3606 Generator Set (Medium Speed)

3606 Generator Set (Medium Speed)

Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Minimum Rating 1775 kVA
Request a Quote Download Brochure
Engine Specifications
Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Engine Model 3606 I-6, 4-Stroke Water-Cooled Diesel
Total Displacement 6,762 in³
Compression Ratio 13:01
Governor Type Generator Set Monitoring System (GMS)
Aspiration TA
Fuel System Direct unit injection
Bore 11 in
Displacement 6,762 in³
Stroke 12 in
Fuel System 6,762 in³
Generator Set Specifications
Minimum Rating 1775 kVA
Maximum Rating 2688 kVA
Frequency 50 Hz
Speed 750 & 1000 rpm
Emissions/Fuel Strategy Low Fuel Consumption
Duty Cycle Continuous
Generator Set Dimensions
Length - Maximum 404 in
Width - Maximum 100 in
Height - Maximum 157 in
Dry Weight - Genset (maximum) 74,970 lb

Cat Diesel Engine

SR5 Alternator

Worldwide Product Support

Full Range of Attachments

  • Air Inlet System
    • Breather, crankcase, top-mounted
    • Air inlet shutoff
    • Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
    • Aftercooler, fresh water, corrosion resistant coated (air side)
  • Cooling System
    • Water temperature regulator
    • Engine coolant water drains
    • Jacket water thermostats
  • Exhaust System
    • 457 mm (18 in) Cat bolt pattern
    • Dry, gas tight, exhaust manifold
    • Includes adapter, flexible exhaust fitting
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Oil pressure regulating valve
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Oil filler and dipstick
    • Crankcase explosion relief valves
    • Service side engine mounted on cylinder block inspection covers
    • Centrifugal oil filters with single shutoff
  • Mounting System
    • Damper, torsional vibration
    • Engine and generator mounting
  • Starting / Charging System
    • One motor, engine mounted at rear, on left side
    • Vane type air starter
    • Air silencer
    • Line group for single point custom connection
  • General:
    • Paint, Caterpillar yellow
    • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
  • Air Inlet System
    • Boost control valve
    • Soot filter
    • Heavy duty air cleaner
    • Air inlet adapter
    • Vertical support bracket
    • Air cleaner louver assembly
    • Air cleaner
  • Cooling System
    • Expansion tank
    • Auxiliary water pump
    • Cooling system aids
    • Heating aids
  • Exhaust System
    • Weld flange and related hardware
    • Flexible exhaust fittings
  • Fuel System
    • Fuel system connections
    • Duplex primary fuel strainer
    • Fuel priming pump
  • Generator System
    • Class F insulation
    • 3 Phase, six Leads, WYE
    • Anti-condensation space heaters
    • Winding temperature detectors
    • Busbar connections
  • Governor System
    • Electronic/actuators
    • Digital programmers
    • 2301 A load share
    • EGB actuator
    • Battery backup/power supply
    • 723 Plus
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Non-vertically restrained
    • Spring type vibration isolators
    • Vertically restrained
    • Isolator
  • Starting / Charging System
    • Compressed air flex hose
    • Pressure reducing valve
  • General:
    • Custom paint colors
×