907M Compact Wheel Loader - Thompson Machinery

Exterior View
Interior View

Engine

Maximum Gross Power: ISO 14396 (DIN): 74 hp
Net Power: 74 hp
Engine Model: Cat® C3.3B DIT*
Rated net power @ 2,400 rpm – SAE J1349: 73 hp
Rated net power @ 2,400 rpm – ISO 9249 (1977)/EEC 80/1269: 74 hp
Emissions: *The Cat C3.3B DIT engine meets U.S. EPA Tier 4 Final/EU Stage IIIB emission standards or Tier 4 Interim/Stage IIIA equivalent emission standards.
Maximum Gross Power - ISO 14396: 73 HP
Maximum Gross Power - SAE J1995: 74 HP
Maximum gross torque – ISO 14396: 192 lbf-ft
Maximum net torque – SAE J1349: 189 lbf-ft
Maximum net torque – ISO 9249 (1977)/EEC 80/1269: 191 lbf-ft
Displacement: 201 in3
Bore: 4 in
Stroke: 5 in
Note: Net power ratings are tested at the reference conditions for the specified standard.
Note: Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Note: No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note: Flywheel per the SAE reference conditions with the fan at maximum speed.
Note: The Cat C3.3B Tier 4 Final/Stage IIIB uses an active regeneration system which requires no operator interaction under normal conditions.
Maximum Gross Power: 73 hp
Note (8): Tier 4 Final machines will not be offered or sold into Europe.
Net Power: 74 HP
Emissions: *The Cat C3.3B DIT engine meets EU Stage V/U.S. EPA Tier 4 Final emission standards.
Rated Net Power - ISO 9249: 73 HP
Engine Model: Cat® C3.3B DIT*
Maximum Gross Power - ISO 14396 (DIN): 74 HP
Rated Net Power - 2,400 rpm - ISO 9249 (1977)/EEC 80/1269: 74 HP
Rated Net Power - 2,400 rpm - SAE J1349: 72 HP
Maximum Gross Power: 73 HP
Bore: 4 in
Displacement: 201 in³
Maximum Gross Torque - ISO 14396: 192 ft·lbf
Maximum Net Torque - ISO 9249 (1977)/EEC 80/1269: 191 ft·lbf
Note (1): Net power ratings are tested at the reference conditions for the specified standard.
Note (2): Net power shown is the power available at the flywheel when the engine is equipped with alternator, air cleaner, diesel exhaust filter, and fan at minimum speed.
Note (3): No derating required up to 3000 m (10,000 ft) altitude. Auto derate protects hydraulic and transmission systems.
Note (4): Flywheel per the SAE reference conditions with the fan at maximum speed.
Note (5): The Cat C3.3B DIT Tier 4 Final/Stage V uses an active regeneration system which requires no operator interaction under normal conditions.
Stroke: 5 in
Note (6): Stage V engine available for Europe only.
Note (7): Tier 4 Final engine will be offered for North America and Japan.
Note (8): Tier 4 Final machines will not be offered or sold into Europe.
Maximum Gross Power - DIN ISO 14396: 74 HP
Maximum Gross Power - ISO 14396 (metric): 74 HP
Rated Net Power - 2,400 rpm - ISO 9249: 73 HP
Maximum Net Torque - ISO 9249: 191 ft·lbf

Weights

Operating Weight: 12,677 lb
Note: Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. – 907M is configured w
Operating Weight: 12,677 lb
Note: Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort ROPS cab, standard flow hydraulics and skid-steer coupler. The 907M is configured
Note: Specifications shown are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, Dunlop 405/70 SPT9 tires, full fuel, comfort EROPS cab, standard flow hydraulics and skid-steer coupler. ï¿½ 907M is configured

Operating Specifications

Rated Bucket Capacity: 1 yd3
Full Turn Tipping Load: 7,716 lb
Tipping load – straight (ISO 14397-1): 9,007 lb
Tipping load – full turn (ISO 14397-1): 7,339 lb
Clearance: full lift and 45° dump: 8 ft
Reach: full lift and 45° dump: 3 ft
Steering articulation angle each direction: 39°
Rated Bucket Capacity: 1 yd³
Clearance - Full Lift and 45° Dump: 8 ft
Full Turn Tipping Load: 7,716 lb
Reach - Full Lift and 45° Dump: 3 ft
Steering Articulation Angle - Each Direction: 39°
Tipping Load - Full Turn - ISO 14397-1: 7,339 lb
Tipping Load - Straight - ISO 14397-1: 9,007 lb

Loader Hydraulic System

Maximum flow – implement pump: 19 gal/min
Maximum flow – implement pump: Auxiliary function standard flow: 19 gal/min
Maximum flow – implement pump: Auxiliary function high flow: 31 gal/min
Relief pressure – tilt cylinder head: 4,496 psi
3rd function maximum working pressure: 3,408 psi
Maximum Working Pressure - Implement Pump: 3,408 psi
Relief Pressure - Tilt Cylinder Rod: 2,756 psi
Boost flow maximum pressure: 3,191 psi
Lift cylinder: double acting – Bore diameter: 3 in
Lift cylinder: double acting – Rod diameter: 2 in
Lift cylinder: double acting – Stroke: 27 in
Tilt cylinder: double acting – Bore diameter: 4 in
Tilt cylinder: double acting – Rod diameter: 2 in
Tilt cylinder: double acting – Stroke: 16 in
Hydraulic cycle times (1,800 rpm): Raise (ground level to maximum lift): 6 seconds
Hydraulic cycle times (1,800 rpm): Dump (at maximum lift height): 2 seconds
Hydraulic cycle times (1,800 rpm): Float down (maximum lift to ground level): 3 seconds
Hydraulic cycle times (1,800 rpm): Total cycle time: 10 seconds
Hydraulic cycle times (1,000 rpm): Raise (ground level to maximum lift): 10 seconds
Hydraulic cycle times (1,000 rpm): Dump (at maximum lift height): 3 seconds
Hydraulic cycle times (1,000 rpm): Float down (maximum lift to ground level): 3 seconds
3rd Function Maximum Working Pressure: 3,408 psi
Maximum Flow - Implement Pump: 19 gal/min
Maximum Flow - Implement Pump - Auxiliary Function High Flow: 31 gal/min
Maximum Flow - Implement Pump - Auxiliary Function Standard Flow: 19 gal/min
Relief Pressure - Tilt Cylinder Head: 4,496 psi
Boost Flow Maximum Pressure: 3,191 psi
Hydraulic Cycle Time - 1,000 rpm - Dump, at Maximum Lift Height: 3 s
Hydraulic Cycle Time - 1,000 rpm - Float Down, Maximum Lift to Ground Level: 3 s
Hydraulic Cycle Time - 1,000 rpm - Raise, Ground Level to Maximum Lift: 10 s
Hydraulic Cycle Time - 1,800 rpm - Dump, at Maximum Lift Height: 2 s
Hydraulic Cycle Time - 1,800 rpm - Float Down, Maximum Lift to Ground Level: 3 s
Hydraulic Cycle Time - 1,800 rpm - Raise, Ground Level to Maximum Lift: 6 s
Hydraulic Cycle Time - 1,800 rpm - Total Cycle Time: 10 s
Lift Cylinder, Double Acting - Bore Diameter: 3 in
Lift Cylinder, Double Acting - Rod Diameter: 2 in
Lift Cylinder, Double Acting - Stroke: 27 in
Tilt Cylinder, Double Acting - Bore Diameter: 4 in
Tilt Cylinder, Double Acting - Rod Diameter: 2 in
Tilt Cylinder, Double Acting - Stroke: 16 in

Service Refill Capacities

Cooling system: 5 gal
Fuel tank: 21 gal
Hydraulic system (including tank): 19 gal
Engine crankcase: 3 gal
Transmission (gear box): 2 gal
Axles – Front: N/A
Axles – Rear: N/A
Hydraulic tank: 12 gal
Cooling System: 5 gal (US)
Engine Crankcase: 3 gal (US)
Fuel Tank: 21 gal (US)
Hydraulic System - Including Tank: 19 gal (US)
Axles - Front: N/A
Axles - Rear: N/A
Hydraulic Tank: 12 gal (US)
Transmission - Gear Box: 2 gal (US)
Engine Oil: 3 gal (US)

Dimensions with Bucket (Approximate): Standard Lift – with ISO Coupler

Height: ground to cab**: 8 ft
Height: ground clearance**: 11 in
Length: wheel base: 7 ft
Length: overall*: 18 ft
Reach: bucket at 45°*: 2 ft
Dig depth**: 4 in
Clearance: bucket at 45°*: 8 ft
Clearance: level bucket**: 10 ft
Height: bucket pin**: 11 ft
Width: bucket: 7 ft
Width: tread center: 5 ft
Turning radius: over bucket: 15 ft
Turning radius: inside of tires: 7 ft
Machine width: 6 ft
Dump angle at full lift: 45°
Departure angle: 33°
Articulation angle: 39°
Operating weight: 12,913 lb
Note: *Vary with bucket.
Note: **Vary with tire.
Note: Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

Dimensions with Bucket (Approximate): Standard Lift – with SSL Coupler

Height: ground to cab**: 8 ft
Height: ground clearance**: 11 in
Length: wheel base: 7 ft
Length: overall*: 18 ft
Reach: bucket at 45°*: 3 ft
Dig depth**: 4 in
Clearance: bucket at 45°*: 8 ft
Clearance: level bucket**: 10 ft
Height: bucket pin**: 11 ft
Width: bucket: 7 ft
Width: tread center: 5 ft
Turning radius: over bucket: 15 ft
Turning radius: inside of tires: 7 ft
Machine width: 6 ft
Dump angle at full lift: 45°
Departure angle: 33°
Articulation angle: 39°
Operating weight: 12,913 lb
Note: *Vary with bucket.
Note: **Vary with tire.
Note: Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.

Buckets

Bucket Capacities: 0.75 m3-1.2 m3 (1.0 yd3-1.6 yd3)
General purpose: 1 yd3
Light material: 2 yd3
Bucket Capacities: 0.75-1.5 m3 (1.0-2.0 yd3)
General Purpose: 1 yd³
Light Material: 1.2 m³ (1.6 yd³), 1.5 m³ (2.0 yd³)
General Purpose: 0.8 m³ (1 yd³), 0.9 m³ (1.2 yd³), 1.0 m³ (1.3 yd³), 1.1 m³ (1.4 yd³), 1.3 m³ (1.7 yd³)
Grapple: 0.9 m³ (1.2 yd³) heaped
Multi-Purpose: 0.75 m³ (1.0 yd³), 0.9 m³ (1.2 yd³), 1.05 m³ (1.37 yd³)
Note: All capacities are applicable for each model. Bucket selection must be made with an understanding of the material density and application to ensure machine stability is maintained within the tipping loads stated per model and configuration.
Bucket Capacities - ISO Coupler: 0.75-1.5 m3
Bucket Capacities - SSL Style Coupler: 1.0-2.0 yd3

Steering

Steering articulation angle each direction: 39°
Steering cylinder: double acting – Bore diameter: 3 in
Steering cylinder: double acting – Rod diameter: 1 in
Steering cylinder: double acting – Stroke: 12 in
Nominal flow – steering pump: 12 gal/min
Maximum working pressure – steering pump: 3,191 psi
Maximum steering torque – 0° (straight machine): 37,155 lbf-ft
Maximum steering torque – 39° (full turn): 27,747 lbf-ft
Steering ac cycle times (full left to full right) – 2,620 rpm: 3 seconds
Number of steering wheel turns – Full left to full right or full right to full left: <6 turns
Maximum Steering Torque - 0° (Straight Machine): 37,155 ft·lbf
Maximum Steering Torque - 39° (Full Turn): 27,747 ft·lbf
Maximum Working Pressure - Steering Pump: 3,191 psi
Nominal Flow - Steering Pump: 12 gal/min
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left: <6 turns
Steering AC Cycle Times - Full Left to Full Right - 2,620 rpm: 3 s
Steering Articulation Angle - Each Direction: 39°
Steering Cylinder, Double Acting - Bore Diameter: 3 in
Steering Cylinder, Double Acting - Rod Diameter: 1 in
Steering Cylinder, Double Acting - Stroke: 12 in

Drive Train

Forward – Range 1: 6 mph
Forward – Range 2: 12 mph
Forward – High range: 22 mph
Reverse – Range 1: 6 mph
Reverse – Range 2: 12 mph
Reverse – High range: 22 mph
Forward - High Range: 22 mile/h
Forward - Range 1: 6 mile/h
Forward - Range 2: 12 mile/h
Reverse - High Range: 22 mile/h
Reverse - Range 1: 6 mile/h
Reverse - Range 2: 12 mile/h

Tires

Option: 335/80 R18 XZSL Michelin
Option: 340/80 R18 AT-R Firestone
Option: 340/80 R18 XMCL Michelin
Option: 340/80 R18 TRI2 Nokian
Option: 340/80 R18 Bibload Michelin
Option: 405/70 R18 SPT9 Dunlop*
Option: 12.5/80 R18 Flexport™
Note: *Standard tire.
Note: Other tire choices available, contact your Cat dealer for details.
Note: In certain applications, the loader’s productive capabilities may exceed the tires’ tonnes-km/h (ton-mph) capabilities.
Note: Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Note (1): *Standard tire.
Note (2): Other tire choices available, contact your Cat dealer for details.
Note (3): In certain applications, the loader's productive capabilities may exceed the tires' tonnes-km/h (ton-mph) capabilities.
Note (4): Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Option (1): 335/80 R18 XZSL Michelin
Option (2): 340/80 R18 AT-R Firestone
Option (3): 340/80 R18 XMCL Michelin
Option (4): 340/80 R18 TRI2 Nokian
Option (5): 340/80 R18 Bibload Michelin
Option (6): 405/70 R18 SPT9 Dunlop*
Option (7): 12.5/80 R18 Flexport™

Cab

ROPS: SAE J1040 MAY94, ISO 3471-1994.
FOPS: SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II.
Note: Cat cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note: When properly installed and maintained, the cab offered by Caterpillar, when tested with doors, and windows closed as per work cycle procedures specified in ISO 6395 2008, results in operator sound exposure Leq (Equivalent sound pressure level) of 66 dB(A
ROPS: ROPS: ISO 3471:2008
FOPS: FOPS: ISO 3449:2005 Level II
Note (1): Cat Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2): The declared dynamic operator Sound Pressure level per ISO 6396:2008*, when the cab is properly installed and maintained, is 75 dB(A). The labeled sound power level for the CE marked configurations when measured according to the test procedure and conditi
Note (3): *The measurements were conducted with the cab doors and windows closed.

Dimensions with Bucket (Approximate) - Standard Lift - With ISO Coupler

Articulation Angle: 39°
Clearance - Bucket at 45° *: 8 ft
Clearance - Level Bucket**: 10 ft
Departure Angle: 33°
Dig Depth**: 4 in
Dump Angle at Full Lift: 45°
Height - Bucket Pin**: 11 ft
Height - Ground Clearance**: 11 in
Height - Ground to Cab**: 8 ft
Length - Overall*: 18 ft
Length - Wheel Base: 7 ft
Machine Width: 6 ft
Note (1): *Vary with bucket.
Note (2): **Vary with tire.
Note (3): Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Operating Weight: 12,913 lb
Reach - Bucket at 45°*: 2 ft
Turning Radius - Inside of Tires: 7 ft
Turning Radius - Over Bucket: 15 ft
Width - Bucket: 7 ft
Width - Tread Center: 5 ft

Dimensions with Bucket (Approximate) - Standard Lift - With SSL Coupler

Articulation Angle: 39°
Clearance - Bucket at 45° *: 8 ft
Clearance - Level Bucket**: 10 ft
Departure Angle: 33°
Dig Depth**: 4 in
Dump Angle at Full Lift: 45°
Height - Bucket Pin**: 11 ft
Height - Ground Clearance**: 11 in
Height - Ground to Cab**: 8 ft
Length - Overall*: 18 ft
Length - Wheel Base: 7 ft
Machine Width: 6 ft
Note (1): *Vary with bucket.
Note (2): **Vary with tire.
Note (3): Dimensions listed are for a machine configured with general purpose buckets, bolt-on cutting edges, 75 kg (165 lb) operator, no air conditioner and Dunlop 405/70 SPT9 tires.
Operating Weight: 12,913 lb
Reach - Bucket at 45°*: 3 ft
Turning Radius - Inside of Tires: 7 ft
Turning Radius - Over Bucket: 15 ft
Width - Bucket: 7 ft
Width - Tread Center: 5 ft

Engine - Tier 4 Final/Stage IV

Maximum Net Torque - SAE J1349: 189 ft·lbf

High Performance

With its high full turn tipping loads and breakout forces, the M Series delivers a powerful solution for all customer applications.

Ease of Operation

State of the art electro-hydraulic system provides low effort, fine control with fast cycle times. The all-in-one joystick helps keep eyes on the work. Machine responsiveness can be adjusted with the push of a button, which allows you to set up the machine exactly the way you want it based on the application.

Comfortable Cab

High visibility cab increases comfort with an available deluxe seat, intuitive controls and settings. Optional soft touch pad contains new electronic functions and settings including Implement Modulation and Hystat Aggressiveness, Ride Control, Return to Dig, Lift Kickout, Engine Speed Control, and Rimpull Control. Optional built-in Machine Security System prevents machine theft.

Cat Optimized Z-bar Loader Linkage

The Cat optimized Z-bar loader linkage combines the digging efficiency of a traditional Z-bar with tool carrier capabilities for great performance and versatility. With parallel lift and high tilt forces throughout the working range you can safely and confidently handle loads with precise control.

Power Train

Heavy duty axles and 100% diff-lock come standard on both the 20 km/h (12 mph) standard speed machine as well as the 35 km/h (22 mph) high speed option. Ride control is also available as an option, for added comfort and load retention when having to travel longer distances.

Versatility

Whether using a horizontal style coupler (HPL-ISO or HPL-A) or the Skid Steer Loader (SSL) style coupler, combined with standard flow or optional high flow hydraulics, the Cat Compact Wheel Loaders can use a large range of work tools including hydro mechanical work tools.

Serviceability

The design of the M Series allows quick and easy servicing. Tilt up engine hood and side service doors give exceptional access to the major components safely from ground level. S·O·Soil ports and pressure test points enable easy preventative maintenance.

Transmission And Hydraulics
- 18° frame oscillation, 78° articulation
- Demand based cooling fan
- Hydrostatic drive
- Loader arm float function
- Parallel lift Z-bar loader
- Proportional auxiliary hydraulic circuit
- Transmission, 20 km/h (12.4 mph) with heavy duty axles
- Transmission inching function
Engine
- Cat C3.3B DIT EU Stage V/U.S. EPA Tier 4 Final engine.
- Cat extended life coolant
- Closed circuit breather
- Easy quick release fuel filter/water separator
- ECO mode
- Engine oil drain valve (non-spill ECO drain)
- Lockable engine compartments
- Two stage air cleaner with visual indicator
Electrical
- Alternator 90 amp
- Battery disconnect switch
- Cab mounted fuse panel
- Engine cold starter aid
- Heavy duty battery, 12V
- Service point connector for electronic diagnosis (Cat Electronic Technician^™)
- Reversing alarm
General
- E-coat paint primer
- Pressure test points
- Recovery hitch and pin
- Scheduled Oil Sampling S·O·SSM ports
Operator Environment
- Adjustable internal mirror
- Adjustable wrist rest
- Auxiliary power sockets
- Coat hook
- Cup holder
- Digital service hour meter
- Easy clean cab floor
- Gauges: fuel hydraulic temperature, coolant temperature, speedometer
- Multifunction joystick with direction control
- On board digital display cluster
- Operator station on isolation mounts
- Retractable seat belt
- ROPS and FOPS certified canopy/cab
- Sound suppression
- Sun visor
- Suspended brake/accelerator pedals
- Suspension seat
- Two doors (enclosed cab)
- Two external knock back mirrors
- Warning indicators for major systems
- Wiper/washer front and rear (enclosed cab)
- Warnings: master, park brake, hydraulic oil pressure, engine oil pressure, coolant temp, electrical system, hydraulic filter bypass

Transmission And Hydraulics
- 100% differential lock on both axles, selectable on the move
- Adjustable speed control (creeper control)
- Adjustable high stat response settings
- Electronic throttle lock
- Ride control
- Rimpull control
- Speeder, 35 km/h (21.7 mph) with secondary steering
Engine
- Engine block heater 120V
- Precleaner for engine air filter
Electrical
- Machine Security System (MSS)
- Magnetic rotating beacon
- Halogen working lights, two front and two rear
- LED working lights, two front and two rear
- Work tool wiring harness
General
- Custom color
- Rear light guards
- Tire options including heavy duty tires
Fluids
- Cat extended life coolant (–50° C/–58° F)
Loader
- Adjustable implement modulation
- High flow auxiliary hydraulics with pressure relieving quick disconnect manifold
- Load check valves
- Return To Dig tool positioner
Work Tools
- For all work tool options, consult your local Cat dealer
Operator Environment
- Air conditioning
- Cabin light
- Cat Radio/FM/DAB+/Bluetooth/Aux/Mic/Phone/USB
- Comfort cab includes: cloth suspension seat, heated rear window, sliding left window and radio ready
- Open canopy: fixed steering column, coat hook, sun visor (North America only)
- Deluxe cab includes: Comfort cab options plus heated cloth air suspension seat with lumbar support and right sliding window
- Heated rear window (enclosed cab)
- Heater with window side and feet vents (enclosed cab)
- Radio ready kit including speakers (enclosed cab)
- Rear blind

My.Cat.Com Login