C18 (SRMP) Marine Generator Set

  • Exterior View

C18 (SRMP) Marine Generator Set

Minimum Rating 260 ekW (325 kVA)
Maximum Rating 565 ekW (706 kVA)
Frequency 50 hz
Speed 50 Hz - 1500 rpm, 60 Hz - 1800 rpm
Configuration In-line 6, 4-Stroke-Cycle Diesel
Aspiration Turbocharged - aftercooled
Request a Quote Download Brochure
Generator Set Specifications
Minimum Rating 260 ekW (325 kVA)
Maximum Rating 565 ekW (706 kVA)
Frequency 50 hz
Speed 50 Hz - 1500 rpm, 60 Hz - 1800 rpm
Minimum Rating 260 ekW (325 kVA)
Maximum Rating 565 ekW (706 kVA)
Frequency 50 hz
Speed 50 Hz - 1500 rpm, 60 Hz - 1800 rpm
Engine Specifications
Configuration In-line 6, 4-Stroke-Cycle Diesel
Aspiration Turbocharged - aftercooled
Bore 6 in
Stroke 7 in
Fuel System MEUI
Configuration In-line 6, 4-Stroke-Cycle Diesel
Aspiration Turbocharged - aftercooled
Bore 6 in
Stroke 7 in
Generator Set Dimensions (Keel and Hex Cooled)
Length 120 in
Height 65 in
Generator Set Dimensions (Radiator Cooled)
Length 56 in
Height 95 in
Generator Set Configurations
Emissions EPA Tier 3, IMO II, EU IW
Generator Specifications
Excitation SRMP
Insulation Class H
IP Rating IP23 (standard), IP 44 (optional)
Voltage Regulator CDVR (Digital Voltage)
Generator Set Dimensions - Keel and Hex Cooled
Width 56 in
Weight - Approximate 9,747 lb
Height 65 in
Length 120 in
Generator Set Dimensions - Radiator Cooled
Width 67 in
Weight - Approximate 13,396 lb
Height 95 in
Length 56 in

Separate circuit aftercooling system

The primary advantage of the separate circuit aftercooling system (SCAC) is that no sea water circulates through the aftercooler

Emissions

EPA Tier 3 compliant, IMO II and EU IWW compliant

Cooling system

Heat exchanger and Keel cooled options for all ratings

Turbo Configurations

Single turbo configurations for all ratings

Competitive size and weight

Marine Certifications

All major MCS type approvals available from factory

  • Air Inlet System
    • Separate circuit after-cooled (SCAC)
    • Heavy-duty inlet air filter
  • Cooling System
    • SCAC pump, gear driven, for HEX cooled engines only
    • Jacket water pump, gear driven
    • SCAC and JW shunt tanks for maintaining proper pump inlet pressures
  • Exhaust System
    • Water-cooled exhaust manifold & turbocharger
    • Round flanged exhaust outlet
  • Fuel System
    • Hybrid fuel lines
    • MEUI™ fuel system
    • Fuel filter, front service
    • Fuel transfer and priming pumps
  • Lube System
    • Center sump oil pan, deep
    • Front and top service oil filler locations
    • Front service dipstick
  • Mounting System
    • Vibration Isolators
    • Formed C-channel rails
  • Control System
    • Electronic fuel/air ratio control
    • SRMP permanent magnet 12-lead generator
    • Digital voltage regulator
    • Class H insulation, Class F temperature rise, IP23 protection
  • Exhaust System
    • Dry Elbows
    • Water-Cooled Elbows
    • Flexible Fitting
    • Flange
    • Muffler
    • Muffler, Spark Arresting
    • Fumes disposal (closed system)
  • Air Inlet System
    • Air Inlet Adapter
  • Charging System
    • Battery Chargers 10 amp
    • Battery sets: 24V 950-1300 CCA
    • Charging alternator 24V 105 amp
  • Control System
    • Caterpillar alarm and protection
    • EMCP 4.2 control panel
    • MGCP III B control panel
  • Fuel System
    • Duplex fuel filter – front service
    • Fuel cooler
    • Primary fuel/water separator
  • Instrumentation
    • Generator service side - LH, RH
    • Generator terminal box extension
    • Load sharing module (option for type approved module)
  • Lube System
    • Spare pump kits
    • Duplex oil filter – front service
    • Manual sump pump
  • Mounting System
    • Vibration Isolators
  • Protection System
    • Generator protection - IP44
  • Starting System
    • Starting motors - electric and/or air
    • Jacket water heaters
×