Cat C32 ACERT Generator Set (EPA Tier 3)

Exterior View

Cat C32 ACERT Generator Set (EPA Tier 3)

Minimum Rating	730 ekW (913 kVA)
Maximum Rating	940 ekW (1175 kVA)
Frequency	60hz
Speed	1800 rpm
Emissions/Fuel Strategy	EPA Tier III
Engine Model	Vee-12, 4-stroke-Cycle-Diesel

Request a Quote

Generator Set Specifications

Minimum Rating	730 ekW (913 kVA)
Maximum Rating	940 ekW (1175 kVA)
Frequency	60hz
Speed	1800 rpm
Minimum Rating	730 ekW (913 kVA)
Maximum Rating	940 ekW (1175 kVA)
Frequency	60hz
Speed	1800 rpm
Emissions/Fuel Strategy	EPA Tier III

Generator Set Configurations

Emissions/Fuel Strategy

EPA Tier III

Engine Specifications

Engine Model	Vee-12, 4-stroke-Cycle-Diesel
Aspiration	Turbocharged and aftercooled
Bore	6 in
Stroke	6 in
Displacement	1,959 in3
Governor Type	Electronic
Fuel System	MEUI
Aspiration	Turbocharged and aftercooled
Bore	6 in
Stroke	6 in
Displacement	1,959 in³
Governor Type	Electronic
Engine Model	Vee-12, 4-stroke-Cycle-Diesel

Generator Set Dimensions

Width	60 in
Height	66 in
Weight (Estimated)	15,721 lb
Length	162.8 in/4271 mm (minimum), 175.3 in/4452 mm (maximum)
Width	60 in
Height	66 in
Weight - Estimated	15,721 lb

Generator Specifications

Excitation	Permanent magnet
Number of Poles	4
Number of Bearings	2 roller bearings
Number of Leads	6
Insulation	Class H
IP Rating	23
Voltage Regulator	CDVR

Emissions

U.S. EPA Tier 3 compliant

Worldwide Support

Extensive service network of dealers; Unparalleled service from authorized marine dealers

Durability

Proven engine operating history; Performance iron with thousands of hours of validation testing for quality and durability

Reliability

60 months standard warranty

Cooling System

Heat Exchanger or Keel Cooling; Heat exchanger configurations: optional front mounted sea water pump

Aftercooling System

Separate circuit aftercooling system (SCAC): no seawater circulating through the aftercooler

Air Inlet System
- Separate circuit after-cooled (SCAC)
- Turbocharger, jacket water cooled
- Turbocharger inlet, 152 mm (6 in) OD straight connection
Control System
- If an EMCP panel or MGCP option is not chosen as optional equipment, then start/stop controls must be provided by the customer
- Electronic diagnostics and fault logging
- Engine Protection Mode for extended ambient conditions
- Electronic fuel/air ratio control
Cooling System
- Separate Circuit After-Cooling (SCAC) for Heat Exchanged (HEX) & Keel cooled engines
- Jacket Water (JW) and SCAC Heat Exchangers Shell & Tube for HEX cooled engines
- SCAC pump, gear driven
- Jacket water pump, gear driven
- Sea water pump, bronze impeller, gear driven, for HEX cooled engines only
- Jacket water HEX with Sea water pump Connections: 76.2 mm (3in) ID Standard
- 4 Bolt ANSI Flange Connection
- Jacket water HEX without Sea water pump Connection: 2.5" hose barb connection (inlet), 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange (outlet)
- Keel Connections: 76.2 mm (3in) ID Standard 4 Bolt ANSI Flange Connection
- SCAC and JW shunt tanks for maintaining proper Pump inlet pressures
Exhaust System
- Water-cooled exhaust manifold & turbocharger
- 4 Bolt 130 mm (5.12 in) diameter flanged outlet
Flywheels & Flywheel Housings
- Flywheel Housing, SAE No. 0
- Flywheel, 18 inch, 136 teeth
- SAE standard rotation
Fuel System
- Duplex Fuel Filters, Spin-on, RH service
- Fuel connections size: Supply JIC 37 Deg -10 (7/8-14), Return JIC 37 Deg -8 (3/4-16)
- Plate-type fuel cooler installed behind Aftercooler Shunt Tank
- Fuel transfer pump, gear driven
- Manual fuel priming pump
Generators And Generator Attachments
- SR5 form wound
- 2 roller bearings
- Permanent magnet excitation
- 4 pole, 6 leads, Series Star connected
- Caterpillar's Digital Voltage Regulator (CDVR)
- Marine Class H insulation, Class F temperature rise
- Surface mounted platinum (PT100) 3-wire RTDs, 2 per phase on stator and one each on support bearings
- Anti-condensation space heaters (2 elements - 240 VAC, 1000 Watts
- IP23 Protection suitable for use with Fixed Water Based Local Application Fire Fighting Systems (FWBLAFFS)
- System IV insulation for harsh environment protection
Lube System
- Simplex oil filters, RH service
- Deep sump oil pan
- RH service oil filler locations
- RH service dipstick
- Oil pump, gear driven
Mounting System
- Formed C-channel rails, 300mm (11.81in) height
- Six shipped loose combined helical spring/rubber
- isolators for installation below package base
General
- Front Damper guard
- Common electrical bondng point on HEX and KEEL cooled engines

Alarm And Protection
- Remote panels
- MCS Controller
- Power analyzer module
- Oil level, exhaust temperature, air starting pressure, heat exchanger pressure sensors
Exhaust System
- Dry Elbows
- Flexible Fitting
- Flange
- Muffler
- Muffler Spark Arresting
- Rain Cap
Air Inlet System
- Air Inlet Cleaner
- Closed Crankcase Ventilation
- Air inlet adapter
Charging System
- Battery Chargers, Charging Alternators
Control System
- Load Sharing Attachment
Fuel System
- Water Separator
Lube System
- Duplex Oil Filters, Sump Pump
Protection System
- Fuel and Oil Shielding
Starting System
- Electric Starting Motors - Single 24 Volt
- Air Starting Motor
- Dual Starting Motors (Electric and Air)
- Air Start Accessories
- Starting Aids - JW Heaters
- Battery Sets - 24 Volt - Dry