3616 Generator Set (Medium Speed)

3616 Generator Set (Medium Speed)

Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Minimum Rating 3350 ekW
Request a Quote Download Brochure
Engine Specifications
Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Engine Model 3616 V-16,4-Stroke Water-Cooled Diesel
Total Displacement 18,032 in³
Compression Ratio 13:01
Governor Type Generator Set Monitoring System (GMS)
Aspiration TA
Fuel System Direct unit injection
Bore 11 in
Displacement 18,032 in³
Stroke 12 in
Fuel System 18,032 in³
Generator Set Specifications
Minimum Rating 3350 ekW
Maximum Rating 5320 ekW
Frequency 60 Hz
Speed 720 & 900 rpm
Emissions/Fuel Strategy Low Fuel Consumption
Duty Cycle Prime, Continuous
Generator Set Dimensions
Length - Maximum 404 in
Width - Maximum 100 in
Height - Maximum 157 in
Dry Weight - Genset (maximum) 141,840 lb

Cat Diesel Engine

Generator

World Wide Product Support

Full Range of Attachments

  • Air Inlet System
    • Air cleaner
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Breather, crankcase, top-mounted
    • Turbocharger, watercooled, engine oil lubricated
    • Air inlet shutoff
  • Cooling System
    • Three-bundle oil cooler
    • Jacket water thermostats
    • Water temperature regulator
    • Engine coolant water drains
    • Front Mounted turbos
  • Exhaust System
    • Dry, gas tight, exhaust manifold
    • 457 mm (18 in) Cat bolt pattern
    • Includes adapter, flexible exhaust fitting
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Service Side Engine mounted on Cylinder Block Inspection Covers
    • Centrifugal oil filters with single shutoff
    • Oil filler and dipstick
    • Oil pressure regulating valve
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Crankcase explosion relief valves
  • Mounting System
    • Damper, torsional vibration
    • Engine and generator mounting
  • Starting / Charging System
    • Line group for single point custom connection
    • Two Motors, engine mounted at rear, on left side
    • Air silencer
    • Vane type air starter
  • General:
    • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
    • Paint, Caterpillar yellow
  • Air Inlet System
    • Heavy duty air cleaner
    • Soot filter
    • Boost control valve
    • Vertical support bracket
    • Air Inlet Adapter
    • Air cleaner louver assembly
  • Cooling System
    • Cooling system aids
    • Auxiliary water pump
    • Heat exchanger for single circuit
    • Expansion tank
    • Heating aids
  • Exhaust System
    • Flexible exhaust Fittings
    • Weld flange and related hardware
  • Fuel System
    • Duplex Primary Fuel Strainer
    • Fuel priming pump
    • Fuel system connections
  • Generator System
    • 3 Phase, Six Leads, WYE
    • Anti-condensation space heaters
    • Winding temperature detectors
    • Busbar connections
    • Class F insulation
  • Governor System
    • 723 Plus
    • Electronic/actuators
    • EGB actuator
    • Digital programmers
    • 230 UA
    • Battery backup/power supply
  • Lube System
    • Lube ANSI Adapter (Emergency connection)
    • Oil pan drain valve
  • Mounting System
    • Isolator
    • Non-vertically Restrained
    • Vertically Restrained
    • Spring type vibration isolators
  • Starting / Charging System
    • Pressure reducing valve
    • Compressed air flex hose
    • Turbine type air starters
    • Redundant air starters
  • General:
    • Custom paint colors
×