Cat C32 Auxiliary / Diesel Electric Propulsion (US EPA Tier 3 / IMO II)

Cat C32 Auxiliary / Diesel Electric Propulsion (US EPA Tier 3 / IMO II)

Minimum Rating 314 bhp
Aspiration Turbocharged-aftercooled aspiration
Configuration Vee 12, 4-stroke-cycle diesel
Bore 6 in
Stroke 6 in
Displacement 1,959 cu in
Request a Quote
Power Rating
Minimum Rating 314 bhp
Maximum Rating 1,333 BHP
Minimum Rating 314 BHP
Engine Specifications
Aspiration Turbocharged-aftercooled aspiration
Configuration Vee 12, 4-stroke-cycle diesel
Bore 6 in
Stroke 6 in
Displacement 1,959 cu in
Rotation Counterclockwise from flywheel end
Emissions U.S. EPA Tier 3 / IMO II emissions certified
Rated Engine Speed 1800 rpm
Governor Electronic (A4 ECM)
Refill Capacity Lube Oil System w/Oil filter change: 146 L (38.5 gal)
Oil Change Interval 750 hrs
Cooling Heat exchanger or keel cooled
Flywheel Housing SAE No. 0 with SAE No. 18 flywheel (136 teeth)
Aspiration Turbocharged-aftercooled aspiration
Bore 6 in
Configuration Vee 12, 4-stroke-cycle diesel
Displacement 1,959 in³
Rotation Counterclockwise from flywheel end
Stroke 6 in
Emissions U.S. EPA Tier 3 / IMO II emissions certified
Cooling Heat exchanger or keel cooled
Flywheel Housing SAE No. 0 with SAE No. 18 flywheel (136 teeth)
Governor Electronic (A4 ECM)
Oil Change Interval 750 hrs
Rated Engine Speed 1800 rpm
Refill Capacity Lube Oil System w/Oil filter change: 146 L (38.5 gal)
Dimensions & Weights
Minimum Length 84 in
Maximum Length 90 in
Minimum Height 59 in
Maximum Height 64 in
Minimum Width 57 in
Maximum Width 57 in
Minimum Engine Dry Weight 6,950 lb
Maximum Engine Dry Weight 7,160 lb
Maximum Engine Dry Weight 7,160 lb
Maximum Height 64 in
Maximum Length 90 in
Maximum Width 57 in
Minimum Engine Dry Weight 6,950 lb
Minimum Height 59 in
Minimum Length 84 in
Minimum Width 57 in

SCAC

Separate-circuit aftercooling – no sea water in aftercooler

Fuel System

Reliable electronic controlled unit injector fuel system. Enhanced control of fuel injection optimized through crank timing and the A4 ECM technology. Advanced combustion technology to optimize fuel consumption and meet emissions without aftertreatment.

Power Reserve

Industry leading power reserve

Certifications

Wide range of available Marine Society certifications

Warranty

Industry-leading warranty coverage for factory packaged components

Service

Global dealer network for service in any location

  • Air Inlet System
    • Separate circuit aftercooled (SCAC)
  • Control System
    • 24V control system
  • Cooling System
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • Fuel System
    • Duplex fuel filters with hybrid fuel lines
    • Fuel transfer and priming pump
  • Lube System
    • Oil fill, simplex filter and dipstick
    • Deep or shallow sump oil pan
  • Mounting System
    • Adjustable front support mounting system
  • General
    • Right or left hand service sides
    • Customer wiring and service tool connector
  • Air Inlet System
    • Closed crankcase fumes disposal
  • Alarm And Protection
    • MECP I control panel
    • MGCP II or MGCP IIIB control panel with Cat® Alarm and Protection System
  • Charging System
    • Charging alternator
  • Fuel System
    • Primary fuel filter with water separator, fuel cooler
  • Lube System
    • Duplex oil filters
  • Power Take-offs
    • Front drives including stub shaft and pump drive
    • Rear SAE A or B pump drives
  • Starting System
    • Starting motors – air, electric or dual
×