 2nd Stage - Maximum
2 mile/h
Maximum Drawbar Pull - Forward
192,886 lbf
Maximum Drawbar Pull - Reverse
220,987 lbf
Gradeability - Travel Drives
Approximately 42%
Hydraulic Track Tensioning
With accumulator

Service Refill Capacities

Fuel Tank
449 gal
Cooling System
44 gal
Engine Oil
23 gal
Swing Drive
2 gal
Hydraulic System (including tank)
463 gal
Hydraulic Tank
253 gal
Grease Tank
18 gal
Cooling System
44 gal (US)
Engine Oil
23 gal (US)
Fuel Tank
449 gal (US)
Grease Tank
18 gal (US)
Hydraulic System - Including Tank
463 gal (US)
Hydraulic Tank
253 gal (US)
Swing Drive
2 gal (US)

Hydraulic System

Main Pumps
3 × variable swash plate pumps
Main Pumps - Maximum Total Oil Flow
407 gal/min
Main Pumps - Maximum Pressure - Attachment
4,641 psi
Main Pumps - Maximum Pressure - Travel
4,641 psi
Swing Pump
1 × variable swash plate pump
Swing Pump - Maximum Flow - Swing
127 gal/min
Swing Pump - Maximum Pressure - Swing
5,294 psi
Pilot Pump
1 × gear pump
Pilot Pump - Maximum Flow, Pilot
40 gal/min
Pilot Pump - Maximum Pressure, Pilot
1,378 psi
Engine Fan Pump
1 × variable swash plate pump
Engine Fan Pump - Maximum Flow, Engine Fan
53 gal/min
Engine Fan Pump - Maximum Pressure, Engine Fan
3,191 psi
Hydraulic Fan Pump
1 × variable swash plate pump
Hydraulic Fan Pump - Maximum Flow, Hydraulic Fan
23 gal/min
Hydraulic Fan Pump - Maximum Pressure, Hydraulic Fan
1,958 psi
Hydraulic Oil Cooling - Maximum Flow
284 gal/min
Hydraulic Oil Cooling - Diameter of Fan
40 in
Filters (1)
Full-flow high-pressure filters (200 μm) for main pumps
Filters (2)
Full-flow filters (20 μm) for complete return circuit
Filters (3)
Pressure filters (16 μm) for servo circuit
Filters (4)
Full-flow filters (6 μm) for engine cooling return circuit
Filters (5)
Swing charge filter (15 μm)
Filters (6)
Pump case return screens (125 μm)

Powerful Engine

Optimized Truck Match

Productivity Enhancing Cat Buckets and G.E.T.

Proven Cat Cab Design

Cat Undercarriage Design

Robust Structures

Fuel Efficiency Technologies

Closed-Loop Swing System

Efficient Hydraulic System

Safety Enhancements

Cat Technology Solutions

Emissions Technology

Sustainability

Seamless Dealer Support

Serviceability

  • Undercarriage
    • Track guards – full
    • Track guards – center
    • Track width: – Standard – 700 mm (28 in) – Wide – 900 mm (36 in) – Extra Wide – 1000 mm (39 in)
  • Cold Weather Options
    • Starting aid – cold weather
    • 120V or 240V engine heater
    • Fuel heater
    • Heated cab mirror
    • Low temperature lubricants
  • Superstructure
    • Copper Mesabi or aluminum bar plate engine cooling packages
    • LED working lights
    • Powered access stairway
    • Camera system
  • Cab
    • Windshield guard (FOGS)
    • Product Link
  • Attachment
    • 3.4 m (11 ft 2 in) or 4.1 (13 ft 5 in) stick
  • Buckets
    • Additional buckets available, based on application, through your local Cat dealer
×