3516B (50 Hz) Generator Set

  • Exterior View

3516B (50 Hz) Generator Set

Bore 7 in
Displacement (HD) 4,765 in3
Stroke (HD) 8 in
Aspiration TA
Fuel System Electronic unit injection
Minimum Rating 2000 kVA
Request a Quote Download Brochure
Engine Specifications
Bore 7 in
Displacement (HD) 4,765 in3
Stroke (HD) 8 in
Aspiration TA
Fuel System Electronic unit injection
Engine Model 3516B TA, V-16, 4-Stroke Water-Cooled Diesel
Displacement - Std 4,211 in³
Stroke - Standard 7 in
Compression Ratio 15.5:1
Governor Type Adem™3
Aspiration TA
Fuel System Electronic unit injection
Bore 7 in
Displacement - HD 4,765 in³
Stroke - HD
Fuel System 7 in
Stroke 8 in
Displacement 4,765 in
Generator Set Specifications
Minimum Rating 2000 kVA
Maximum Rating 2500 kVA
Voltage 380 to 11000 Volts
Frequency 50 Hz
Speed 1500 rpm
Emissions/Fuel Strategy Low Fuel, Low Emissions
Duty Cycle Standby, Mission Critical, Prime, Continuous
Standby Rating 2500 kVA
Prime Power Rating 2275 kVA
Generator Set Dimensions
Length - Maximum 252 in
Width - Maximum 90 in
Height - Maximum 93 in
Dry Weight - Genset (maximum) 40,320 lb
Length - Minimum 233 in
Dry Weight - Genset (minimum) 31,900 lb

Cat Generator Set Package

  • Cat generator set packages have been fully prototype tested
  • Accepts 100% block load in one step and meets NFPA 110 loading requirements
  • Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

  • Reliable, rugged, durable design
  • Field-proven in thousands of applications worldwide
  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

SR5 Alternator

  • Superior motor starting capability minimizes need for oversizing alternator
  • Designed to match performance and output characteristics of Cat diesel engines
  • Robust Class H insulation

Cat ECS Control Panel

  • User-friendly interface and navigation
  • Scalable system to meet a wide range of installation requirements
  • Expansion modules and site-specific programming for specific customer requirements

Cooling System

  • Designed to operate in standard ambient temperatures up to 50�C (122�F)
  • Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

  • IBC seismic certification
  • EU Declaration of Conformity
  • EU Declaration of Incorporation
  • Eurasian Conformity (EAC)

Single-Source Supplier

  • Components used in the generator set are selected at the design stage to provide optimum package performance
  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  • Each generator set package is tested before leaving the Caterpillar facility
  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

Worldwide Product Support

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
  • Air Inlet
    • Air cleaner
  • Cooling
    • Package mounted radiator
  • Exhaust
    • Exhaust flange outlet
  • Fuel
    • Secondary fuel filters
    • Fuel priming pump
    • Primary fuel filter with integral water separator
  • Generator
    • Matched to the performance and output characteristics of Cat engines
    • IP23 Protection
  • Power Termination
    • Busbar
  • Control Panel
    • Cat ECS 100
  • General
    • Paint - Caterpillar yellow except rails and radiators gloss black
  • Exhaust
    • Exhaust mufflers (except Tier 4)
  • Generator
    • Permanent magnet excitation (PMG)
    • Internal excitation (IE)
    • Anti-condensation heater
    • Oversize and premium generators
  • Power Termination
    • Circuit breakers, UL listed
    • Circuit breakers, IEC compliant
  • Control Panels
    • Generator temperature monitoring & protection
    • Digital I/O module
    • Load share module
    • EMCP 4.4
    • Remote monitoring software
  • Mounting
    • Spring type vibration isolators
    • IBC isolators
    • Rubber anti-vibration mounts
  • Starting/charging
    • Oversize batteries
    • Charging alternator
    • Heavy duty starting system
    • Jacket water heater
    • Air starting motor with control and silencer
    • Battery chargers
  • General
    • Seismic Certification per applicable building codes: IBC 2000, IBC 2003, IBC 2006, IBC 2009, CBC 2007
    • EU Certificate of Conformance (CE)
    • The following options are based on regional and product configuration:
    • Enclosures: Sound attenuated, weather protective
    • Automatic transfer switches (ATS)
    • UL 2200 package
    • Integral & sub-base UL listed dual wall fuel tanks
    • Integral & sub-base fuel tanks
    • EEC Declaration of Conformity
    • CSA Certification
×