C7.1 High Performance Propulsion Engine

C7.1 High Performance Propulsion Engine

Power Range 298 bkW - 373 bkW (400 bhp - 500 bhp)
Speed Range 2900 rpm
Emissions EPA Tier 3 Recreational, IMO II, RCD 2016
Aspiration Turbocharged, aftercooled
Bore 4 in
Stroke 5 in
Ratings
Power Range 298 bkW - 373 bkW (400 bhp - 500 bhp)
Power Range 400 bhp - 500 bhp (298 bkW - 373 bkW)
Engine Specifications
Speed Range 2900 rpm
Emissions EPA Tier 3 Recreational, IMO II, RCD 2016
Aspiration Turbocharged, aftercooled
Bore 4 in
Stroke 5 in
Displacement 427 in3
Rotation (from flywheel end) Counterclockwise
Configuration In-line 6, 4-Stroke-Cycle Diesel
Aspiration Turbocharged, aftercooled
Bore 4 in
Configuration In-line 6, 4-Stroke-Cycle Diesel
Displacement 428 in³
Emissions IMO II, U.S. EPA Tier 3, RCD II, China II
Rotation from Flywheel End Counterclockwise
Speed Range 2900 rpm
Stroke 5 in
Dimensions & Weights
Length of Engine 55 in
Height 35 in
Width of Engine 31 in
Engine Dry Weight - Approximate 1,676 lb
Height 35 in
Length - Engine 43 in
Width - Engine 31 in

Reliability & Durability

Superior response time and acceleration for better maneuverability and safety; Grid heater for improved cold weather starting; Electrical advantages with 12V or 24V electrical system; Highest standard paint quality

Easy to use

Compatible with Cat® Displays to monitor all vessel operations; Available engine-mounted display panel with start, stop, and engine diagnostic; Single access point improves serviceability; Wiring harnesses with a woven cover provide more attractive serviceable compenents; gplink ready for remote monitoring

Environment friendly

No visible smoke on start up or underway; The common rail fuel system enables optimum combustion and low emissions; Reduced combustion noise through advanced electronic control; Closed crankcase ventilation system improves engine room cleanliness; Electronically controlled supercharger provides industry-leading torque and throttle response at low speeds, while maintaining fuel efficiency at high speeds

  • Air Inlet System
    • Air cleaner/fumes disposal (closed system)
    • Turbochargers, jacket water cooled
    • Aftercooler condensate drain
  • Control System
    • Cold mode start strategy
    • PWM secondary throttle
    • Cold mode start strategy
    • Electronic diagnostics and fault logging
    • Engine and transmission monitoring (temperature, pressure)
    • Electronic fuel/air ratio control
    • Engine Protection Mode for extended ambient conditions
    • Three types of throttle inputs (CAN, PWM, and 0-5V)
    • 70-pin customer connector
  • Cooling System
    • Sea water pump, gear driven, for HEX cooled engines only
    • Sea water aftercooled
    • Jacket water pump, gear driven
    • JW Heat Exchanger - Corrosion resistant shell and tube style
    • Fuel cooler
    • Expansion tank
    • Thermostat housing
    • 63mm hose bead raw water inlet
    • 50 mm hose bead raw water oulet
    • Integrated gear oil cooler
  • Exhaust System
    • Water-cooled exhaust manifold & turbocharger
    • 90mm ID round flanged exhaust outlet
  • Flywheels & Flywheel Housings
    • Flywheel Housing, SAE No. 3 - With M10 Threads
    • Flywheel, SAE 11 1/2, with 3/8 UNF threads
    • SAE standard rotation
  • Fuel System
    • High Pressure Common Rail fuel system
    • High pressure fuel system pump with integral low pressure fuel transfer pump
    • Primary fuel filter, remote mounted
    • Secondary fuel filter, LH top service location
  • Lube System
    • Crankcase breather, closed crankcase ventilation
    • Oil filter, LH top service location
    • Oil cooler
    • Oil pan, center sump
    • Oil pump, gear driven
    • Dipstick, RH service on Port, LH service on Starboard
  • Mounting System
    • Front and rear support brackets
  • General
    • Front belt and damper guard
    • Lifting eyes
    • Upper front-facing customer wiring connector and Service Tool connection
  • Protection System
    • Electronic Engine Monitoring System provides engine de-rate strategies to protect against adverse operating conditions
  • Paints
    • Engines are painted Matterhorn white with pleasure craft finish includes epoxy primer with polyurethane topcoat. Fuel lines, water lines and clamps and wiring harness will be unpainted. Standard decals and informational films will be installed. Shipped loose parts will be shipped as received from suppliers. Heat sensitive components have a textured black finish.
  • Control System
    • Instrument Panels
  • Instrumentation
    • Transmission Sensors
  • Mounting System
    • Vibration isolation mounting
×