Cat® C1.1 Diesel Engine

Cat® C1.1 Diesel Engine

Engine Configuration In-Line 3, 4-Stroke-Cycle Diesel
Cooling System Capacity 1.9 L (2 qt)
Lube System (refill) 3.4-4.4 L (3.6-4.6 qt)
Length 491 mm (19.33 in)
Width 400 mm (15.74 in)
Height 576 mm (22.7 in)
General
Engine Configuration In-Line 3, 4-Stroke-Cycle Diesel
Cooling System Capacity 1.9 L (2 qt)
Lube System (refill) 3.4-4.4 L (3.6-4.6 qt)
Bore 3 in
Stroke 3 in
Displacement 69 in³
Aspiration Naturally Aspirated (NA)/Turbocharged (T)
Compression Ratio 23.0:1
Combustion System Indirect Injection
Rotation from Flywheel End Counterclockwise
Engine Configuration In-Line 3
Bore 77 mm (3.03 in)
Stroke 81 mm (3.19 in)
Displacement 1.13 L (69 in³)
Cooling System - Capacity 1.9 L (2 qt)
Lube System - Refill 3.4-4.4 L (3.6-4.6 qt)
Aftertreatment -
Engine Dimensions (Approximate. Final dimensions dependent on selected options)
Length 491 mm (19.33 in)
Width 400 mm (15.74 in)
Height 576 mm (22.7 in)
Weight - Net Dry (Basic Operating Engine Without Optional Attachments) 87 kg (191 lb)
Power Rating
Minimum Power 19 HP
Maximum Power 24 HP
Rated Speed 2800 rpm
Maximum Torque 63 lb-ft @ 1600 rpm
Emission Standards
Emissions U.S. EPA Tier 4 Final, EU Stage V
Engine Dimensions - Approximate
Height 576 mm (22.7 in)
Length 491 mm (19.33 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 87 kg (191 lb)
Width 400 mm (15.74 in)
Weight - Net Dry - Basic Operating Engine Without Optional Attachments 211 lb
Width 16 in
Length 19 in
Height 23 in

Reliable power

Manufactured in some of the world's most modern and highly-automated production facilities, the Cat® C1.1 is proven to deliver durable power and offers a wide range of customization options that refuse to compromise quality and durablity.

Compact size

With a 18.4 kW (24 hp) power rating, the C1.1 and the C1.1 turbo allows OEMs to consider different installation, operating and commercial requirements. These models are particularly adapted to machines where power from a small
package is crucial. And for jobs that require that extra bit of power, there's a turbocharged option that delivers in almost any condition, at any altitude.

Quiet work

The stiff block and indirect injection system in the C1.1 were built for quiet so worksites are safer, operators are less
fatigued and noise levels in regulated areas aren't exceeded.

  • Air Inlet System
    • Inlet manifold with choice of inlets.
  • Control System
    • Alternator 12 volt 65 amp
    • Starter motor 12 volt
    • Glow plug starting aid
  • Cooling System
    • Belt-driven coolant pump
    • Coolant temperature switch
  • Flywheel And Flywheel Housing
    • SAE No. 6 1/2 flywheel
    • Choice of SAE No. 5 or standard backplate flywheel housing
    • U.S. EPA Tier 4 Final: Standard backplate flywheel housing and flatface flywheel
  • Fuel System
    • Fuel injection pump
    • Spin-on fuel filter
  • Lube System
    • Low profile oil pan
    • Spin-on lube oil filter
    • Lube oil pressure switch
  • Power Take Off (pto)
    • Provision for Power Take Off (PTO)
  • General
    • Cast iron, engine block
    • Cast iron exhaust manifold--side outlet
    • Cold start capability to -20° C (-4° F)
    • Paint: Caterpillar yellow, with optional colors available at request
×