990K Wheel Loader Steel Mill Arrangement

  • Exterior View
  • Interior View

Engine

Net Power
699 hp
Engine Model
Cat® C27 ACERT™
Net Power – SAE J1349
699 hp
Bore
5 in
Stroke
6 in
Displacement
1,650 in3
Torque Rise
18 %
Rated Speed
1,800 rpm
Emissions
U.S. EPA Tier 4 Final/Tier 2 Equivalent
Rated Speed: Gross (ISO 14396)
752 hp
Rated Speed: Gross (SAE J1995)
766 hp
Rated Speed: Net Power – SAE J1349 (Standard Ambient)
699 hp
Rated Speed: Net Power – SAE J1349 (High Ambient)
648 hp
Gross - ISO 14396
752 HP
Peak Torque - 1,200 rpm
2,624 lb/ft
Net Power
699 HP
Engine Model
Cat® C27 ™
Bore
5 in
Stroke
6 in
Displacement
1,650 in³
Torque Rise
18 %
Emissions
Entspricht EPA Tier 4 Final/Tier 2 (USA)
Net Power - SAE J1349
699 HP
Rated Speed
1,800 r/min
Rated Speed - Gross - ISO 14396
752 HP
Rated Speed - Gross - SAE J1995
766 HP
Rated Speed - Net Power - SAE J1349 - High Ambient
648 HP
Rated Speed - Net Power - SAE J1349 - Standard Ambient
699 HP

Operating Specifications

Operating Weight
204,693 lb
Rated Payload
18 tons
Rated Payload - Standard
18 t
Bucket Capacity Range
8.6 m3-9.2 m3 (11.25 yd3-12.0 yd3)
Cat Truck Match - Standard
773-775
Operating Weight
204,693 lb
Rated Payload
18 t

Buckets

Bucket Capacities
8.6-9.2 m3 (11.2-12.0 yd3)
Bucket Capacities
8.6-9.2 m3 (11.2-12.0 yd3)

Transmission

Transmission Type
Cat planetary power shift
Forward 1
5 mph
Forward 2
8 mph
Forward 3
14 mph
Reverse 1
5 mph
Reverse 2
9 mph
Reverse 3
16 mph
Direct Drive Forward 2
9 mph
Direct Drive Reverse 1
5 mph
Direct Drive Reverse 2
10 mph
Direct Drive - Forward 1
Lock-up disabled
Direct Drive - Forward 3
15 mile/h
Direct Drive - Reverse 3
16 mile/h
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.
Transmission Type
Cat-Planetenlastschaltgetriebe
Forward - 1
5 mile/h
Forward - 2
8 mile/h
Forward - 3
14 mile/h
Reverse - 1
5 mile/h
Reverse - 2
9 mile/h
Reverse - 3
16 mile/h
Direct Drive - Forward 2
9 mile/h
Direct Drive - Reverse 1
5 mile/h
Direct Drive - Reverse 2
10 mile/h
Note
Travel speeds based on Michelin 45/65R39 LD D2**L5 tires.

Axles

Front
Fixed
Rear
Trunnion
Oscillation Angle
8.5°
Front
Fixed
Rear
Trunnion
Oscillation Angle
8.5°

Hydraulic System – Steering

Steering System – Circuit
Pilot, load sensing
Steering System – Pump
Piston, variable displacement
Maximum Flow @ 1,400 rpm
95 gal/min
Total Steering Angle
70°

Service Refill Capacities

Fuel Tank
294 gal
Cooling System
55 gal
Engine Crankcase
20 gal
Transmission
29 gal
Differentials and Final Drives – Front
72 gal
Differentials and Final Drives – Rear
69 gal
Hydraulic System Factory Fill
210 gal
Hydraulic Tank (Implement and Hydraulic Fan)
69 gal
Hydraulic System Factory Fill
210 gal (US)
Fuel Tank
294 gal (US)
Cooling System
55 gal (US)
Transmission
29 gal (US)
Differential - Final Drives - Front
72 gal (US)
Differential - Final Drives - Rear
69 gal (US)
Engine Crankcase
20 gal (US)
Hydraulic Tank - Implement and Hydraulic Fan
69 gal (US)
Hydraulic Tank - Steering and Braking
35 gal (US)

Sound Performance – Standard

Operator Sound Level (ISO 6396:2008)
69 dB(A)
Machine Sound Level (ISO 6395:2008)
115 dB(A)

Hydraulic System – Lift/Tilt

Cylinders, Double Acting: Lift, Bore and Stroke
254 mm × 1264 mm (10.0 in × 49.8 in)
Cylinders, Double Acting: Tilt, Bore and Stroke
317.5 mm × 819 mm (12.5 in × 32.2 in)
Maximum Flow at 1,800 rpm
22 gal/min
Maximum Flow at 1,800 rpm
216 gal/min
Pilot System
Open loop and pressure reducing
Relief Valve Setting
507 psi

Hydraulic Cycle Time

Rack Back
5 Seconds
Raise
9 Seconds
Dump
3 Seconds
Lower
4 Seconds
Lower Float Down
4 Seconds
Total Hydraulic Cycle Time (empty bucket)
16 Seconds

Sound Performance – Suppression

Operator Sound Level (ISO 6396:2008)
69 dB(A)
Machine Sound Level (ISO 6395:2008)
113 dB(A)

Brakes

Brakes
SAE J1473 OCT90, ISO 3450:1992
Brakes
SAE J1473 OKT90, ISO 3450:1992

Hydraulic System - Steering

Relief Valve Setting - Steering
4,641 psi
Maximum Flow at 1,400 rpm
95 gal/min
Steering System - Circuit
Pilot, load sensing
Steering System - Pump
Piston, variable displacement
Total Steering Angle
70°

Hydraulic System - Lift/Tilt

Lift/Tilt System
Variable displacement piston
Relief Valve Setting - Main
507 psi
Cylinders, Double Acting - Lift, Bore and Stroke
254 mm × 1264 mm (10.0 in × 49.8 in)
Cylinders, Double Acting - Tilt, Bore and Stroke
317.5 mm × 819 mm (12.5 in × 32.2 in)
Lift/Tilt System - Circuit
Positive flow control
Maximum Flow at 1,800 rpm (1)
22 gal/min
Maximum Flow at 1,800 rpm (2)
216 gal/min
Pilot System
Open loop and pressure reducing
Relief Valve Setting - Lift/Tilt
4,786 psi

Dimensions – Standard Lift (Approximate)

Ground to Top of ROPS
17 ft
Ground to Top of Exhaust Stacks
17 ft
Ground to Top of Hood
13 ft
Ground to Bumper Clearance
4 ft
Rear Axle Centerline to Bumper
13 ft
Front Axle Centerline to Bucket Tip
14 ft
Wheelbase
15 ft
Maximum Overall Length
42 ft
Ground to Lower Hitch Clearance
2 ft
Clearance at Maximum Lift
13 ft
Rack Back Angle at Ground Level
40.4 degrees
Rack Back Angle at Carry
48.8 degrees
B-Pin Height at Maximum Lift
19 ft
Maximum Overall Height, Bucket Raised
27 ft
Rack Angle at Maximum Lift
63.7 degrees
Dump Angle at Maximum Lift
47.4 degrees
Reach at Maximum Lift
7 ft

Dimensions - Standard Lift - Approximate

Ground to Center of Front Axle
4 ft
B-Pin Height - Maximum Lift
19 ft
Clearance at Maximum Lift
13 ft
Dump Angle at Maximum Lift
47.4 degrees
Front Axle Centerline to Bucket Tip
14 ft
Ground to Bumper Clearance
4 ft
Ground to Lower Hitch Clearance
2 ft
Ground to Top of Exhaust Stacks
17 ft
Ground to Top of Hood
13 ft
Ground to Top of ROPS
17 ft
Maximum Overall Height - Bucket Raised
27 ft
Maximum Overall Length
42 ft
Rack Angle at Maximum Lift
63.7 degrees
Rack Back Angle - Carry
48.8 degrees
Rack Back Angle - Ground Level
40.4 degrees
Reach - Maximum Lift
7 ft
Rear Axle - Centerline to Bumper
13 ft
Wheel Base
15 ft

Hydraulic Cycle Times

Raise
9 s
Dump
3 s
Lower
4 s
Lower Float Down
4 s
Rack Back
5 s
Total Hydraulic Cycle Time - Empty Bucket
16 s

Sound Performance - Standard

Machine Sound Level (ISO 6395:2008)
115 dB(A)
Operator Sound Level (ISO 6396:2008)
69 dB(A)

Sound Performance - Suppression

Machine Sound Level (ISO 6395:2008)
113 dB(A)
Operator Sound Level (ISO 6396:2008)
69 dB(A)

POWERFUL EFFICIENCY

LONG TERM VALUE AND DURABILITY

PROVEN RELIABILITY

PERFORMANCE AND PRODUCTIVITY

OPERATOR COMFORT AND CONTROL

PRODUCTIVITY WITH TECHNOLOGY

SAVE ON SERVICE AND MAINTENANCE

TOP-TIER SERVICE AND SUPPORT

SAFETY FIRST

HANDLE THE HEAT

ATTACHMENTS TO MEET YOUR NEEDS

PERFORMANCE WITH LESS FUEL

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Air conditioner and heater with automatic temperature control
    • Cab, sound-suppressed pressurized, protective structure (ROPS/FOPS), radio ready for (entertainment) includes antenna, speakers and converter (12V, 10-15 amp)
    • 12V power port for mobile phone or laptop connection
    • Camera, rear vision
    • Cigar lighter and ashtray
    • Coat hook
    • Electro-hydraulic tilt and lift controls (seat mounted)
    • Flip-up armrest
    • Heater and defroster
    • Horn, electric
    • Implement hydraulic lockout
    • Instrumentation, gauges: – Engine coolant temperature – Fuel level – Ground speed – Gear – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, warning indicators: – Action alert system, three category – Automatic transmission model enable status – Brake malfunction – Bucket float status – Delayed engine shutdown status – Engine idle shutdown status – Engine malfunction – Fuel economy mode enable status – Hydraulic lockout – Lock-up clutch enable status – Low fuel level – Parking brake status – Rimpull control enable status – Seatbelt warning – Secondary steering (if equipped) – Throttle lock status – Transmission gear
    • Keypad, control with indicator lights: – Auto trans mode speed range – Auto/manual transmission mode – Fuel economy mode – Implement kickout – Lock-up clutch – Reduced rimpull – Throttle lock
    • Light, dome (cab)
    • Lunchbox and beverage holders
    • Mirrors, rearview (externally mounted)
    • Seat, Cat comfort (cloth) air suspension
    • Seat belt, retractable, 76 mm (3 in) wide
    • STIC control system with steering lock
    • Tinted glass
    • Trainer seat with lap belt
    • Vital Information Management System (VIMS) 3G with graphical information display: external data port, customizable operator profiles, cycle timer, and integral Payload Control System (PCS): – Wet-arm wipers/washers (front, rear and corner) intermittent front wiper
  • Power Train
    • Brakes, full hydraulic, enclosed, oil-disc
    • Axle-shaft oil-disc service brake
    • Electro hydraulic parking brake
    • Case drain filters
    • Cat clean emission module (Tier 4 Final only)
    • Demand fan
    • Engine Cat C27
    • Fuel priming pump (electric)
    • Ground level engine shutoff, bumper
    • Mufflers (under hood) (Tier 2 only)
    • Precleaner, engine air intake
    • Radiator, Aluminum Modular (AMR)
    • Separated cooling system
    • Starting aid, (ether) manual override
    • Throttle Lock
    • Torque Converter, Impeller Clutch with lock-up clutch feature and rimpull control system
    • Transmission, 534 mm (21 in) planetary power shift (electronic) (3F/3R)
  • Electrical
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance free (2 – 1,400 CCA)
    • Converter, 10/15 amp, 24V to 12V
    • Deutsch component connectors
    • Electrical system, 24V
    • Electronic transmission control
    • Lighting system, halogen (front and rear) lighting, access stairway, engine compartment
    • Starter, electric
    • Starter lockout in bumper
    • Starting receptacle for emergency start
    • Transmission lockout in bumper
  • Other
    • Automatic bucket tilt/lift kickouts electronically adjustable from cab
    • Axle temperature sensor
    • Battery disconnect and jump start receptacle, bumper
    • Coupling, Caterpillar O-ring face seals
    • Economy mode with on demand throttle
    • Emergency platform egress
    • Engine, crankcase, 500 hour interval with CH4
    • Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
    • Fenders, steel (front)
    • Guards, crankcase and power train
    • Grouped/labeled lube points
    • Hitch, drawbar with pin
    • Hoses, Cat XT
    • Oil sampling valves
    • Positive flow control hydraulic system
    • Product Link
    • Sight Gauges: hydraulic tanks, steering/fan and implement/brake, and transmission
    • Stairway, left and right rear access
    • Steering, load sensing
    • Toe kicks
    • Vandalism protection caplocks
    • Venturi stack
    • Premixed 50% concentration of extended life coolant with freeze protection to –34° C (–29° F)
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • –50° C (–58° F) antifreeze
    • Engine oil change system, high speed, Wiggins
    • Engine block heater 120V or 240V
    • High ambient cooling – software
  • Operator Environment
    • Cab precleaner
    • AM/FM/CD/MP3 radio
    • Satellite Sirius radio with Bluetooth
    • LED warning strobe
    • CB radio ready
    • Window sun shade
  • Miscellaneous Attachments
    • Front and rear roading fenders
    • Fast fill fuel system (Shaw-Aero)
    • Axle oscillation stop
    • Heavy duty cab mounts
×