AP300F

Overview
Gross Power
74 hp
Standard Paving Range
1.75 m to 3.42 m (5.6 ft to 11.1 ft)
Operating Weight with SE34 VT Screed
18,078 lb

Engine

Gross Power
74 hp
Engine Model
C3.3B
Gross Power
74 HP
Engine Model
C3.3B

Operating Specifications

Standard Paving Range
1.75 m to 3.42 m (5.6 ft to 11.1 ft)
Maximum Paving Speed
200 ft/min
Maximum Paving Width
13 ft
Minimum Paving Width
28 in
Maximum Travel Speed
10 mph
Standard Paving Range
1.75 - 3.42 m (5.6' - 11.1')
Maximum Paving Speed
200 ft/min
Maximum Paving Width
13 ft
Maximum Travel Speed
10 mile/h

Weights

Operating Weight with SE34 VT Screed
18,078 lb
Operating Weight with SE34 V Screed
17,637 lb
Tractor Weight
14,550 lb
Tractor Weight
14,550 lb
Operating Weight - With SE34 V
17,637 lb
Operating Weight - With SE34 VT
18,078 lb

Dimensions

Wheelbase
6 ft
Transport Height
9 ft
Operating Width
10 ft
Operating Height with Canopy
11 ft
Transport Length
16 ft
Truck Entry Width
10 ft
Operating Length
17 ft
Transport Width
6 ft
Operating Height - With Canopy
11 ft
Truck Entry Height
22 in
Truck Entry Width
10 ft
Wheel Base
6 ft
Operating Width
10 ft
Transport Height
9 ft
Transport Length
16 ft
Operating Length
17 ft
Transport Width
6 ft

Service Refill Capacities

Fuel Tank
29 gal
Washdown Spray Tank
6 gal (US)
Fuel Tank
29 gal (US)

High Efficiency Powertrain

  • Advanced Eco-mode modifies engine speed to save fuel and reduce sound levels, leading to lower operating costs and better work site communication.
  • Three steering/travel modes provide alternative control options for paving, traveling, and maneuvering around the job site.
  • Pave mode enables a paving speed up to 61 mpm (200 fpm), while travel mode offers a quick speed of 16 kph (10 mph).
  • Maneuver mode offers tight turning capability for easier positioning in compact areas.

More Traction

  • Large, hydroflated, 365/80 R20 drive tires combine with the front wheel assist option to deliver 20% more traction for those tough working conditions that include heavy loads and soft base materials.

Automation Enhances Material Flow

  • Consistent paving starts can lead to smoother pavement. At the beginning of each pass, the auto-fill material feed system activates the augers and conveyors and moves material across the face of the screed until the material reaches the set points of the feed sensors. This consistency allows the operators to quickly fine tune the feeder system speeds for smooth material flow in front of the screed.

Technology Enhancements

  • Technology enhancements optimize operator performance. The material feed system can be activated with a single switch for quick setup. Each auger and each conveyor can also be activated individually in manual or automatic mode when certain conditions exist.

Advanced Control

  • Advanced hopper controls enhance operator efficiency by allowing more focus to be on the work site.
  • The advanced control activates the hopper fold or retract function with a single touch. The operator doesn't have to press the switch through the entire travel cycle.

Cleanout and Warm-Up Mode

  • The cleanout and warm-up mode activates the augers, conveyors, and tamper bars (if equipped) at slow speed enabling for the application of inhibitors that help prevent material build-up.

Comfort and Visibility

  • Providing reliable machine control in inclement weather can be a challenge.
  • Water resistant consoles provide excellent reliability and meet IP67 common water submergence ratings.
  • The switches have been tested to one million cycles without failure. If a failure does occur, grouped components are serviceable and it's not necessary to replace the entire console.
  • Raised switch design and adjustable brightness controls simplify nighttime operation, while the touch screen LCD displays allow for customization.
  • Multiple language options and large symbols accomodate crew diversity.

Electric Heat

  • The electric heat control panel utilizes touch-pad technology and LED indicator lights to create a user-friendly interface.
  • Three pre-set temperature settings for each screed section ensure even-heat distribution and manual adjustments provide override capability. On-board diagnostics enable the operator to verify fault indicators.

Tamper Bar Screed

  • The SE34 VT combines vibratory screed plates and tamper bars to optimize density behind the screed.
  • Variable speed settings for tamping speed and vibratory speed help fine tune the system to maximize mat quality.

Quick-Change Heating Elements

  • The screed plate heating elements easily slide out for fast replacement in the event that a failure occurs.
  • The technologically advanced monitoring system automatically keeps the screed plates heating if a temperature sensor fails.
×