3612 Generator Set (Medium Speed)

3612 Generator Set (Medium Speed)

Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Minimum Rating 3300 ekW
Request a Quote Download Brochure
Engine Specifications
Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Engine Model 3612 V-12,4-Stroke Water-Cooled Diesel
Total Displacement 13,524 in³
Compression Ratio 13:01
Governor Type Generator Set Monitoring System (GMS)
Aspiration TA
Fuel System Direct unit injection
Bore 11 in
Displacement 13,524 in³
Stroke 12 in
Fuel System 13,524 in³
Generator Set Specifications
Minimum Rating 3300 ekW
Maximum Rating 4000 ekW
Frequency 60 Hz
Speed 720 & 900 rpm
Emissions/Fuel Strategy Low Fuel Consumption
Duty Cycle Prime, Continuous
Generator Set Dimensions
Length - Maximum 404 in
Width - Maximum 100 in
Height - Maximum 157 in
Dry Weight - Genset (maximum) 112,690 lb

Cat Diesel Engine

Generator

Worldwide Product Support

Full Range of Attachments

  • Air Inlet System
    • Turbocharger, watercooled, engine oil lubricated
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Air cleaner
    • Breather, crankcase, top-mounted
    • Air inlet shutoff
  • Cooling System
    • Jacket water thermostats
    • Engine coolant water drains
    • Water temperature regulator
    • Three-bundle oil cooler
    • Front mounted turbos
  • Exhaust System
    • Dry, gas tight, exhaust manifold
    • 457 mm (18 in) Cat bolt pattern
    • Includes adapter, flexible exhaust fitting
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by Dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Oil pressure regulating valve
    • Oil filler and dipstick
    • Service side engine mounted on cylinder block inspection covers
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Centrifugal oil filters with single shutoff
    • Crankcase explosion relief valves
  • Mounting System
    • Engine and generator mounting
    • Damper, torsional vibration
  • Starting / Charging System
    • Vane type air starter
    • Air silencer
    • Line group for single point custom connection
    • Two motors, engine mounted at rear, on left side
  • General:
    • Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
    • Paint, Caterpillar yellow
  • Air Inlet System
    • Boost control valve
    • Air inlet adapter
    • Soot filter
    • Vertical support bracket
    • Air cleaner louver assembly
    • Heavy duty air cleaner
  • Cooling System
    • Heat exchanger for single circuit
    • Heating aids
    • Cooling system aids
    • Expansion tank
    • Auxiliary water pump
  • Exhaust System
    • Weld flange and related hardware
    • Flexible exhaust fittings
  • Fuel System
    • Fuel system connections
    • Fuel priming pump
    • Duplex primary fuel strainer
  • Generator System
    • Busbar connections
    • Anti-condensation space heaters
    • Class F insulation
    • Winding temperature detectors
    • 3 Phase, six leads, WYE
  • Governor System
    • 723 Plus
    • Digital programmers
    • Electronic/actuators
    • Battery backup/power supply
    • 230 UA
    • EGB actuator
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Spring type vibration isolators
    • Non-vertically restrained
    • Vertically restrained
    • Isolator
  • Starting / Charging System
    • Redundant air starters
    • Turbine type air starters
    • Pressure reducing valve
    • Compressed air flex hose
  • General:
    • Custom paint colors
×