930M Ag Handler Small Wheel Loader

  • Exterior View
  • Interior View

Weights

Operating Weight
31,876 lb
Operating Weight
31,382 lb

Buckets

Bucket Capacities
3.1-5.0 m3 (4.0-6.5 yd3)
Bucket Capacities – Light Material
3.1-5.0 m3 (4.0-6.5 yd3)
Bucket Capacities
2.1-5.0 m³ (2.7-6.5 yd³)
Bucket Capacities - Light Material
3.1-5.0 m³ (4.0-6.5 yd³)

Engine

Maximum Gross Power – ISO 14396 (Standard Power Mode; Speed Range 1-3*)
160 hp
Maximum Gross Power – ISO 14396 (DIN) (Standard Power Mode; Speed Range 1-3*)
162 hp
Rated Net Power at 1,600 rpm – SAE J1349 (Standard Power Mode; Speed Range 1-3*)
154 hp
Rated Net Power at 1,600 rpm – SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*)
141 hp
Engine Model
Cat C7.1 ACERT
Rated Net Power at 1,600 rpm – ISO 9249 (DIN) (Standard Power Mode; Speed Range 1-3*)
158 hp
Maximum Rated Gross Power - ISO 14396
168 HP
Maximum Rated Gross Power - ISO 14396 (metric)
170 mhp
Rated Net Power - 1,600 rpm - ISO 9249 (DIN) (Standard Power Mode: Speed Range 1-3*)
158 HP
Maximum Net Torque - SAE J1349 (Standard Power Mode; Speed Range 1-3*)
566 ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode; Speed Range 1-3*)
572 ft·lbf
Displacement (Standard Power Mode; Speed Range 1-3*)
427 in3
Maximum Gross Power - Maximum Engine Speed (Performance Power Mode: Range 1-4)
1,800 r/min
Maximum Gross Power – ISO 14396 (Performance Power Mode; Speed Range 1-4)
164 hp
Maximum Gross Power – ISO 14396 (DIN) (Performance Power Mode; Speed Range 1-4)
166 hp
Rated Net Power at 1,800 rpm – SAE J1349 (Performance Power Mode; Speed Range 1-4)
157 hp
Rated Net Power - 1,800 rpm - SAE J1349 (Performance Power Mode: Speed Range 1-4)
157 HP
Rated Net Power - 1,800 rpm - ISO 9249 (DIN) (Performance Power Mode: Speed Range 1-4)
162 HP
Maximum Gross Torque – ISO 14396 (Performance Power Mode; Speed Range 1-4)
592 lbf-ft
Maximum Net Torque - SAE J1349 (Performance Power Mode; Speed Range 1-4)
566 ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode; Speed Range 1-4)
572 ft·lbf
Displacement (Performance Power Mode; Speed Range 1-4)
427 in3
Emissions
Engine meets Tier 4 Final emission standards.
Note
Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner and diesel exhaust filter.
Maximum Gross Power
164 hp
Note
Spark arrester performance as standard – Meets the performance requirements of EN 1834-1.2000 (section 6.4.2 Visual Test) and U.S. Forestry Service SAE J350.
Note
*Range 4 power is boosted to be the same as Performance Mode.
Engine Model
Cat® C7.1
Maximum Gross Power - ISO 14396 (DIN) (Standard Power Mode: Range 1-3*)
162 HP
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3*)
160 HP
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3*)
1,600 r/min
Rated Net Power - 1,600 rpm - SAE J1349 (Standard Power Mode: Speed Range 1-3*)
154 HP
Rated Net Power - 1,600 rpm - SAE J1349 at Maximum Fan Speed (Standard Power Mode; Speed Range 1-3*)
141 HP
Maximum Gross Power
168 HP
Displacement (Performance Power Mode: Speed Range 1-4)
428 in³
Displacement (Standard Power Mode: Speed Range 1-3*)
427 in³
Emissions
Engine meets U.S. EPA Tier 4 Final emission standards.
Maximum Gross Power - ISO 14396 (DIN) (Performance Power Mode: Range 1-4)
170 HP
Maximum Gross Power - ISO 14396 (Performance Power Mode: Range 1-4)
168 HP
Maximum Gross Torque - ISO 14396 (Performance Power Mode: Range 1-4)
601 ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3*)
592 ft·lbf
Note (1)
*The Cat C7.1 engine meets U.S. EPA Tier 4 Final/EU Stage V emission standards.
Note (2)
**Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology.
Note (3)
Net power ratings are tested at the reference conditions for the specified standard and denote power available at the flywheel when the engine is equipped with alternator, air cleaner, emission components and fan at specified speed.
Rated Net Power - 1,800 rpm - SAE J1349 at Maximum Fan Speed (Performance Power Mode; Speed Range 1-4)
143 HP
Net Power - SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 HP
Maximum Gross Power - Maximum Engine Speed (Standard Power Mode: Range 1-3**)
1,600 r/min
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
158 HP
Maximum Gross Power - ISO 14396 (Standard Power Mode: Range 1-3**)
160 HP
Maximum Gross Power - ISO 14396 (metric) (Standard Power Mode: Range 1-3**)
162 HP
Stroke - Performance Power Mode: Range 1-4
5 in
Maximum Net Torque - SAE J1349 (Performance [HP+] Power Mode: Range 1-4)
797 N·m
Note (4)
No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Bore (Standard Power Mode: Range 1-4)
4 in
Net Power - ISO 9249 at Minimum Fan Speed (Standard Power Mode: Range 1-3**)
156 HP
Stroke (Standard Power Mode: Range 1-3**)
5 in
Net Power - ISO 9249 (metric) at Minimum Fan Speed (Performance Power Mode: Range 1-4)
166 HP
Net Power - ISO 9249 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
164 HP
Bore (Standard Power Mode: Range 1-3**)
4 in
Maximum Net Torque - ISO 9249 (Performance Power Mode: Range 1-4)
587 ft·lbf
Maximum Gross Torque - ISO 14396 (Standard Power Mode: Range 1-3**)
795 N·m
Maximum Net Torque - ISO 9249 (Standard Power Mode: Range 1-3**)
776 N·m
Net Power - SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4)
163 HP
Displacement (Standard Power Mode: Range 1-3**)
428 in³
Maximum Net Torque - SAE J1349 (Standard Power Mode: Range 1-3**)
573 ft·lbf

Steering

Steering Articulation Angle (each direction)
40°
Steering Cycle Times (full left to full right): At 1,800 rpm: 90 rpm steering wheel speed
2 seconds
Number of Steering Wheel Turns – full left to full right or full right to full left
4 turns
Maximum Flow – Steering Pump
34 gal/min
Maximum Working Pressure – Steering Pump
3,500 psi
Maximum Steering Torque: 0 degrees (straight machine)
37,155 lbf-ft
Maximum Steering Torque: 40 degrees (full turn)
27,747 lbf-ft
Steering Cycle Times - Full Left to Full Right - Maximum RPM: 90 rpm Steering Wheel Speed
2 s
Maximum Flow - Steering Pump
34 gal/min
Maximum Steering Torque - 0° (Straight Machine)
37,155 ft·lbf
Maximum Steering Torque - 40° (Full Turn)
27,747 ft·lbf
Maximum Working Pressure - Steering Pump
3,500 psi
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left
4 turns
Steering Articulation Angle - Each Direction
40°
Steering Cycle Times - Full Left to Full Right - At 1,800 rpm: 90 rpm Steering Wheel Speed
2 s
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Steering Cylinder, Double Acting - Bore Diameter
3 in
Steering Cylinder, Double Acting - Stroke
17 in
Note (1)
Steering system uses a dedicated load sensing variable displacement pump with dual double acting cylinders.
Steering Cycle Times - Full Left to Full Right - Minimum RPM: Pump Flow Limited
3 s
Steering Cylinder, Double Acting - Rod Diameter
2 in

Loader Hydraulic System

Maximum Flow – Implement Pump
50 gal/min
Maximum Flow – Implement Pump: 3rd Function Maximum Flow*
50 gal/min
Maximum Flow – Implement Pump: 4th Function Maximum Flow*
42 gal/min
Maximum Working Pressure – Implement Pump
4,061 psi
Relief Pressure – Tilt Cylinder
4,351 psi
Relief Pressure – Tilt Cylinder: 3rd Function Maximum Working Pressure
4,061 psi
Relief Pressure – Tilt Cylinder: 4th Function Maximum Working Pressure
4,061 psi
Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Raise (ground level to maximum lift)
5 seconds
Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Dump (at maximum lift height)
2 seconds
Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Float Down (maximum lift to ground level)
2 seconds
Hydraulic Cycle Times: Standard Mode At 1,600 rpm – Total Cycle Time
8 seconds
Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Raise (ground level to maximum lift)
4 seconds
Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Dump (at maximum lift height)
1 seconds
Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Float Down (maximum lift to ground level)
2 seconds
Hydraulic Cycle Times: Performance Mode At 1,800 rpm – Total Cycle Time
8 seconds
Note
*Adjustable from 20% to 100% of maximum flow through the secondary display, when equipped.
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Dump, at Maximum Lift Height
1 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Float Down, Maximum Lift to Ground Level
2 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Raise, Ground Level to Maximum Lift
4 s
Hydraulic Cycle Time - Performance Mode at 1,800 rpm - Total Cycle Time
8 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Dump, at Maximum Lift Height
2 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Float Down, Maximum Lift to Ground Level
2 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Raise, Ground Level to Maximum Lift
5 s
Hydraulic Cycle Time - Standard Mode at 1,600 rpm - Total Cycle Time
8 s
Maximum Flow - Implement Pump
50 gal/min
Maximum Flow - Implement Pump - 3rd Function*
50 gal/min
Maximum Flow - Implement Pump - 4th Function Maximum Flow*
42 gal/min
Maximum Working Pressure - Implement Pump
4,061 psi
Note
*3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display.
Relief Pressure - Tilt Cylinder
4,351 psi
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure
4,061 psi
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure
4,061 psi
Cycle Times - 1,600 rpm - Standard: Total Cycle Time
10 s
Note (2)
Flow values listed are for a machine running in Performance Power Mode (1,800 rpm).
Cycle Times - 1,800 rpm - Performance (HP+): Dump (at Maximum Lift Height)
2 s
Cycle Times - 1,800 rpm - Performance (HP+): Total Cycle Time
9 s
Cycle Times - 1,600 rpm - Standard: Float Down (Maximum Lift to Ground Level)
3 s
Cycle Times - 1,800 rpm - Performance (HP+): Raise (Ground Level to Maximum Lift)
5 s
Cycle Times - 1,800 rpm - Performance (HP+): Float Down (Maximum Lift to Ground Level)
3 s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Maximum Working Pressure
4,061 psi
Cycle Times - 1,600 rpm - Standard: Dump (at Maximum Lift Height)
2 s
Relief Pressure - Tilt Cylinder - 3rd and 4th Function Relief Pressure
4,351 psi
Note (1)
Implement system uses a dedicated load sensing variable displacement pump with dual double acting lift cylinders and a single double acting tilt cylinder.
Cycle Times - 1,600 rpm - Standard: Raise (Ground Level to Maximum Lift)
6 s
Maximum Flow - Implement Pump - 3rd Function Maximum Flow*
50 gal/min
Lift Cylinder: Standard Lift Linkage - Bore Diameter
4 in
Tilt Cylinder: Standard Lift Linkage - Stroke
22 in
Tilt Cylinder: Standard Lift Linkage - Rod Diameter
3 in
Lift Cylinder: Standard Lift Linkage - Rod Diameter
2 in
Tilt Cylinder: Standard Lift Linkage - Bore Diameter
5 in
Lift Cylinder: Standard Lift Linkage - Stroke
29 in

Service Refill Capacities

Fuel Tank
52 gal
Cooling System
8 gal
Engine Crankcase
5 gal
Transmission (gearbox)
2 gal
Axles: Front
7 gal
Axles: Rear
7 gal
Hydraulic System (including tank)
44 gal
Hydraulic Tank
24 gal
Diesel Exhaust Fluid (DEF) Tank
5 gal
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Axles - Front
7 gal (US)
Axles - Rear
7 gal (US)
Cooling System
8 gal (US)
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
Engine Crankcase
5 gal (US)
Fuel Tank
52 gal (US)
Hydraulic System - Including Tank
44 gal (US)
Hydraulic Tank
24 gal (US)
Note
DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission - Gear Box
2 gal (US)

Transmission

Forward and Reverse: Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse: Range 2
8 mph
Forward and Reverse: Range 3
17 mph
Forward and Reverse: Range 4
25 mph
Note
*Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display, when equipped. Factory default is 7 km/h (4.4 mph).
Reverse - Range 1*
8 mile/h
Forward and Reverse - Range 1*
1-13 km/h (0.6-8 mph)
Forward and Reverse - Range 2
8 mile/h
Forward and Reverse - Range 3
17 mile/h
Forward and Reverse - Range 4
25 mile/h
Note
Creeper control allows maximum speed range adjustability in the forward direction from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1 through the secondary display when equipped. Factory default is 7 km/h (4.4 mph). Maximum reverse speed will be maintaine
Forward - Range 2
8 mile/h
Forward - Range 1*
1-13 km/h (0.6-8 mph)
Reverse - Range 4
25 mile/h
Reverse - Range 2
8 mile/h
Forward - Range 3
17 mile/h
Forward - Range 4
25 mile/h
Reverse - Range 3
17 mile/h

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note
The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, are: – Standard cab: 68 ±3 dB(A) – Deluxe cab: 66 ±2 dB(A)
Note
*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II
Note (1)
*The measurements were conducted at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds. The cab was properly installed and maintained. The measurements were conducted with the cab doors and the cab
Note (2)
*The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The sound level may vary at different engine cooling fan speeds.
Declared Sound Levels - Exterior Sound Power Level (ISO 6395:2008)*
101 dB(A)
Declared Sound Levels - Operator Sound Pressure Level (ISO 6396:2008)*
68 dB(A)

Tires

Standard Size
20.5 R25, radial (L-3)
Other Choices Include:
20.5 R25, radial (L-2); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3)
Note
Other tire choices are available. Contact your Cat dealer for details.
Note
In certain applications, the loader’s productive capabilities may exceed the tire’s tonnes-km/h (ton-mph) capabilities.
Note
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1)
Other tire choices are available. Contact your Cat dealer for details.
Note (2)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (3)
Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include
20.5 R25, Radial (L-2); 620/75 R26 MegaX, 750/65 R26 MegaX
Standard Size
20.5 R25, radial (L-3)

Axles

Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)
Front
Fixed; Locking differential (standard)
Rear
Oscillating ±11 degrees; Open differential (standard); Limited slip differential (optional)

Dimensions and Operating Specifications (Approximate) - 3.1 m³ (4.1 yd³) Bucket

Height - Ground to Cab**
11 ft
Height - Ground to Beacon**
12 ft
Height - Ground Axle Center**
2 ft
Height - Ground Clearance**
1 ft
Length - Overall*
27 ft
Length - Rear Axle to Bumper
7 ft
Length - Hitch to Front Axle
5 ft
Length - Wheel Base
10 ft
Clearance - Bucket at 45° *
10 ft
Clearance - Loadover Height**
12 ft
Clearance - Level Bucket**
13 ft
Height - Bucket Pin**
14 ft
Height - Overall**
19 ft
Reach - Bucket at 45°*
4 ft
Carry Height - Bucket Pin
2 ft
Dig Depth**
5 in
Width - Bucket
9 ft
Width - Tread Center
6 ft
Turning Radius - Over Bucket
21 ft
Width - Over Tires
8 ft
Turning Radius - Outside of Tires
18 ft
Turning Radius - Inside of Tires
9 ft
Rack Angle at Full Lift
51 degrees
Dump Angle at Full Lift
44 degrees
Rack Angle at Carry
48 degrees
Departure Angle
33 degrees
Articulation Angle
40 degrees
Tipping Load - Straight - ISO 14397-1*
16,430 lb
Tipping Load - Full Turn - ISO 14397-1*
13,934 lb
Breakout*
18,808 lb
Operating Weight*
31,876 lb
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

Dimensions and Operating Specifications (Approximate) - 3.5 m³ (4.6 yd³) Bucket

Height - Ground to Cab**
11 ft
Height - Ground to Beacon**
12 ft
Height - Ground Axle Center**
2 ft
Height - Ground Clearance**
1 ft
Length - Overall*
28 ft
Length - Rear Axle to Bumper
7 ft
Length - Hitch to Front Axle
5 ft
Length - Wheel Base
10 ft
Clearance - Bucket at 45° *
10 ft
Clearance - Loadover Height**
12 ft
Clearance - Level Bucket**
13 ft
Height - Bucket Pin**
14 ft
Height - Overall**
19 ft
Reach - Bucket at 45°*
5 ft
Carry Height - Bucket Pin
2 ft
Dig Depth**
5 in
Width - Bucket
9 ft
Width - Tread Center
6 ft
Turning Radius - Over Bucket
22 ft
Width - Over Tires
8 ft
Turning Radius - Outside of Tires
18 ft
Turning Radius - Inside of Tires
9 ft
Rack Angle at Full Lift
51 degrees
Dump Angle at Full Lift
44 degrees
Rack Angle at Carry
48 degrees
Departure Angle
33 degrees
Articulation Angle
40 degrees
Tipping Load - Straight - ISO 14397-1*
16,070 lb
Tipping Load - Full Turn - ISO 14397-1*
13,592 lb
Breakout*
17,246 lb
Operating Weight*
32,136 lb
Note (1)
*Vary with bucket.
Note (2)
**Vary with tire.
Note (3)
Dimensions listed are for a 930M Ag Handler High Lift configured with Fusion™ light material bucket, bolt-on cutting edge, logger/aggregate counterweights, additional guarding, 80 kg (176 lb) operator and Michelin 20.5 R25 (L-3) XHA2 tires.

Power Train

Note
*Differential front locking axle can be engaged on the go at full torque to 10 km/h (6.2 mph).
Rear Axle
Oscillating
Note (2)
Power train is governed by the Caterpillar exclusive Intelligent Power Management system to deliver peak performance and efficiency.
Front Axle
Fixed
Front Axle - Traction Aid*
Locking differential standard
Rear Axle - Oscillation Angle by Tire Size - 20.5 R25
± 10.5 degrees
Brakes - Service
Inboard wet disc
Rear Axle - Traction Aid
Limited slip differential optional
Brakes - Parking
Spring applied hydraulically released
Rear Axle - Oscillation Angle by Tire Size - 750/65, 620/65
± 7 degrees

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.9 kg of refrigerant which has a CO2 equivalent of 2.717 metric tonnes.

Dimensions with Bucket - Standard Lift

Height - Ground Clearance**
1 ft
Rack Angle at Carry
43 °
Departure Angle
33 °
Length - Wheel Base
10 ft
Length - Rear Axle to Bumper
7 ft
Turning Radius - Over Bucket
20 ft
Carry Height - Bucket Pin
1 ft
Width - Over Tires
8 ft
Note (2)
**Vary with tire.
Dig Depth**
4 in
Turning Radius - Outside of Tires
18 ft
Clearance - Level Bucket**
12 ft
Clearance - Bucket at 45°*
9 ft
Rack Angle at Full Lift
54 °
Height - Overall**
17 ft
Width - Bucket
8 ft
Height - Ground to Axle Center**
2 ft
Height - Bucket Pin**
13 ft
Operating Weight
31,125 lb
Width - Tread Center
6 ft
Turning Radius - Inside of Tires
9 ft
Reach - Bucket at 45°*
4 ft
Length - Overall*
25 ft
Clearance - Load over Height**
11 ft
Length - Hitch to Front Axle
5 ft
Height - Ground to Beacon**
12 ft
Articulation Angle
40 °
Height - Ground to Cab**
11 ft
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Note (1)
*Vary with bucket.
Dump Angle at Full Lift
48 °

Dimensions with Bucket - High Lift

Length - Rear Axle to Bumper
7 ft
Departure Angle
33 °
Height - Overall**
19 ft
Reach - Bucket at 45°*
4 ft
Dump Angle at Full Lift
48 °
Width - Bucket
8 ft
Length - Wheel Base
10 ft
Width - Tread Center
6 ft
Length - Hitch to Front Axle
5 ft
Height - Ground to Axle Center**
2 ft
Note (1)
*Vary with bucket.
Clearance - Bucket at 45°*
11 ft
Height - Bucket Pin**
14 ft
Height - Ground to Beacon**
12 ft
Carry Height - Bucket Pin
2 ft
Clearance - Load over Height**
12 ft
Turning Radius - Outside of Tires
18 ft
Turning Radius - Over Bucket
21 ft
Rack Angle at Full Lift
51 °
Rack Angle at Carry
47 °
Length - Overall*
27 ft
Note (2)
**Vary with tire.
Height - Ground to Cab**
11 ft
Turning Radius - Inside of Tires
9 ft
Clearance - Level Bucket**
13 ft
Width - Over Tires
8 ft
Note (3)
Dimensions listed are for a 930M Ag Handler configured with General Purpose 2.3 m³ (3.0 yd³) Fusion bucket, bolt-on cutting edges, heavy counterweights, 80 kg (176 lb) operator, and Michelin 20.5 R25 XHA2 tires.
Dig Depth**
5 in
Articulation Angle
40 °
Operating Weight
31,441 lb
Height - Ground Clearance**
1 ft

Operating Specifications

Full Turn Tip Load
19,424 lb

Sustainability

Recyclability
94%

Efficiently Powerful

Experience hybrid-like fuel efficiency with an intelligent hydrostatic power train and industry leading fuel savings through a lower maximum engine speed of just 1,600 rpm in Standard Mode. Power when you need it with Caterpillar's exclusive Power‑by-Range technology that increases power in Range 4 for improved speed on grade. For your toughest and most demanding farm applications a new Performance Mode will allow you to boost the power and hydraulic speed in all Ranges to get the job done even quicker. Meets U.S. EPA Tier 4 Final emission standards with a Cat® C7.1 engine that is designed to manage itself so you can concentrate on your work.

Work Made Easy

Move more with Caterpillar's patented quick loading Performance Series buckets and High Lift optimized Z-bar linkage that combines the digging efficiency of a traditional Z-bar with tool carrier capabilities. The parallel lift and high tilt forces throughout the working range allow you to safely and confidently handle loads from bales to silage with precise control. Multi-function work has never been easier with dedicated pumps for each system and a flow sharing implement valve governed by an intelligent power management system. Simultaneously lift, steer and drive without compromise. A 20% boost in hydraulic speeds on the Ag Handler helps you finish the day on time.

Enjoy All Day Comfort

Have a seat in the 930M Ag Handler and enjoy automatic temperature control, class leading sound levels, excellent all around visibility and low-effort joystick controls that move with you on a fully adjustable seat suspension. A large spacious operator environment combined with Caterpillar's exclusive hydraulic cylinder damping and smooth predictable controls make this the most comfortable seat on the farm.

Customize Your Experience

Fine tune machine performance with adjustments at your fingertips through the soft touch buttons and optional secondary touch screen display. Quickly set auxiliary flow to optimize grapple or silage defacer speed, enable auto reversing fan to breathe clean in dusty environments, toggle over to fine mode for improved control when bale stacking, program linkage kick-out positions for easy feed wagon loading, adjust wheel torque to match underfoot conditions when cleaning corrals and customize ride control activation speed for a smooth loaded carry run. The 930M Ag Handler is ready for the challenge on your farm!

  • Power Train
    • Auto idle shut down feature
    • Cat C7.1 engine
      • Power modes (Standard and Performance)
      • Power by range (High Power in Range 4)
      • Turbocharged and aftercooled
      • Diesel particulate filter (Fit for Life)
    • Coded start (requires secondary display)
    • Differential lock in front axle
    • Enclosed wet disc full hydraulic brakes
    • Oil sampling ports
    • Hydraulically driven demand cooling fan
    • Hydrostatic transmission with electronic control
      • Operator modes (Default, TC, Hystat, and Ice)
      • Directional Shift Aggressiveness (fast, medium, slow)
      • Rimpull control, adjust wheel torque
      • Creeper control, adjust ground speed
    • Axle Duo-Cone seal guards
    • Parking brake, electric
    • Single plane cooling package wide six fins per inch density
    • Throttle lock and max speed limiter
  • Hydraulics
    • Automatic lift lower and tilt kickouts, adjustable in-cab
    • Bucket and fork modes, adjustable in-cab
    • Cylinder damping at kickout and mechanical end stops
    • Fine mode control (fast, medium, slow)
    • Hydraulic response setting (fast, medium, slow)
    • Load sensing hydraulics and steering
    • Load sensing hydraulics and steering
  • Electrical
    • Alternator, 115 amp, heavy duty
    • Batteries, 1,000 CCA (2) 24V system, disconnect switch
    • Back-up alarm
    • Halogen work and roading lights, LED rear tail lights
    • Product Link PRO with three year subscription
    • Remote jump start post
    • Resettable main and critical function breakers
  • Operator Environment
    • Cab, pressurized
    • 75 mm (3 in) retractable seat belt, with audible alarm and indicator
    • Automatic temperature control
    • External heated mirrors with lower parabolic
    • Hydraulic control lockout
    • Ground level cab door release
    • Suspension seat, fabric
    • Lunch box storage
    • Radio ready speakers
    • Rear window defrost, electric
    • Mirror, single
    • Column mounted multi function control – lights, wipers, turn signal
    • Tilt and telescopic steering wheel
    • Tinted front glass
    • Wet arm wiper/washer, 2-speed and intermittent, front, lights, wipers, turn signal
    • Camera, rear view
  • Other Standard Equipment
    • Cat optimized Z-bar linkage with parallel lift
    • Large-access enclosure doors with adjustable close/open force
    • Recovery hitch, with pin
    • Remote mounted lubrication points
    • Lockable compartments and enclosures
  • Optional Equipment
    • Auto lube, integrated in secondary display
    • Auxiliary flow, third and fourth function
    • Beacon light, strobe
    • Cab, deluxe (standard in Europe)
      • Camera, rear view integrated into advanced display
      • Electrically adjustable external heated mirrors (2)
      • Secondary display to enable features and adjust parameters
      • LED interior lighting
      • Sunscreen, front and rear
      • Touchscreen secondary display
      • Ride control adjustable speed activation
      • Preventative maintenance reminders
      • Integrated help function (26 languages)
    • Camera, roof mounted, front view with separate display
    • Cat Production Measurement weigh scale system integrated into secondary display
    • Cold start package
      • Ether starting aid, block heater and additional batteries, 1,000 CCA (4 total)
    • Coupler, (Fusion and ISO 23727)
    • Fenders (extended cover and full coverage)
    • Differential, limited slip, rear
    • Guarding packages
    • Lights, auxiliary, halogen or LED with engine and DEF compartment lights
    • Linkage, high lift
    • Payload Technology
      • Cat Production Measurement (CPM)
      • CPM Printer
    • Product Link ELITE with capabilities for software push, data logging, histogram and trend mapping
    • Radio packages
    • Ride Control System, adjustable through secondary display
    • Seats
      • Deluxe seat – fully adjustable fabric air suspension seat with mid seat backrest
      • Premium seat – fully adjustable leather and fabric air suspension with high backrest and air lumbar support. Seat is heated and ventilated on bottom cushion and backrest.
    • Steering
      • Dual mode and secondary
    • Tire Pressure Monitoring (TPM)
    • Counterweight, additional options
    • Debris packages (low, medium, high)
    • Rear Object Detection
×