Cat generator set packages have been fully prototype tested
Accepts 100% block load in one step and meets NFPA 110 loading requirements
Conform to ISO 8528-5 steady state and transient response requirements
Cat Diesel Engine
Reliable, rugged, durable design
Field-proven in thousands of applications worldwide
Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight
M-Frame Alternator
Superior motor starting capability minimizes need for oversizing alternator
Designed to match performance and output characteristics of Cat diesel engines
Robust Class H insulation
GCCP 1.2 Control Panel
User-friendly interface and navigation
Scalable system to meet a wide range of installation requirement
Expansion modules and site-specific programming for specific customer requirements
Cooling System
Designed to operate in standard ambient temperatures up to 55°C (131°F)
Contact your Cat Dealer for specific ambient and altitude capabilities
Certifications
UL 2200 Listed
ULC Certification Available
One Safe Source
Components used in the generator set are selected based on seamless design integration to provide the optimum performance
The generator set is fully assembled at a Caterpillar facility following our quality guidelines
Each generator set package is tested before leaving the Caterpillar facility
Cat product support, including dealer service, parts and warranty covers the entire Cat power system
World Wide Product Support
Cat dealers have over 1,800 dealer branch stores operating in 200 countries
Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Certificates
IBC Seismic and Wind Certifications
Air Inlet System
Air Cleaner
Cartridge type air filter
Circuit Breakers
Breakers (100% UL rated)
Second circuit breaker box
3-Pole 100% rated
Power perminal strips
Charging System
NFPA battery charger UL10A 120VAC
Control Panel
GCCP 1.2 Control panel
Exhaust System
Stub pipe, gaskets, raincap and SAE exhaust flange for customer use - shipped loose
Fuel System
Standard open set fuel tank / base supplied base, formed steel with single wall integral 24-hour fuel tank
Control Panels
NFPA110 bundle includes:
WSS1 Low coolant level shut down
WCA1 Low coolant temperature alarm
FSS low fuel level alarm & indication panel circuitry required when sub-base tank is selected
PBC10NU NFPA Battery Charger
Oil temperature guage and sender
A coolant heater, remote annunciator or 0.8 power factor test may be required depending on the application
PAA1 Panel mounted audible alarm
Remote E-stop button
Volt free contacts genset run and common alarm
Discrete I/O module
Audible alarm
Ground fault relay
Remote annunciator
Overload shutdown via breaker
Low coolant level shutdown
Fuel level reading
Protective devices:
Low coolant temperature alarm
Cooling System
Caterpillar extended life coolant
Radiator and cooling fan with guards
Coolant drain line with valve
Fan drive, battery charging alternator drive
Radiator stone guard
Generator
12 Leads
Governing System
Mechanical and electrical governing system - model dependent
Lube System
Lubricating oil
Oil drain line with valve
General
Engine and alternator pre-paint, Caterpillar Yellow
Starting/charging System
Batteries
24V battery with rack and cables
Certificates
IBC Seismic and Wind Certifications
Air Inlet System
Cartridge type air filter
Alternator System
R frame auxilliary winding
Charging System
NFPA battery charger UL10A 120VAC
Circuit Breakers
Power perminal strips
Second circuit breaker box
Breakers (100% UL rated)
3-Pole 100% rated
Control Panels
Volt free contacts genset run and common alarm
Protective devices: Low coolant temperature alarm - Low coolant level shutdown - Fuel level reading - Overload shutdown via breaker
Discrete I/O module
Audible alarm
Ground fault relay
Remote annunciator
NFPA110 bundle includes: FSS low fuel level alarm & indication panel circuitry required
when sub-base tank is selected - WSS1 Low Coolant level shut down - WCA1 Low Coolant temperature alarm - PAA1 Panel mounted audible alarm - PBC10NU NFPA Battery Charger - A coolant heater ,remote annunciator or 0.8 power factor test may be required depending on the application