150 Motor Grader

Overview
Engine Model
Cat® C9.3 ACERT™
Gross Vehicle Weight - Maximum - Front Axle
17,075 lb
Gross Vehicle Weight - Maximum - Rear Axle
38,069 lb
  • Exterior View
  • Interior View

Engine

Engine Model
Cat® C9.3 ACERT™
Bore
5 in
Stroke
6 in
Emissions
U.S. EPA Tier 4 Final/EU Stage IV
High Ambient - Fan Speed - Standard
1,400 rpm
Maximum Torque (VHP Plus)
920 lb ft
Standard Capability
109 ° F
Torque Rise
39%
VHP Plus Range - Net
149-188 kW (200-252 hp)
VHP Plus Range - Net (Metric)
149-188 kW (202-255 hp)
VHP Plus: Gear - Net Power - Forward - 1st
200 hp
VHP Plus: Gear - Net Power - Forward - 2nd
210 hp
VHP Plus: Gear - Net Power - Forward - 3rd
220 hp
VHP Plus: Gear - Net Power - Forward - 4th
231 hp
VHP Plus: Gear - Net Power - Forward - 5th
236 hp
VHP Plus: Gear - Net Power - Forward - 6th
241 hp
VHP Plus: Gear - Net Power - Forward - 7th
247 hp
Displacement
568 in3
Number of Cylinders
6
Derating Altitude
10,000 ft
High Ambient - Fan Speed - Maximum
1,550 rpm
High Ambient - Fan Speed - Minimum
500 rpm
High Ambient Capability
122 ° F
Base Power (1st Gear) - Net
200 HP
Speed at Rated Power
2,000 rpm
Base Power (1st Gear) - Net - Metric
202 HP
VHP Plus - Gear - Net Power - Forward 8th
252 HP
VHP Plus - Gear - Net Power - Reverse 1st
200 HP
VHP Plus - Gear - Net Power - Reverse 2nd
210 HP
VHP Plus - Gear - Net Power - Reverse 3rd-6th
220 HP
Engine Model
Cat® C9.3
Bore
5 in
Stroke
6 in
Emissions
U.S. EPA Tier 4 Final/EU Stage V
High Ambient - Fan Speed - Standard
1,400 rpm
Maximum Torque - VHP Plus
920 lb/ft
Standard Capability
109 °F
Torque Rise
39%
VHP Plus - Gear - Net Power - Forward 1st
200 HP
VHP Plus - Gear - Net Power - Forward 2nd
210 HP
VHP Plus - Gear - Net Power - Forward 3rd
220 HP
VHP Plus - Gear - Net Power - Forward 4th
231 HP
VHP Plus - Gear - Net Power - Forward 5th
236 HP
VHP Plus - Gear - Net Power - Forward 6th
241 HP
VHP Plus - Gear - Net Power - Forward 7th
247 HP
VHP Plus Range - Net
149-188 kW (200-252 hp)
VHP Plus Range - Net - Metric
149-188 kW (202-255 hp)
Displacement
568 in³
Number of Cylinders
6
Derating Altitude
10,000 ft
High Ambient - Fan Speed - Maximum
1,550 rpm
High Ambient - Fan Speed - Minimum
500 rpm
High - Ambient Capability
122 °F
Base Power (1st Gear) - Net
200 HP
Engine Model
Cat® C9.3
Bore
5 in
Stroke
6 in
Speed at Rated Power
2,000 rpm
VHP Plus - Gear - Net Power - Reverse 1st
200 HP
VHP Plus - Gear - Net Power - Forward 1st
200 HP
Maximum Torque - VHP Plus
920 lb/ft
VHP Plus - Gear - Net Power - Forward 8th
252 HP
VHP Plus - Gear - Net Power - Forward 6th
241 HP
VHP Plus - Gear - Net Power - Forward 2nd
210 HP
Emissions
U.S. EPA Tier 4 Final/EU Stage V
VHP Plus - Gear - Net Power - Forward 7th
247 HP
High Ambient - Fan Speed - Standard
1,400 rpm
VHP Plus - Gear - Net Power - Forward 5th
236 HP
VHP Plus Range - Net - Metric
149-188 kW (202-255 hp)
Standard Capability
109 °F
VHP Plus - Gear - Net Power - Reverse 3rd-6th
220 HP
VHP Plus - Gear - Net Power - Forward 4th
231 HP
Base Power (1st Gear) - Net - Metric
202 HP
VHP Plus Range - Net
149-188 kW (200-252 hp)
VHP Plus - Gear - Net Power - Reverse 2nd
210 HP
VHP Plus - Gear - Net Power - Forward 3rd
220 HP
Torque Rise
39%
Displacement
568 in³
Number of Cylinders
6
Derating Altitude
10,000 ft
High Ambient - Fan Speed - Maximum
1,550 rpm
High Ambient - Fan Speed - Minimum
500 rpm
High - Ambient Capability
122 °F

Weights

Gross Vehicle Weight - Maximum - Front Axle
17,075 lb
Gross Vehicle Weight - Maximum - Rear Axle
38,069 lb
Operating Weight, Typically Equipped - Front Axle
12,549 lb
Operating Weight, Typically Equipped - Rear Axle
31,401 lb
Gross Vehicle Weight - Base - Front Axle
9,601 lb
Gross Vehicle Weight - Base - Rear Axle
28,590 lb
Gross Vehicle Weight - Maximum - Total
55,144 lb
Gross Vehicle Weight - Base - Total
38,191 lb
Operating Weight, Typically Equipped - Total
43,950 lb
Operating Weight - Typically Equipped
43,950 lb
Gross Vehicle Weight - Maximum - Front Axle
17,075 lb
Gross Vehicle Weight - Maximum - Rear Axle
38,069 lb
Operating Weight - Typically Equipped - Front Axle
12,549 lb
Operating Weight - Typically Equipped - Rear Axle
31,401 lb
Gross Vehicle Weight - Base - Front Axle
9,601 lb
Gross Vehicle Weight - Base - Rear Axle
28,590 lb
Gross Vehicle Weight - Maximum - Total
55,144 lb
Gross Vehicle Weight - Base - Total
38,191 lb
Operating Weight - Typically Equipped - Total
43,950 lb
Operating Weight - Typically Equipped
43,950 lb
Gross Vehicle Weight - Maximum - Front Axle
17,075 lb
Gross Vehicle Weight - Maximum - Rear Axle
38,069 lb
Operating Weight - Typically Equipped - Front Axle
12,549 lb
Operating Weight - Typically Equipped - Rear Axle
31,401 lb
Gross Vehicle Weight - Base - Front Axle
9,601 lb
Gross Vehicle Weight - Base - Rear Axle
28,590 lb
Gross Vehicle Weight - Maximum - Total
55,144 lb
Gross Vehicle Weight - Base - Total
38,191 lb
Operating Weight - Typically Equipped - Total
43,950 lb

Power Train

Brakes - Service, Surface Area
3,565 in2
Forward/Reverse Gears
8 Forward/6 Reverse
Transmission
APECS, Direct Drive, Powershift
Brakes - Service
Multiple Oil Disc
Brakes - Parking
Multiple Oil Disc
Brakes - Secondary
Dual Circuit
Brakes - Service - Surface Area
3,565 in²
Forward/Reverse Gears
8 Forward/6 Reverse
Transmission
APECS, Direct Drive, Powershift
Brakes - Service
Multiple Oil Disc
Brakes - Service - Surface Area
3,565 in²
Brakes - Parking
Multiple Oil Disc
Brakes - Secondary
Dual Circuit

Hydraulic System

Pump Output
56 gal/min
Standby Pressure
885 psi
Circuit Type
Parallel
Pump Type
Variable Piston
Maximum System Pressure
3,500 psi
Standby Pressure
885 psi
Pump Output
56 gal/min
Reservoir Tank Capacity
17 gal (US)
Circuit Type
Parallel
Pump Type
Variable Piston
Pump Output
56 gal/min
Maximum System Pressure
3,500 psi
Reservoir Tank Capacity
17 gal (US)
Standby Pressure
885 psi

Moldboard

Moldboard - Height
24 in
Moldboard - Thickness
1 in
Blade Pull - Base GVW
25,732 lb
Blade Pull - Maximum GVW
34,262 lb
Blade Down Pressure - Base GVW
16,480 lb
Blade Down Pressure - Maximum GVW
29,308 lb
Moldboard - Blade Width
12 ft
Blade Width
12 ft
Arc Radius
16 in
Throat Clearance
7 in
Cutting Edge Width
6 in
Cutting Edge Thickness
1 in
End Bit - Width
6 in
End Bit - Thickness
1 in
Moldboard - Height
24 in
Moldboard - Thickness
1 in
Blade Pull - Base GVW
25,732 lb
Blade Pull - Maximum GVW
34,262 lb
Blade Down Pressure - Base GVW
16,480 lb
Blade Down Pressure - Maximum GVW
29,308 lb
Moldboard - Blade Width
12 ft
Blade Width
12 ft
Moldboard - Height
24 in
Moldboard - Thickness
1 in
Arc Radius
16 in
Throat Clearance
7 in
Cutting Edge Width
6 in
Cutting Edge Thickness
1 in
End Bit - Width
6 in
End Bit - Thickness
1 in
Blade Pull - Base GVW
25,732 lb
Blade Pull - Maximum GVW
34,262 lb
Blade Down Pressure - Base GVW
16,480 lb
Blade Down Pressure - Maximum GVW
29,308 lb
Moldboard - Blade Width
12 ft

Service Refill

Diesel Exhaust Fluid
6 gal
Fuel Capacity
104 gal (US)
Cooling System
15 gal (US)
Hydraulic System - Total
26 gal (US)
Hydraulic System - Tank
17 gal (US)
Transmission - Differential - Final Drives
19 gal (US)
Engine Oil
8 gal (US)
Tandem Housing - Each
20 gal (US)
Front Wheel Spindle Bearing Housing
0 gal (US)
Circle Drive Housing
2 gal (US)
Diesel Exhaust Fluid
6 gal (US)
Fuel Capacity
104 gal (US)
Cooling System
15 gal (US)
Hydraulic System - Total
26 gal (US)
Hydraulic System - Tank
17 gal (US)
Transmission - Differential - Final Drives
19 gal (US)
Diesel Exhaust Fluid
6 gal (US)
Engine Oil
8 gal (US)
Tandem Housing - Each
20 gal (US)
Front Wheel Spindle Bearing Housing
0 gal (US)
Circle Drive Housing
2 gal (US)

Frame

Circle - Height
5 in
Drawbar - Thickness
1 in
Front-Top/Bottom Plate - Width
12 in
Front-Top/Bottom Plate - Thickness
1 in
Front Axle - Wheel Lean, Left/Right
18°
Drawbar - Width
3 in
Circle - Diameter
60 in
Circle - Blade Beam Thickness
2 in
Drawbar - Height
6 in
Front Frame Structure - Height
13 in
Front Frame Structure - Width
12 in
Front Axle - Height to Center
24 in
Front Axle - Total Oscillation per Side
32°
Circle - Height
5 in
Drawbar - Thickness
1 in
Front-Top/Bottom Plate - Width
12 in
Front-Top/Bottom Plate - Thickness
1 in
Front Axle - Wheel Lean - Left/Right
18°
Drawbar - Width
3 in
Circle - Diameter
60 in
Circle - Blade Beam Thickness
2 in
Drawbar - Height
6 in
Front Frame Structure - Width
12 in
Front Frame Structure - Height
13 in
Circle - Height
5 in
Drawbar - Thickness
1 in
Front-Top/Bottom Plate - Width
12 in
Front-Top/Bottom Plate - Thickness
1 in
Front Axle - Height to Center
24 in
Front Axle - Wheel Lean - Left/Right
18°
Front Axle - Total Oscillation per Side
32°

Scarifier

Mid, V-Type - Scarifier Shank Holder Spacing
5 in
Mid, V-Type - Scarifying Depth, Maximum
12 in
Mid, V-Type - Working Width
47 in
Rear - Scarifying Depth, Maximum
17 in
Rear - Working Width
84 in
Rear - Scarifier Shank Holder Spacing
11 in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing
5 in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders
5/11
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum
18 in
Front, V-Type, 5 or 11 Tooth - Working Width
41 in
Front, V-Type - Working Width
47 in
Mid, V-Type - Scarifier Shank Holders
11
Rear - Scarifier Shank Holders
9
Mid, V-Type - Scarifier Shank Holder Spacing
5 in
Mid, V-Type - Scarifying Depth, Maximum
12 in
Mid, V-Type - Working Width
47 in
Rear - Scarifying Depth, Maximum
17 in
Rear - Working Width
84 in
Rear - Scarifier Shank Holder Spacing
11 in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holders
5/11
Front, V-Type, 5 or 11 Tooth - Scarifying Depth, Maximum
18 in
Rear - Scarifying Depth, Maximum
17 in
Mid, V-Type - Working Width
47 in
Front, V-Type - Working Width
47 in
Front, V-Type, 5 or 11 Tooth - Working Width
41 in
Mid, V-Type - Scarifying Depth, Maximum
12 in
Mid, V-Type - Scarifier Shank Holders
11
Mid, V-Type - Scarifier Shank Holder Spacing
5 in
Front, V-Type, 5 or 11 Tooth - Scarifier Shank Holder Spacing
5 in
Rear - Working Width
84 in
Rear - Scarifier Shank Holders
9
Rear - Scarifier Shank Holder Spacing
11 in

Ripper

Ripper Shank Holder Spacing
21 in
Ripping Depth - Maximum
17 in
Ripper Shank Holders
5
Penetration Force
20,812 lb
Pry-Out Force
27,794 lb
Machine Length Increase, Beam Raised
41 in
Ripper Shank Holder Spacing
21 in
Ripper Shank Holder Spacing
21 in
Ripping Depth - Maximum
17 in
Ripper Shank Holders
5
Penetration Force
20,812 lb
Pry-Out Force
27,794 lb
Machine Length Increase, Beam Raised
41 in

Dimensions

Height - Top of Cab
130 in
Length - Counterweight to Ripper
399 in
Width - Outside Front Tires
99 in
Length - Front Axle to Mid Tandem
241 in
Length - Front Tire to Rear of Machine
351 in
Length - Front Axle to Moldboard
100 in
Length - Between Tandem Axles
60 in
Width - Outside Rear Tires
99 in
Width - Tire Center Lines
84 in
Height - Front Axle Center
24 in
Height to Exhaust Stack
128 in
Height to Top of Cylinders
120 in
Ground Clearance at Rear Axle
13 in
Height - Top of Cab
130 in
Length - Counterweight to Ripper
399 in
Width - Outside Front Tires
99 in
Length - Front Axle to Mid Tandem
241 in
Length - Front Tire to Rear of Machine
351 in
Length - Front Axle to Moldboard
100 in
Length - Between Tandem Axles
60 in
Width - Outside Rear Tires
99 in
Width - Tire Center Lines
84 in
Height - Front Axle Center
24 in
Height - Exhaust Stack
128 in
Height - Top of Cylinders
120 in
Ground Clearance - Rear Axle
13 in
Height - Top of Cab
130 in
Length - Counterweight to Ripper
399 in
Width - Outside Front Tires
99 in
Length - Front Axle to Mid Tandem
241 in
Length - Front Tire to Rear of Machine
351 in
Length - Front Axle to Moldboard
100 in
Length - Between Tandem Axles
60 in
Width - Outside Rear Tires
99 in
Width - Tire Center Lines
84 in
Height - Front Axle Center
24 in
Height - Exhaust Stack
128 in
Height - Top of Cylinders
120 in
Ground Clearance - Rear Axle
13 in

Operating Specifications

Top Speed - Forward
29 mile/h
Top Speed - Reverse
23 mile/h
Turning Radius - Outside Front Tires
26 ft
Steering Range - Left/Right
50°
Articulation Angle - Left/Right
20°
Forward - 1st
3 mile/h
Forward - 2nd
3 mile/h
Forward - 3rd
5 mile/h
Forward - 4th
7 mile/h
Forward - 5th
11 mile/h
Forward - 6th
15 mile/h
Forward - 7th
20 mile/h
Forward - 8th
29 mile/h
Reverse - 1st
2 mile/h
Reverse - 2nd
4 mile/h
Reverse - 3rd
5 mile/h
Reverse - 4th
8 mile/h
Reverse - 5th
16 mile/h
Reverse - 6th
23 mile/h
Top Speed - Forward
29 mile/h
Top Speed - Reverse
23 mile/h
Turning Radius - Outside Front Tires
26 ft
Steering Range - Left/Right
50°
Articulation Angle - Left/Right
20°
Forward - 1st
3 mile/h
Forward - 2nd
3 mile/h
Forward - 3rd
5 mile/h
Forward - 4th
7 mile/h
Forward - 5th
11 mile/h
Forward - 6th
15 mile/h
Forward - 7th
20 mile/h
Forward - 8th
29 mile/h
Reverse - 1st
2 mile/h
Reverse - 2nd
4 mile/h
Reverse - 3rd
5 mile/h
Reverse - 4th
8 mile/h
Reverse - 5th
16 mile/h
Reverse - 6th
23 mile/h

Blade Range

Circle Centershift - Right
29 in
Circle Centershift - Left
27 in
Moldboard Sideshift - Right
26 in
Moldboard Sideshift - Left
20 in
Maximum Blade Position Angle
90°
Blade Tip Range - Forward
40°
Blade Tip Range - Backward
Maximum Shoulder Reach Outside of Tires - Right
78 in
Maximum Shoulder Reach Outside of Tires - Left
71 in
Maximum Lift Above Ground
19 in
Maximum Depth of Cut
28 in
Circle Centershift - Right
29 in
Circle Centershift - Left
27 in
Moldboard Sideshift - Right
26 in
Moldboard Sideshift - Left
20 in
Maximum Blade Position Angle
90°
Blade Tip Range - Forward
40°
Blade Tip Range - Backward
Maximum Shoulder Reach Outside of Tires - Right
78 in
Maximum Shoulder Reach Outside of Tires - Left
71 in
Maximum Lift Above Ground
19 in
Maximum Depth of Cut
28 in

Standards

Brakes
ISO 3450
ROPS/FOPS
ISO 3471/ISO 3499
Sound
ISO 6394; ISO 6395
Steering
ISO 5010
Steering
ISO 5010
ROPS/FOPS
ISO 3471/ISO 3449
Brakes
ISO 3450
Sound
ISO 6394; ISO 6395

Tandems

Height
20 in
Width
8 in
Sidewall Thickness - Inner
1 in
Sidewall Thickness - Outer
1 in
Drive Chain Pitch
2 in
Wheel Axle Spacing
60 in
Tandem Oscillation - Front Up
15°
Tandem Oscillation - Front Down
25°
Height
20 in
Width
8 in
Sidewall Thickness - Inner
1 in
Sidewall Thickness - Outer
1 in
Drive Chain Pitch
2 in
Wheel Axle Spacing
60 in
Tandem Oscillation - Front Up
15°
Tandem Oscillation - Front Down
25°

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.
Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

DESIGNED FOR OPERATORS

  • Good visibility is key to safety and efficiency. Angled cab doors, tapered engine enclosure and a sloped rear window make it easy to see the moldboard and tires, as well as behind the machine. Optional rear vision camera further enhances lines of sight all around the machine.
  • Experience the most spacious, comfortable cab in the industry.
  • Easy-to-learn joystick controls replace levers, so hand and arm movement is reduced by 78%, helping reduce operator fatigue for better productivity.
  • Left joystick controls steering, articulation, return-to-center, wheel lean, gear selection, left moldboard lift cylinder and float.
  • Right joystick controls drawbar, circle and moldboard functions as well as electronic throttle control and manual differential lock/unlock.
  • Joystick lean angle mirrors the steer tires' turning angle.
  • A brake tensioning system holds the joystick in position until the operator moves it.
  • Steering control automatically reduces sensitivity at higher ground speeds for predictable control.
  • Infinitely variable roller switches control the rear ripper and/or front lift group (when equipped).
  • Control switches are in easy reach.
  • Updated seat offers softer cushions, three-position tilt and optional heated and heated/cooled cushions.
  • Control pods are electronically positioned allowing each operator to set the ideal operating position.
  • Multiple isolation mounts reduce sound and vibration for a more relaxed work environment.
  • High capacity Heating, Ventilation and Air Conditioning (HVAC) system dehumidifies and pressurizes the cab, circulates fresh air, seals out dust and keeps windows clear.
  • An optional deluxe radio with CD features MP3 and Bluetooth® technology.
  • New Message Display shows machine performance and diagnostic information. Located in center console, it also displays Grade Control Cross Slope readings.
  • Electronic Throttle Control helps improve productivity by providing the best match of horsepower and torque for the demands of the application.
  • Articulation Return-to-Center automatically returns the machine to a straight frame position from any angle with the touch of a button.
  • Select Fine, Normal or Coarse blade lift modulation to best fit application or operator preference.

PERFORMANCE AND PRODUCTIVITY

  • Cat C9.3 engine delivers the performance needed to maintain consistent grading speeds for maximum productivity.
  • Latest engine technology optimize productivity, fuel efficiency, reliability, life and minimize emissions.
  • Hydraulic demand fan automatically adjusts speed according to engine cooling requirements. When cooling demand is reduced, you benefit from more power to the ground and improved fuel efficiency.
  • Engine Idle Shutdown Timer is software-enabled by your Cat dealer to shut down the engine after a set period of time to save you fuel and help reduce emissions.
  • Optional Reversing Fan, clears debris on-the-go.
  • TheMotor Graders give you efficiency and longevity in your most demanding applications.
  • Standard Automatic Differential Lock/Unlock unlocks the differential during a turn and re-locks when straight for easier operation and to help protect the power train.
  • Full Electronic Clutch Pressure Control system optimizes inching modulation for smooth shifts and directional changes, reducing stress on gears.
  • Programmable AutoShift option simplifies operation by allowing the operator to program the transmission to shift at optimal points to match your application.
  • Eco Mode can be engaged for up to 10% fuel savings depending upon application.
  • Power Shift Countershaft Transmission is matched to the Cat engine to maximize power to the ground.
  • Wide operating gear range for maximum productivity.
  • Engine Over-Speed Protection prevents downshifting until an acceptable safe travel speed has been established.
  • Sealed spindle keeps front axle bearings lubricated and protected from contaminants. The Cat “Live Spindle” design places the larger tapered roller bearing on the outside, where the load is greater, extending bearing life.
  • Bolt-on modular rear axle improves serviceability and contamination control with easy access to differential components.
  • Oil-bath, multi-disc service brakes are hydraulically actuated for smooth, predictable braking and lower operating costs. Brakes are located at each tandem wheel and have a large total brake surface area to give you dependable stopping power and longer life.
  • Emissions technology is transparent with no action required from the operator or need to stop. Regeneration runs automatically at cold start-up and, if needed, in the background while you work.
  • Reaching Tier 4 Final standards only required one additional system to the proven Cat emission strategy - Selective Catalytic Reduction (SCR).
  • SCR utilizes Diesel Exhaust Fluid (DEF), conveniently filled from ground level when re-fueling.
  • A gauge on the dash shows your fluid level.
  • At shutdown, a pump automatically purges the DEF lines.
  • If the engine/aftertreatment temperatures are high, a Delayed Engine Shutdown will activate automatically to cool the machine and then purge the lines.

BUILT FOR LONG TERM PRODUCTION

  • Caterpillar designs motor grader frame and drawbar components to give you performance and durability.
  • The one-piece forged steel circle stands up to high stress loads, and a sacrificial wear system helps keep your service time and costs down.
  • Articulation hitch features a large tapered roller bearing to carry loads evenly and smoothly. It is sealed to prevent contamination and a locking pin prevents articulation during service or transport.
  • The drawbar, circle and moldboard make it easy for you to keep the components tight.
  • Shims and patented top-adjust wear strips are easy to add or replace, reducing downtime.
  • Durable nylon composite wear inserts maximize circle torque and component life.
  • Wear strips between the blade mounting group and moldboard can be easily adjusted and replaced.
  • Shim less Moldboard Retention System uses vertical and horizontal adjusting screws to keep moldboard wear strips aligned for reduced blade chatter and precise blade control.
  • An aggressive blade angle, optimized moldboard curvature and large throat clearance help you work more efficiently by allowing material to roll more freely along the blade.
  • Heat-treated rails, hardened cutting edges and end bits, and heavy duty bolts to give you greater moldboard reliability and long service life.
  • Link bar allows extreme moldboard positioning for easier bank sloping and ditch cutting/cleaning.
  • Proven load-sensing hydraulic system and advanced electro-hydraulics give you superior implement control and responsive performance that makes operator's jobs easier. Continuously matching hydraulic flow/pressure to power demands creates less heat and reduces power consumption.
  • Consistent, Predictable Movement - Proportional Priority Pressure-Compensating (PPP-C) valves have different flow rates for the head and rod ends of the cylinder, so you can count on consistent, predictable implement response.
  • Balanced Flow - Hydraulic flow is proportioned to give you confidence that all implements will operate simultaneously without slowing the engine or speed of some implements.
  • Blade can float freely under its own weight. By floating both cylinders, the blade can follow the contours of the ground. Floating only one cylinder permits the toe of the blade to follow a hard surface while the operator controls the slope with the other lift cylinder.
  • Large, separate hydraulic oil supplies prevent cross-contamination and provide proper oil cooling, reducing heat build-up and extending component life.
  • Cat XT™ hose allows high pressures for maximum power and reduced downtime.

TECHNOLOGY THAT GETS WORK DONE

  • Cat technologies makes smart use of technology and services to improve job site efficiency. Using the data from technology equipped machines, get more information and insight into equipment and operations
  • Cat technologies offer improvements in these key areas:
  • Equipment Management - increase uptime and reduce operating costs.
  • Productivity - monitor production and manage job site efficiency.
  • Safety - enhance job site awareness to keep your people and equipment safe.
  • Featured Cat technologies include -
  1. Link technologies that provide wireless capability to machines enabling two-way transfer of information collected by on-board sensors, control modules, and other Cattechnologies using off-board apps, such as Cat VisionLink® software.
  2. Cat Product Link/VisionLink is deeply integrated, helping take guesswork out of equipment management. Easy access to timely information like machine location, hours, fuel usage, idle time and event codes via the online VisionLink user interface helps effectively manage fleet and lower operating costs.
  3. Grade technologies combine digital design data, in-cab guidance, and automatic blade controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.
  4. Cat GRADE with Cross Slope is an optional, factory installed system that helps improve grading efficiency and more easily maintain accurate cross slopes. The system automatically controls one side of the blade, reducing manual operator inputs by as much as 50 percent. Experienced operators can maintain peak efficiency levels throughout more of the work day, while less experienced operators can be more productive faster. The system is job-ready from day one, and scalable for the future withupgrade kits that provide additional 2D and/or 3D control.
  • Cat Messenger, combined with full systems integration, enhances diagnostic capability for quick analysis of critical data.
  • Electronic Technician (Cat ET) lets service technicians access stored diagnostic data and configure machine parameters through the Cat Data Link.
  • Low Battery Elevated Idle raises idle speed when low system voltage is detected, ensuring adequate system voltage and improving battery reliability.
  • Automatic Engine Deration protects the engine by automatically lowering engine torque output and alerting the operator if critical conditions are detected.

BUILT-IN SAFETY FEATURES

  • Operator Presence Monitor keeps the parking brake engaged and hydraulic implements disabled until the operator is seated and the machine is ready for operation.
  • Speed Sensitive Steering lessens steering sensitivity as ground speed increases for greater operator confidence and control.
  • Secondary Steering System's electric hydraulic pump automatically engages in case of a drop in steering pressure to ensure operator can steer the machine to a stop.
  • Hydraulic lockout disables all implement functions while still providing machine steering control. Especially useful while roading.
  • Brakes are located at each tandem wheel to eliminate braking loads on the power train. Redundant brake systems utilize accumulators to enable stopping in case of machine failure.
  • Perforated steel tandem walkways and convenient grab rails provide a sturdy platform when moving on, off and around the machine.
  • Circle Drive Slip Clutch protects the drawbar, circle and moldboard from shock loads if the blade encounters an immovable object and also reduces the possibility of abrupt directional changes in poor traction conditions.
  • Blade Lift Accumulators help absorb impact loads by allowing vertical blade travel. This optional feature reduces wear and impact loading for enhanced operator safety.
  • Safety Features -
  1. Optional rearview camera with in-cab monitor
  2. New, optional seat belt indicator light reminds operator to fasten safety belt
  3. Grouped, ground level service points
  4. Laminated front window glass
  5. Optional LED Lighting
  6. Ground-level electrical disconnect switch
  7. Ground-level engine shutoff switch
  8. Anti-glare paint eases night operation
  9. Optional front and rear fenders

TOP-TIER SERVICE AND SUPPORT

  • Cat motor graders are designed to help you increase uptime and reduce costs.
  • Grouped service points and extended service intervals save maintenance time.
  • New, optional LED lights in the left hand compartments make it more convenient to service the machine in low light.
  • Cat dealers are second to none. From machine selection and purchase to maintenance support, operator training and rebuilds, Cat dealers have the experience and capabilities to help keep you up and running at peak performance.
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Power Train
    • Air cleaner, dual stage, dry type, diesel, with automatic engine derate and automatic dust ejector, service indicator through Cat Messenger
    • Air-to-air after cooler (ATAAC)
    • Belt, serpentine, automatic tensioner
    • Brakes, oil disc, four-wheel, hydraulic
    • Demand fan, hydraulic, swing-out
    • Diesel exhaust fluid tank, 22.0 L (5.8 gal) ground level access, and sediment drain
    • Differential Lock/Unlock, Automatic
    • Drain, engine oil, ecology
    • Economy mode
    • Electronic over speed protection
    • Engine, C9.3 U.S. EPA Tier 4 Final/EU Stage V emission standards
    • Fuel tank, 394 L (104 gal), ground level access and sediment drain
    • Parking brake - multi-disc, sealed, oil-cooled
    • Priming pump, fuel
    • Rear axle, modular
    • Sediment drain, fuel tank
    • Tandem drive
    • Transmission, 8F/6R, powershift, direct drive, Advanced Productivity Electronic Control Strategy (APECS)
  • Electrical
    • Alarm, back up
    • Alternator, 150 ampere, sealed
    • Batteries, maintenance free, heavy duty, 1125 CCA
    • Breaker panel, ground accessible
    • Cab harness and electrical hydraulic valves
    • Electrical system, 24V
    • Grade Control Ready - Cab harness, software, electrical hydraulic valves, bosses and brackets
    • Lights, roof-mounted roading, reversing, LED stop and tail
    • Product Link
    • Starter, electric
  • Operator Environment
    • Accelerator
    • Air conditioning with heater
    • Arm and wrist rest, electronically adjustable
    • Articulation, automatic Return-to-Center
    • Cat Messenger operator information system
    • Centershift pin indicator
    • Coat hook
    • Cup holder
    • Display, digital speed and gear
    • Doors, left and right side with wiper
    • Gauge, machine level
    • Gauge cluster (analog) - fuel, articulation, engine coolant temp, engine RPM, hydraulic oil temp, regen, DEF
    • Hour meter, digital
    • Joystick hydraulic controls right/left blade lift with float position, circle drive, blade sideshift and tip, centershift, front wheel lean, articulation and power steering
    • Joystick, adjustable armrests
    • Joystick gear selection
    • Joystick hydraulic power steering
    • Ladders, cab, left and right side
    • Lights, night time cab
    • Mirror, inside rearview, wide angle
    • Power port, 12V
    • Radio Ready, Entertainment
    • ROPS cab, sound suppressed 70 dB(A)
    • Seat, cloth-covered, comfort suspension
    • Seat belt, retractable 76 mm (3 in)
    • Storage area for cooler/lunchbox
    • Throttle control, electronic
    • Windows, laminated glass: - fixed front with intermittent wiper - door with intermittent wipers (3)
    • Windows: tempered: - left and right side wipers - rear and intermittent wiper
  • Fluids
    • Antifreeze
    • Extended Life Coolant to -35° C (-30° F)
  • Tires, Rims And Wheels
    • Partial allowance for tires on 254 — 607 mm (10 — 24 in) multi-piece rims is included in the base machine price and weight
  • Other Standard Equipment
    • Accumulators, brake, dual certified
    • Anti-glare paint
    • Bumper, rear, integrated with hitch
    • CD ROM Parts Book
    • Clutch, circle drive slip
    • Cutting edges: - 152 — 16 mm (6 — 5/8 in) - curved DH-2 steel - 19 mm (3/4 in) mounting bolts
    • Doors (3), engine compartment, locking
    • Drawbar - 6 shoes, replaceable wear strips
    • Electrical hydraulic valves, hydraulic lines for base 8 functions
    • Endbits: - 16 mm (5/8 in) DH-2 steel - 19 mm (3/4 in) mounting bolts
    • Fluid check, ground level
    • Frame, articulated, with safety lock
    • Ground level engine shutdown
    • Hammer (emergency exit)
    • Horn, electric
    • Hydraulic lines for base functions
    • Lockout, hydraulic implement (for roading and servicing)
    • Moldboard
    • Mounting, cab roof accessories
    • Pump, hydraulic, high capacity, 98 cm³ (6 in³)
    • Radiator, cleanout access (both sides with swing doors)
    • Secondary steering
    • Serviceability, LH side
    • S·O·S„  ports: engine, hydraulic, transmission, coolant, fuel
    • Tandem walkway/guards
    • Tool box
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Electrical
    • Alternator, 280 ampere
    • Batteries: extreme duty, 1,400 CCA
    • Lights: Headlights, high
    • Lights: Headlights, low
    • Lights: Working lights, basic
    • Lights: Working lights, plus, LED
    • Lights: Warning: beacon or strobe
    • Lights: Mounting for warning light
  • Guards
    • Articulation guard
    • Fenders, front
    • Fenders, rear
    • Front axle guard
    • Sound suppression (bottom)
    • Sound suppression (enclosure)
    • Transmission
  • Operator Environment
    • Mirrors, outside: heated 24V
    • Mirrors, outside: mounted
    • Comfort Plus Arrangement
    • Comfort Premium Arrangement
  • Power Train
    • All Wheel Drive
    • Precleaner, snow
    • Starter, extreme duty, 1,000 Amps
    • Transmission, autoshift
  • Other Attachments
    • Attachment Ready Option (ARO)
    • Cross Slope
    • Accumulators, blade lift
    • Camera, rearview
    • Cat Product Link 321SR
    • Cat Product Link 522
    • Drain, ecology, engine Wiggins
    • Heater, engine coolant: 120V
    • Heater, engine coolant: 240V
    • Hydraulic arrangements with one or more additional hydraulic valves are available for rear ripper, dozer, snow plow and snow wing.
    • Snow wing mounting, frame ready
    • Starting aid, ether
    • Reversing fan, automatic or manual
    • Cat Grade with 3D
  • Work Tools/g.e.t.
    • Blade extension, left hand, 610 mm (2 ft)
    • Blade extension, right hand, 610 mm (2 ft)
    • Counterweight
    • Cutting edges, curved
    • Endbits, overlay
    • Front lift group, mounting
    • Front lift group, mechanical
    • Grader bit, narrow and super penetration
    • Mid-Mount Scarifier, Package
    • Moldboard: 4267 mm — 610 mm — 22 mm (14 ft× 24 in — 7/8 in)
    • Moldboard: 4267 mm — 686 mm — 25 mm (14 ft — 27 in — 1 in)
    • Push plate
    • Ripper, rear
    • Ripper tooth
    • Scarifier, front
    • Snow Arrangement
    • Snow Wing Ready Package
    • Tow hitch
  • Machine Arrangements
    • Canadian Arrangement
    • European Arrangement
    • TUV Roading Arrangement
  • Optional Tire Arrangements
    • Rim Size - 9 × 24; Wheel Group - Single-Piece; Tires - 14.0R24
    • Rim Size - 13 × 25; Wheel Group - Single-Piece; Tires - 17.5R25
    • Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.0R24
    • Rim Size - 10 × 24; Wheel Group - Multi-Piece; Tires - 14.0-24
    • Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5R25
    • Rim Size - 14 × 25; Wheel Group - Multi-Piece; Tires - 17.5-25
    • Note: Consult your dealer for individual tire width, size and brand.

Related Used Equipment


×