C32 ACERT Tier 2 Oilfield Diesel Generator Set

C32 ACERT Tier 2 Oilfield Diesel Generator Set

Aspiration Turbocharged-Aftercooled
Bore 6 in
Stroke 6 in
Displacement 1,959 in3
Generator set control EMCP 3.1
Generator SR4B
Request a Quote
Engine Specifications
Aspiration Turbocharged-Aftercooled
Bore 6 in
Stroke 6 in
Displacement 1,959 in3
Generator set control EMCP 3.1
Generator SR4B
Fuel system MEUI
Maximum Rating 800 ekW (1000 kVA)
Minimum Rating 910 ekW (1300 kVA)
Emissions/Fuel Strategy U.S. EPA Tier 2
Manifold Type Dry
Engine Control and Protection ADEM A4
Frequency - Speed 50/60 Hz (1500/1800 rpm)
Aspiration Turbocharged-Aftercooled
Bore 6 in
Stroke 6 in
Displacement 1,959 in³
Generator Set Control EMCP 3.1
Generator SR4B
Fuel System MEUI
Dimensions
Length 206 in
Width 75 in
Height 86 in
Weight 20,500 lb
Length 206 in
Width 75 in
Height 86 in
Weight 20,500 lb
Capacity for Liquids
Fuel Diesel

Product Support Offered Through the Global Cat Dealer Network

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure opti

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Web Site

For all your petroleum power requirements, visit www.catoilandgasinfo.com.

  • Air Inlet System
    • Dual element air cleaner
    • Service indicator
  • Cooling System
    • Radiator package mounted (50° C)
    • Coolant drain line with valve at edge of base
    • Coolant level sensor
    • Fan and belt guards
    • Coolant level sight gauge
    • Cat Extended Life Coolant
    • Metal top and bottom tanks
  • Exhaust System
    • Dry exhaust manifold
    • Flange outlets
  • Fuel System
    • Primary fuel filter with integral water separator
    • Secondary fuel filters
    • Fuel priming pump
    • Flex fuel lines
    • Fuel cooler
  • Generator
    • SR4B brushless
    • Self excited
    • Class H insulation
    • Form wound
    • IP23 protection
    • Cat DVR 3-phase sensing with selectable volts/Hz
    • 3 sensing CTs and one droop CT
    • Anti-condensation space heater
  • Generator Attachments
    • Bus bar - NEMA and IEC mechanicallug holes
    • Bottom cable entry; capable of top cable entry
  • Controls
    • ADEM A4 ECU
    • EMCP 3 Control Panel
  • Lube System
    • High efficiency oil filter
    • Oil drain valves
    • Fumes disposal
    • Gear-type lube oil pump
    • Deep sump oil pan
  • Mounting System
    • Steel base frame (skidable)
    • Anti-vibration mounts (shipped loose)
    • Designed welded base for increased durability (I-beam design)
  • Starting/charging System
    • 24-volt starting motor
    • 45-amp charging alternator
    • Battery rack
    • Battery disconnect switch
    • Oversized batteries
  • General
    • Paint — Caterpillar yellow except rails and radiators (gloss black)
    • Flywheel and flywheel housing — SAE No. 0
  • Air Inlet System
    • Air inlet adapters
    • Precleaners
  • Exhaust System
    • Stainless steel exhaust flex fittings
    • Elbows, flanges, expanders, and Y adapter
  • Generator
    • Permanent magnet excitation
    • Oversize and premium generators
  • Starting/charging System
    • Jacket water heater with shutoff valves
    • Battery chargers (10 amp)
  • Controls
    • EMCP 4.2 control panel
    • EMCP 4.3 control panel
    • Local or remote annunciator panel
    • Generator temperature monitoring and protection
    • Discreet I/O module
    • Load share module (optional with direct rack)
×