C7.1 High Performance Propulsion Engine
Power Range |
298 bkW - 373 bkW (400 bhp - 500 bhp) |
Speed Range |
2900 rpm |
Emissions |
EPA Tier 3 Recreational, IMO II, RCD 2016 |
Aspiration |
Turbocharged, aftercooled |
Bore |
4 in |
Stroke |
5 in |
Ratings
Power Range |
298 bkW - 373 bkW (400 bhp - 500 bhp) |
Power Range |
400 bhp - 500 bhp (298 bkW - 373 bkW) |
Engine Specifications
Speed Range |
2900 rpm |
Emissions |
EPA Tier 3 Recreational, IMO II, RCD 2016 |
Aspiration |
Turbocharged, aftercooled |
Bore |
4 in |
Stroke |
5 in |
Displacement |
427 in3 |
Rotation (from flywheel end) |
Counterclockwise |
Configuration |
In-line 6, 4-Stroke-Cycle Diesel |
Aspiration |
Turbocharged, aftercooled |
Bore |
4 in |
Configuration |
In-line 6, 4-Stroke-Cycle Diesel |
Displacement |
428 in³ |
Emissions |
IMO II, U.S. EPA Tier 3, RCD II, China II |
Rotation from Flywheel End |
Counterclockwise |
Speed Range |
2900 rpm |
Stroke |
5 in |
Dimensions & Weights
Length of Engine |
55 in |
Height |
35 in |
Width of Engine |
31 in |
Engine Dry Weight - Approximate |
1,676 lb |
Height |
35 in |
Length - Engine |
43 in |
Width - Engine |
31 in |
Key Features & Benefits
- Common rail fuel system enables optimum combustion and low emissions
- Reduced combustion noise through advanced electronic control
- 12V or 24V electrical system
- Compatible with Cat® displays and electronics
- Closed crankcase ventilation system improves engine room cleanliness
- Gear-driven jacket water pump and sea water pump for superior reliability
- Maintenance free valve train with hydraulic valve lash adjusters
- Self-priming fuel system ensures a smooth start every time
-
Standard Equipment
- Water cooled turbocharger and exhaust manifold
- Common rail fuel system
- Corrosion resistant sea water aftercooler
- Closed crankcase ventilation system
- Starter motors - 12V or 24V
- Fuel cooler
- Integral engine oil cooler
- Vibration damper and guard
- Electric fuel priming pump
- Self-tensioning multi-vee alternator drive belt
- Gear driven sea water pump (rubber impeller)
- Fin and tube type jacket water heat exchanger
- Front and rear engine mounting brackets
-
Optional Attachements
- Alternators - 24V 140 amp - 12V 175 amp
- Transmission gear oil cooler (engine mounted)
- Instrument Panels
- Glow plugs
- Jacket water heater
- 6" water cooled exhaust elbow
- Isolation mounts
- Primary fuel filter/water separator (remote mount)
- Selection of factory-fitted marine transmissions and oil hoses
- Cabin heater (calorifier) connections
- Triple groove PTO pulley (crankshaft mounted)
- Flexible fuel hoses
- Right-hand and high level left hand oil dipsticks
×