Swing System
- Boom Swing - Left
- 60 degrees
- Machine Swing Speed
- 11 r/min
- Boom Swing - Right
- 50 degrees
Engine
- Engine Model
- Cat C3.3B
- Net Power
- 70 HP
- Bore
- 4 in
- Displacement
- 203 in³
- Gross Power - ISO 14396
- 74 HP
- Rated Net Power - 2,200 rpm - EU Stage V - ISO 9249/EEC 80/1269
- 72 HP
- Rated Net Power - 2,200 rpm - U.S. EPA Tier 4 Final - ISO 9249/EEC 80/1269
- 70 HP
- Stroke
- 5 in
- Gross Power - SAE J1995
- 74 HP
- Rated Net Power - 2,200 rpm - U.S. EPA Tier 4 Final/EU Stage V - ISO 9249/EEC 80/1269
- 70 HP
Weights
- Operating Weight
- 20,077 lb
- Maximum Operating Weight with Cab**
- 20,077 lb
- Minimum Operating Weight with Cab*
- 18,610 lb
- Note (1)
- *Minimum Weight is based on rubber tracks, no counterweight, operator, full fuel tank, standard stick, blade and no bucket.
- Note (2)
- **Maximum Weight is based on steel tracks with rubber pads, counterweight, operator, full fuel tank, long stick, blade and no bucket.
Blade
- Height
- 17 in
- Width - Standard
- 91 in
- Width - Wide
- 97 in
Air Conditioning System
- Air Conditioning
- The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.0 kg of refrigerant which has a CO2 equivalent of 1.430 metric tonnes.
Certification - Cab
- Roll Over Protective Structure (ROPS)
- ISO 12117-2:2008
- Tip Over Protective Structure (TOPS)
- ISO 12117:1997
- Top Guard
- ISO 10262:1998 (Level I)
Dimensions - Long Stick
- Boom In Reach
- 127 in
- Boom Swing - Left
- 24 in
- Boom Swing - Right
- 37 in
- Cab Height
- 100 in
- Dig Depth
- 183 in
- Ground Clearance
- 14 in
- Maximum Blade Depth
- 16 in
- Maximum Blade Height
- 15 in
- Maximum Dig Height
- 277 in
- Maximum Dump Clearance
- 200 in
- Maximum Reach
- 301 in
- Maximum Reach - Ground Level
- 294 in
- O/A Shipping Length
- 262 in
- O/A Track Width
- 91 in
- O/A Undercarriage Length
- 113 in
- Stick Length
- 93 in
- Swing Bearing - Height
- 30 in
- Tail Swing with Counterweight
- 62 in
- Tail Swing without Counterweight
- 57 in
- Track Belt/Shoe Width
- 18 in
- Transport Height
- 99 in
- Vertical Wall
- 134 in
- Note
- *Boom Height when stick is pinned in transport position with no attachments.
- Note (2)
- ***With blade positioned at the rear of the machine.
- Note (1)
- **Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position.
- Height - Boom Transport - No Tools*
- 89 in
- Height - Boom Working - With Tools**
- 120 in
- Overall Shipping Length - without Counterweight
- 6872 mm (270.6 in)***
- Overall Shipping Length - with Counterweight
- 6872 mm (270.6 in)***
Dimensions - Standard Stick
- Boom In Reach
- 120 in
- Boom Swing - Left
- 24 in
- Boom Swing - Right
- 37 in
- Cab Height
- 100 in
- Dig Depth
- 162 in
- Ground Clearance
- 14 in
- Maximum Blade Depth
- 16 in
- Maximum Blade Height
- 15 in
- Maximum Dig Height
- 265 in
- Maximum Dump Clearance
- 187 in
- Maximum Reach
- 281 in
- Maximum Reach - Ground Level
- 274 in
- O/A Shipping Length
- 259 in
- O/A Track Width
- 91 in
- O/A Undercarriage Length
- 113 in
- Stick Length
- 72 in
- Swing Bearing - Height
- 30 in
- Tail Swing with Counterweight
- 62 in
- Tail Swing without Counterweight
- 57 in
- Track Belt/Shoe Width
- 18 in
- Transport Height
- 98 in
- Vertical Wall
- 118 in
- Note
- *Boom Height when stick is pinned in transport position with no attachments.
- Overall Shipping Length - with Counterweight
- 264 in
- Note (1)
- **Boom Height when stick is pinned in working position with attachments. Standard Stick offers only one pin position.
- Overall Shipping Length - without Counterweight
- 259 in
- Note (2)
- ***With blade positioned at the rear of the machine.
- Height - Boom Working - With Tools**
- 105 in
- Height - Boom Transport - No Tools*
- 96 in
Hydraulic System
- Auxiliary Circuit - Primary - Flow
- 35 gal/min
- Auxiliary Circuit - Primary - Pressure
- 4,134 psi
- Auxiliary Circuit - Secondary - Flow
- 9 gal/min
- Auxiliary Circuit - Secondary - Pressure
- 4,134 psi
- Digging Force - Bucket
- 13,946 lb
- Digging Force - Stick - Long
- 8,032 lb
- Digging Force - Stick - Standard
- 9,509 lb
- Operating Pressure - Equipment
- 4,134 psi
- Operating Pressure - Swing
- 3,626 psi
- Operating Pressure - Travel
- 4,134 psi
- Pump Flow at 2,400 rpm
- 44 gal/min
- Type
- Load Sensing Hydraulics with Variable Displacement Piston Pump
- Note
- Flow and pressure are not combinable. Under load, as flow rises pressure goes down.
- Maximum Auxiliary Circuit - Primary - Pressure at Pump
- 4,134 psi
- Maximum Auxiliary Circuit - Secondary - Pressure at Pump
- 4,134 psi
- Maximum Auxiliary Circuit - Primary - Flow at Pump
- 35 gal/min
- Maximum Auxiliary Circuit - Secondary - Flow at Pump
- 9 gal/min
Service Refill Capacities
- Cooling System
- 3 gal (US)
- Engine Oil
- 3 gal (US)
- Fuel Tank
- 39 gal (US)
- Hydraulic System
- 29 gal (US)
- Hydraulic Tank
- 14 gal (US)
Sound
- Average Exterior Sound Pressure (ISO 6395:2008)
- 99 dB(A)
- Note
- European Union Directive "2000/14/EC"
- Operator Sound Pressure (ISO 6396:2008)
- 72 dB(A)
Travel System
- Gradeability - Maximum
- 30 degrees
- Ground Pressure - Maximum Weight
- 6 psi
- Ground Pressure - Minimum Weight
- 5 psi
- Maximum Traction Force - High Speed
- 6,250 lb
- Maximum Traction Force - Low Speed
- 15,175 lb
- Travel Speed - High
- 3 mile/h
- Travel Speed - Low
- 2 mile/h
Weight Increase from Minimum Configuration
- Counterweight
- 552 lb
- Long Stick
- 146 lb
- Steel Tracks with Pads
- 752 lb
ALL DAY COMFORT
- A sealed and pressurized cab is equipped with an improved air conditioning system, adjustable wrist rests and a suspension seat to help keep you working comfortably all day long.
EASY TO OPERATE
- Controls are easy to use and the intuitive Next Generation Monitor provides customizable machine operator preferences and easy to read machine information.
STICK STEER TRAVEL MODE
- Moving around the job site is even easier with Cat Stick Steer. Easily switch from traditional travel controls with levers and pedals to joystick controls with a push of a button. The benefit of less effort and improved control is in your hands!
BIG PERFORMANCE IN A MINI DESIGN
- Increased lifting, swinging, travel and multi-functioning performance help you get the job done more efficiently, and blade float allows for easy clean up.
SAFETY ON THE JOB SITE
- Your safety is our top priority. The Cat Mini Excavator is designed to help keep you safe on the job. A back-up camera, courtesy work lights and a fluorescent retractable seat belt are just a few of the safety features we’ve built into the machine.
SIMPLE SERVICE FOR LESS DOWNTIME
- Maintenance is quick and easy on the Cat Mini Excavator. Routine check points are easy to access at ground level with grouped service points and robust service panels.
LOWER OPERATING COSTS
- Equipped with features such as auto idle, auto engine shutdown, and efficient hydraulics with a variable displacement pump, the Cat Mini Excavator was designed with reducing your operating costs in mind.
UNMATCHED DEALER SUPPORT
- Your Cat dealer is here to help you reach your business goals. From providing equipment solutions to operator training to service needs and beyond, your Cat dealer is ready to help.
-
Engine
- Cat C3.3B Diesel Engine (U.S. EPA Tier 4 Final/EU Stage V) – Electronic Engine, Turbo, Diesel Particulate Filter (DPF)
- Automatic Engine Idle
- Automatic Engine Shutdown
- Automatic Swing Brake
- Automatic Two Speed Travel
- Fuel Water Separator with Indicator
- Radial Seal – Double Element Air Filter
- Extended Life Coolant, –37° C (–35° F)
-
Hydraulics
- Electronic Variable Displacement Piston Pump
- Load Sensing/Flow Sharing Hydraulics
- Power On Demand
- Hydraulic Temperature Monitoring
- Certified Accumulator
- HYDO Advanced Hydraulic Oil
-
Operator Environment
- Top Guard ISO 10262 1998 Level I
- ROPS ISO 12117-2:2008
- Stick Steer Mode
- Travel Cruise Control
- Control Pattern Changer
- Adjustable Wrist Rests
- Molded Footrests
- Removable, Washable Floor Mat
- Travel Pedals and Hand Levers
- Cat Key with Passcode Option
- HVAC with Automatic Temperature Control
- Hydraulic Lockout Controls
- Integrated Lower Front Window
- Assisted Front Window Overhead Storage
- Rear Window Emergency Exit
- Fabric, High Back, Suspension Seat
- Retractable Seat Belt (75 mm/3 in)
- Coat Hook
- Cup Holder
- LED Interior Light
- Literature Holder
- Mounting Bosses for Top and Front Guards
- 12V Power Socket
- Radio – Bluetooth, Auxiliary, Microphone, USB (charging only)
- Skylight
- Signaling/Warning Horn
- Cab and (left side) Boom Work Lights
- Utility Space for Mobile Phone
- Next Generation Color LCD Monitor (IP66)
– Jog Dial Interface
– Fuel Level and Coolant Temperature Gauges
– Maintenance and Machine Monitoring
– Performance and Machine Adjustments
– Numeric Security Code
– Multiple Languages
– Camera Ready (IP68 & IP69K)
– Hour Meter with Wake Up Switch
-
Undercarriage
- Greased and Lubricated Track
- Tie Down Eyes on Track Frame
- Dozer Blade
- Dozer Float
- Bolt-on, Reversible Wear Edge
-
Boom, Stick And Linkages
- One Piece Boom (3400 mm/133.9 in)
- Standard Stick (1820 mm/71.7 in)
- Front Shovel Capable – Pin-on/Manual Coupler/Hydraulic Coupler (not available in all regions)
- Thumb Ready (not available in all regions)
-
Electrical
- 12 Volt Electrical System
- 60 Ampere Alternator
- Circuit Breaker
- 900 CCA Maintenance Free Battery
- Battery Disconnect
- Ignition Key Stop Switch
-
Other
- Locks on External Enclosure Doors
- Lockable Fuel Cap
- Beacon Socket
- Rear Reflectors
-
Operator Environment
- Push to Start with Bluetooth® Key
- Air Suspension Heated Seat
- Rain Visor
- Next Generation Advanced Monitor (below are all included with Next Generation Advanced Monitor option)
– Touch Screen
– Site Reference System
– High Definition Camera Capable (IP68 & IP69K)
– Numeric Security Code
-
Undercarriage
- Wide Dozer Blade
- Steel Tracks (450 mm/17.7 in wide)
- Wide Steel Tracks (600 mm/23.6 in)
- Steel Track with Rubber Pads
- Track Guides
-
Boom, Stick And Linkages
- Long Stick (2360 mm/92.9 in)
- Attachments including Buckets, Augers and Hammers
- 2nd Auxiliary Hydraulic Lines
- Boom Lowering Check Valve
- Stick Lowering Check Valve
- Certified Lifting Eye
-
Electrical
- Product Link™ Elite (regulations apply)
- Travel Alarm
- Rearview Camera
- Rotating Beacon
-
Guarding
- Mesh Front Guard ISO 10262 1998 Level I
- Heavy Duty Front Guard ISO 10262 1998 Level II
- Overhead Cab Guard ISO 10262 1998 Level II
- Polycarbonate Front Window EN356 P5A
- Track Guards
-
Other
- Additional Counterweight
- Water Jacket Heater
- Refueling Pump
- Variable Angle Boom (refer to 308 CR VAB brochure for VAB specs and additional information)