C32 (50 Hz) with Upgradeable Packaging

Overview
Aspiration
TA
Fuel System
MEUI
Minimum Rating
910 kVA

The C32 with the upgradeable packaging design has been developed for a wide range of applications, from emergency standby installations such as healthcare and datacenters to continuously powering remote installations. The packages can be optimized for performance to matters to you with either low emissions or low fuel consumption versions available. Backed by the worldwide network of Cat dealers ready to support your operation with technical support, service, parts, and warranty, Cat generator sets will provide the reliability and durability you expect.

Engine Specifications

Aspiration
TA
Fuel System
MEUI
Engine Model
C32 TA, V-12, 4-Stroke Water-Cooled Diesel
Bore
145 mm (5.71 in)
Stroke
162 mm (6.38 in)
Displacement
32.1 L (1958.86 in3)
Compression Ratio
15.0:1
Governor Type
Adem™A4
Exhaust Flange Size - Internal Diameter
203.2 mm (8.0 in)
Air Inlet
Single element canister style with service indicator
Aspiration
TA
Fuel System
MEUI
Air Inlet
Single element canister style with service indicator
Displacement
1,959 in³
Stroke
6 in
Bore
6 in

Generator Set Specifications

Minimum Rating
910 kVA
Maximum Rating
1500 kVA
Voltage
400 to 415 Volts
Frequency
50 Hz
Speed
1500 rpm
Emissions/Fuel Strategy
Low Fuel, Low Emissions
Duty Cycle
Standby, Mission Critical, Prime, Continuous

Generator Set Dimensions

Height - Maximum
86 in
Length - Maximum
179 in
Width - Maximum
88 in
Length - Minimum
165 in
Width - Minimum
66 in
Height - Minimum
85 in
Dry Weight - Genset (minimum)
14,680 lb
Dry Weight - Genset (maximum)
17,855 lb

Cat Generator Set Package

  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements
  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

SR5 Alternator

  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation
  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation

EMCP 4 Control Panel

  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements
  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirement
  • Expansion modules and site-specific programming for specific customer requirements

Cooling System

  • Designed to operate in standard ambient temperatures up to 50°C (122°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities
  • Designed to operate in standard ambient temperatures up to 50°C (122°F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

  • EU Certification of Conformance (CE)
  • EEC Declaration of Conformity

One Safe Source

  • Components used in the generator set are selected at the design stage to provide optimum package performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system
  • Components used in the generator set are selected at the design stage to provide optimum package performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

World Wide Product Support

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
  • Air Inlet System
    • Single element canister type with service indicator
  • Control Panel
    • EMCP 4.2
    • Warning Shutdowns
    • Digital Indicators
    • Control Features
    • Communications
    • Programmable Protective Relaying Functions
  • Cooling System
    • Radiator fan and fan drive
    • Low coolant level sensor
    • ATAAC
    • Coolant drain line with valve
    • Fan and belt guards
    • Caterpillar Extended Life Coolant
  • Exhaust System
    • Exhaust manifold - Dry
    • 203 mm (8 in) ID round flanged outlet
  • Fuel System
    • Fuel priming pump
    • Primary fuel filter with water separator
    • Fuel cooler
    • Secondary fuel filters
  • General
    • RH Service
    • Caterpillar Yellow with high gloss black rails & radiator
    • Flywheel and flywheel housing-SAE
    • SAE Standard Rotation
  • Generators And Attachments
    • Reactive droop
    • Winding temperature detectors
    • Class H temperature rise at 40C ambient
    • Busbar connections, top center mounted, top cable entry
    • Permanent magnet
    • NEMA Class H insulation
    • Salient pole
    • IEC standard hole pattern
    • 6 Lead
    • Integrated voltage regulator (IVR)
    • 3 Phase brushless
    • Internal excitation
  • Governing System
    • ADEM(tm) A4
  • Lube System
    • Gear type lube oil pump
    • Integral lube oil cooler
    • Lubricating oil
    • Oil filter, filler and dipstick
    • Oil drain lines and valve
    • Fumes disposal
  • Mounting System
    • Rails - engine/generator/radiator mounting
    • Rubber anti-vibration mounts
  • Power Termination
    • Busbar
  • Starting / Charging System
    • 45 amp charging alternator
    • Battery, rack and cables
    • 24-volt electric starting motor
    • Battery disconnect switch
  • Control System
    • Expansion I/O module
    • EMCP 4.3, EMCP 4.4
    • Remote annunciator module
    • Remote monitoring software
    • Local annunciator module
    • Remote annunciator module
    • EMCP (4.2) (4.3) (4.4)
    • Local annunciator module
  • Engine Options
    • Radiator duct flange
    • Exhaust guards / shields
    • Heavy duty electric starting motors
    • Dual element air cleaners
    • Heavy duty air cleaners
    • Muffler (industrial grade)
  • Engine System
    • Heavy duty electric starting motors
    • Battery charger (10 amps)
    • Spring type anti-vibration mounts (95% efficient)
    • Heavy duty batteries
    • Heavy duty air cleaners
    • Dual element air cleaners
    • Exhaust guards / shields
    • Muffler (industrial grade)
    • Radiator duct flange
    • Jacket water heater
    • Rubber anti-vibration mounts (90% efficient)
  • Extended Service Contract
    • 2 Year Extended Service Contract (ESC)
    • 3 Year Extended Service Contract (ESC)
    • 5 Year Extended Service Contract (ESC)
  • Generators
    • Anti-condensation heaters
    • Winding: [ ] Random [ ] Random with coastal insulation [ ] Form
    • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
    • Temperature Rise over 40°C ambient: [ ] 150°C [ ] 125°C [ ] 105°C [ ] 80°C
    • Generator stator and bearing temperature monitoring & protection
    • Excitation: [ ] Permanent Magnet Excited (PM) [ ] Internally Excited (IE)
    • Winding: [ ] Random [ ] Random with coastal insulation [ ] Form
    • Temperature Rise over 40°C ambient: [ ] 150°C [ ] 125°C [ ] 105°C [ ] 80°C
  • Power Termination
    • Circuit breaker, IEC listed (fully rated)
    • Bus bars
    • Circuit breaker, 100% Rated, UL Listed (fully rated)
×