D9T Dozer

Overview
Number of Carrier Rollers
1 per side (optional)
1 Forward - Drawbar Pull
161,000 lbf
2 Forward - Drawbar Pull
90,000 lbf
  • Exterior View
  • Interior View

Undercarriage

Number of Carrier Rollers
1 per side (optional)
Length of Track on Ground
137 in
Shoe Type
Extreme Service
Width - Shoe
24 in
Shoes/Side
43
Grouser Height
3 in
Pitch
9 in
Ground Clearance
24 in
Track Gauge
89 in
Ground Contact Area
6,569 in²
Track Rollers/Side
8
Length - Track on Ground
137 in
Number of Carrier Rollers
1 per side (optional)

Transmission

1 Forward - Drawbar Pull
161,000 lbf
2 Forward - Drawbar Pull
90,000 lbf
3 Forward - Drawbar Pull
50,000 lbf
1 Forward
2 mile/h
2 Forward
4 mile/h
3 Forward
7 mile/h
1 Reverse
3 mile/h
2 Reverse
5 mile/h
3 Reverse
9 mile/h
1 Forward - Drawbar Pull
161,000 lbf
2 Forward - Drawbar Pull
90,000 lbf
3 Forward - Drawbar Pull
50,000 lbf

Service Refill Capacities

Fuel Tank
217 gal
Cooling System
26 gal
DEF Tank
10 gal
Note
*With oil filters.
Engine Crankcase*
10 gal (US)
Power Train
43 gal (US)
Final Drive - Each
4 gal (US)
Roller Frames - Each
12 gal (US)
Pivot Shaft Compartment
8 gal (US)
Hydraulic Tank Oil - Only
24 gal (US)
Fuel Tank
217 gal (US)
Cooling System
26 gal (US)
DEF Tank
10 gal (US)
Note
*With oil filters.

Winches

Flange Diameter
24 in
Overall Winch
48 in
Winch Model
PA 140VS
Weight*
3,950 lb
Oil Capacity
4 gal (US)
Increased Tractor Length
22 in
Drum Width
13 in
Note
*Weight shown is base winch only. Does not include mounting arrangement, control arrangement, oil, or wire rope. With counterweight: 3700 kg (8,150 lb).
Wire Cable Diameter – Recommended
1 in
Wire Cable Diameter – Optional
1 in
Maximum drum capacity – Recommended Cable Length
257 ft
Maximum drum capacity – Optional Cable Length
204 ft
Wire Cable Ferrule Size – Outside Diameter
2 in
Wire Cable Ferrule Size – Length
3 in
Maximum Drum Capacity - Optional Cable Length
204 ft
Maximum Drum Capacity - Recommended Cable Length
257 ft
Wire Cable Diameter - Optional
1 in
Wire Cable Diameter - Recommended
1 in
Wire Cable Ferrule Size - Length
3 in
Wire Cable Ferrule Size - Outside Diameter
2 in

Engine

Emissions
U.S. EPA Tier 4 Final and EU Stage IV
Flywheel Power
436 HP
Emissions
U.S. EPA Tier 4 Final and EU Stage IV

Standards

FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria SAE J1040 May 94, ISO 3471:1994.
FOPS
FOPS (Falling Object Protective Structure) meets ISO 3449:2005 Level II.
ROPS
ROPS (Rollover Protective Structure) offered by Caterpillar for the machine meets ROPS criteria SAE J1040 May 94, ISO 3471:1994.

Dimensions

Length Basic Tractor with Drawbar
204 in
Length Basic Tractor with Winch
218 in
Length with Multi-Shank Ripper
257 in
Length with SU-Blade**
271 in
Length with Single-Shank Ripper
257 in
Length with U-Blade
274 in
Overall Length (SU-Blade/SS Ripper)
324 in
Overall Length Basic Tractor
193 in
Track Gauge
89 in
Width over Trunnions
130 in
Width without Trunnions (Standard Shoe)
113 in
Drawbar Height (Center of Clevis)*
30 in
Length of Track on Ground
137 in
Height - FOPS Cab*
150 in
Height - ROPS/Canopy*
158 in
Height - Top of Stack*
157 in
Ground Clearance*
23 in
Length - Basic Tractor - With Drawbar
204 in
Note (1)
*Includes grouser height for total dimensions on hard surfaces.
Note (2)
**Includes drawbar.
Drawbar Height (Center of Clevis)*
30 in
Length - Basic Tractor - With Winch
218 in
Length - With Multi-Shank Ripper
257 in
Length - With SU-Blade**
271 in
Length - With Single-Shank Ripper
257 in
Length - With U-Blade
274 in
Overall Length - Basic Tractor
193 in
Overall Length - SU-Blade/SS Ripper
324 in
Track Gauge
89 in
Width - Over Trunnions
130 in
Width - Without Trunnions - Standard Shoe
113 in
Length - Track on Ground
137 in

Engine - U.S. EPA Tier 4 Final/EU Stage IV

Engine Model (1)
Cat® C18
Net SAE J1349/ISO 9249
436 HP
Bore
6 in
Displacement
1,106 in³
Engine Model (2)
Cat C18 ACERT
Engine Power - Gross SAE J1995*
469 HP
Engine Power - ISO 14396
460 HP
Engine Power - Net Power SAE J1349/ISO 9249
436 HP
Note
*Excludes all fan losses.
Stroke
7 in

Weights

Operating Weight
106,618 lb
Shipping Weight
80,062 lb

Hydraulic Controls

Pump Type
Piston-type pump geared from flywheel
Pump Output - Steering
102 gal/min
Pump Output - Implement
60 gal/min
Tilt Cylinder Flow - Rod End Flow
37 gal/min
Tilt Cylinder Flow - Head End Flow
50 gal/min
Tilt Cylinder Relief Valve Setting
2,800 psi
Ripper - Lift - Relief Valve Setting
3,800 psi
Ripper - Pitch - Relief Valve Setting
3,800 psi
Tank Capacity
24 gal (US)
Lift Cylinder Relief Valve Setting
3,800 psi
Steering System - Pressure
5,875 psi

MOVE with MORE RESPONSIBILITY

Meeting regulations is very important for your business. The D9T is powered by the Cat C18 engine – which meet today's most stringent emissions standards and are poised to take on tomorrow's challenges as well. Power through tough materials with full rated net power of 436 horsepower at 1,800 rpm.

MOVE with MORE RELIABILITY

You can't afford to have operators not dozing. Helping you get more done with maximum availability, the D9T's durable design makes repair and maintenance easy. You can rebuild these dozers several times using the same frame with only minor repairs. It's not unusual for a Cat dozer to log more than 100,000 hours. The backbone of the dozer is a heavy, strong and durable frame with high-strength steel castings and continuously rolled top and bottom frame rails. The D9T frame provides durable support to the undercarriage, elevated final drives and other components.

Modular Design

Mechanical availability is one of your top concerns. The D9T reduces downtime by making our machines easy to repair and maintain. Major components are modular in design, so most can be removed and reinstalled without disturbing other systems – which allows the D9T back on the job faster.

MOVE with MORE CONFIDENCE

You consider the safety of your workers a top priority, and we're doing our best to help you meet your safety goals. Caterpillar considers the safety of everyone in, on or around Cat equipment when developing new products or enhancing safety features for existing products. The D9T has numerous safety features such as but not limited to:

  • Access / Egress Lighting
  • Visibility Arrangements
  • Push-arm Grab Handle, Steps and Guardrails
  • Anchorage Points
  • Operator Not Present Monitoring System

MOVE with MORE VERSATILITY

Every day you are focused on productivity and cost per unit for increased profitability. With the D9T fully suspended undercarriage you will get more cycles per day. Every additional cycle you get because of the smooth ride means increased production and lower cost per unit of material moved. The elevated sprocket and suspended undercarriage work together, increasing traction and giving the operator a smoother ride. The elevated sprocket design transfers implement shock loads to the mainframe, so final drives, axles and steering components are isolated from harsh impacts. These benefits translate into higher production and longer component life.

MOVE with MORE EFFICIENCY

Productive operations begin with a productive operator. Noise, stress and fatigue all have an effect on operator performance – so we've designed an environment that helps minimize them. Within the D9T the operator environment is more than a cab; it's an integrated electronic platform designed to maximize productivity. The new Information Display screen is larger, faster and more powerful with increased memory and intuitive menu structure.

MOVE with MORE INTELLIGENCE

You expect advanced solutions for improved uptime and performance. Several electronic features have been integrated into the D9T to help a less skilled operator become better and obtain the most out of the machine to help reduce operator fatigue and get more done at a lower cost per unit of material moved. The D9T has several electronic options including but not limited to:

  • Automated Blade Assist
  • Autocarry
  • Adaptive Load Select
  • Automatic Ripper Control
  • Cat Grade Control 3D

Cat MineStar System

Cat MineStar System is an integrated suite of mine operations and mobile equipment management technologies. Customers can configure the optional sets: Fleet, Terrain, Detect, Health and Command – to manage multiple operations and gather real-time feedback to enhance safety, productivity and efficiency.

MOVE with MORE SUPPORT

Your Cat dealer knows how to keep your machines moving. We've built an extensive network of nearly 200 locally owned businesses in over 200 countries. So wherever you operate, there is a dealer nearby to provide world-class service and support for your Cat equipment.

  • Electrical
    • Alternator, 150-amp
    • Back-up alarm
    • Batteries (two), 12-volt, 200 amp-hour
    • Converter, 12-volt, 10 amp and 20 amp
    • Diagnostic connector
    • Horn, forward warning
    • Light, engine compartment
    • Lighting system, six halogen and two LED
    • Starting receptacle
  • Operator Environment
    • Armrest, adjustable
    • Cab, FOPS
    • Cab heater
    • Deactivation switch, hydraulic controls
    • Decelerator pedal
    • Differential steer, power turn
    • Governor switch, electronic
    • Hydraulic system, electronically controlled for bulldozer and ripper control
    • Information display - multi-color
    • Mirror, rearview
    • MP3/IPOD ready
    • Radio ready, entertainment
    • ROPS mounted air conditioner
    • ROPS rollbar
    • Seat: - Cloth, air suspension
    • Seat belt, retractable 76 mm (3 in)
    • Steering and transmission control
    • Wipers, intermittent low and high speeds
  • Power Train
    • Aftercooler, air-to-air
    • Air filter, with precleaner
    • Aluminum bar plate radiator, 6 fpi
    • C18 Tier 4 Final and Stage IV: – 24-volt electric start – Clean Emissions Module
    • Coolant, extended life
    • Shift management: - Advanced Productivity Electronic Control System (APECS) - Enhanced AutoShift (EAS)
    • Engine idle shutdown timer
    • Ether starting aid, automatic
    • Fast fuel system
    • Fuel priming pump, key-on, electric
    • High speed oil change system, engine and power train
    • Muffler
    • Parking brake, electronic
    • Prescreener
    • Separator, water/fuel
    • Three planet, double-reduction planetary final drives
    • Torque converter
    • Transmission, electronic control (ECPC), (3F/3R speeds)
  • Safety And Security
    • Anchorage points
    • Fender guard rails
    • Heavy duty steps and handles
    • Operator Not Present Monitor System
    • Seat belt warning system
    • Slope and side-slope monitor
  • Undercarriage
    • Equalizer bar end pin grease fittings, remote
    • Rollers and idlers, lifetime lubricated
    • Sprocket rim segments, replaceable
    • Suspension-type undercarriage, eight-roller tubular track roller frame
    • Three bolt idler caps
    • Track adjusters, hydraulic
    • Track guides
    • Two-piece master links
  • Other Standard Equipment
    • Automated Blade Assist ready (for dual tilt)
    • CD ROM parts book
    • Ecology drains
    • Engine enclosure
    • Fluid sampling ports
    • Grade control ready
    • Ground level service center
    • Product Link (Satellite)
    • Vandalism protection (eight caplocks)
    • VIMS 3G
  • Bulldozer Attachments
    • 9SU blade
    • 9SU blade, push plate
    • 9SU abrasion resistant blade
    • 9SU abrasion resistant blade, black
    • 9SU landfill blade
    • 9U blade
    • 9U abrasion resistant blade
    • 9U abrasion resistant blade, black
  • Guards
    • Bottom guards, front counterweight
    • Bottom guards, partial
    • Bottom guards, sealed
    • Guard, fuel tank
    • Guard, fuel tank with transmission guard
    • Guard, undercarriage idlers
    • Guard, striker bars - front
  • Operator Environment
    • Cab glass: – 276 kPa (40 psi) – Dual pane impact resistant
    • Operators arrangements: – 5th percentile arrangement – Quick opening floor plates
    • Powered precleaner
    • Seat: – Vinyl with air suspension – Heated and ventilated cloth seat with air suspension
    • Visibility package: – Mirrors – Single camera
    • Window shades
  • Power Train
    • Coolant, arctic
    • Engine prelube
    • Exhaust, wrapped: – Insolated Clean Emissions Module
    • Final drives: – Cold weather – Guarded – Waste handling
    • Ground level DEF fill
    • Reversible cooling fan
  • Rear Attachments
    • CapSure hammerless installation and positive retention system – Single shank – Multi shank – Single shank deep
    • Counterweights
    • Drawbar, rear
    • Multi-shank ripper: – Standard
    • Single-shank ripper – Pin Puller – Standard
    • Striker bar
    • Winch*
    • *A rear attachment and/or counterweight is recommended for improved performance and balance.
  • Safety And Security
    • Lights – Twelve, (includes ten halogen and two LED) – HID (includes four halogen, six HID, and two LED) – LED, (includes twelve LED work lights)
    • Rear window screen
    • Warning strobe
  • Special Arrangements
    • High debris
    • Sound
    • Stockpile
    • Waste handling
  • Technology
    • AccuGrade installation
    • Performance – AutoCarry – Automatic ripper control
    • Cat Grade Control 3D
    • Terrain for Grading
  • Undercarriage
    • Carrier roller – Carrier rollers, cold weather
    • Tracks, PPR, sealed and lubricated – 560 mm (22 in), Extreme Service – 610 mm (24 in), Extreme Service – 610 mm (24 in), Extreme Service Trapezoidal Hole – 610 mm (24 in), Super Extreme Service – 610 mm (24 in), Super Extreme Service Trapezoidal Hole – 685 mm (27 in), Extreme Service – 685 mm (27 in), Extreme Service Clipped Grousers – 685 mm (27 in), Extreme Service Trapezoidal Hole – 685 mm (27 in), Super Extreme Service – 760 mm (30 in), Moderate Service – 760 mm (30 in), Moderate Service Trapezoidal Hole
    • Undercarriage arrangements – Abrasion – Cold weather – Waste handling
  • Other Attachments
    • Battery, cold weather (includes two sets of batteries and two starter motors)
    • Fuel lines, cooler
    • Heater, engine coolant
    • Hydraulics, dual tilt (with Auto Blade Assist)
×
Click Here for COVID-19 Updates