H110 S Hydraulic Hammer

Overview
Impact Energy Class
2,000 ft-lbf
Blows per Minute
450-1000
Min. Rated Flow
16 gal/min

Dimensions

Impact Energy Class
2,000 ft-lbf
Blows per Minute
450-1000
Min. Rated Flow
16 gal/min
Max. Rated Flow
32 gal/min
Max. Operating Weight
2,381 lb
Minimum Operating Weight
2,095 lb
Maximum Operating Pressure
2,321 psi
Minimum Operating Pressure
2,176 psi
Maximum Carrier Weight
39,700 lb
Minimum Carrier Weight
24,300 lb
Tool Diameter
4 in
Impact Energy Class
2,000 ft·lbf
Blows per Minute
450-1000
Maximum Operating Weight
2,381 lb
Maximum Rated Flow
32 gal/min
Minimum Rated Flow
16 gal/min
Tool Shaft Diameter
4 in
Impact Energy Class
2,000 ft·lbf
Blows per Minute
450-1000
Minimum Operating Weight
2,095 lb
Maximum Operating Weight
2,381 lb
Minimum Rated Flow
16 gal/min
Maximum Rated Flow
32 gal/min
Minimum Operating Pressure
2,176 psi
Maximum Operating Pressure
2,321 psi
Tool Shaft Diameter
4 in
Minimum Carrier Weight
24,300 lb
Maximum Carrier Weight
39,700 lb

Increase Production

<ul><li>Hammer hits with consistent power, delivering constant production.</li><li>Operation cycle is more efficient – less waste in internal heat, more power delivered to the tool.</li><li>Piston and tool are matched in diameter and mass, greatly increasing efficiency in power transmission.</li><li>Blow frequency, hydraulic pressure and impact energy have been tuned to produce the highest possible work rates on Cat machines.</li></ul>

Lower Maintance Costs

<li>No need for constant checking of the gas charge.</li> Design keeps gas pressure steady through the duration of the annual service interval.</li>
<li>All daily checks and routine service can be performed with the hammer attached to the machine.</li><li>Spend more time working and less time on service.</li> Greasing can be performed quickly from one standing-height grease point.</li><li>Service the lower bushing in the field using simple hand tools.</li>
<li>Lower bushing is rotatable – more service life lower parts cost.</li>
<li>Optional on-board autolube provides continual greasing as the hammer runs, protecting your investment.</li><li>Available for extreme environments, the optional wear package protects the hammer housing from damage.</li></ul>

Easy to Operate

<li>Auto shut off prevents blank firing, the leading cause of user-induced damage to hammers.</li><li>On a Next Gen Cat Excavator, hammers are protected by Auto-Stop, preventing damage from over-hammering in a single spot.</li><li>This feature helps prevent damage to your machine and premature damage to your hammer, even with inexperienced operators
<li>Performance Hammers lead in both operator comfort and machine protection.</li> The buffering system qualitatively dampens vibration to the machine due to proprietary buffering material.</li> <li>Can be configured for joystick or foot pedal control to suit your operating preference.</li></ul>

Next Level Technology

<ul><li>All models include Product Link technology standard, you can locate the hammer via the Cat App on your phone.</li><li>When paired with a Next Gen Cat excavator, the hammer is automatically recognized and configured
<li>Cat hammer dimensions are included in Cat E-Fence technology – protects the cab, and keeps the hammer in safe areas on the job site.</li><li>Hammer pressure and flow controls can be monitored and configured via the in-cab monitor – manually or automatically.</li></ul>

×