BU115 Utility Broom

Overview
Overall Width
71 in
Sweeping Width
59 in
Height
31 in

Cat® Utility Brooms sweep and collect debris on smooth surfaces in forward or reverse travel. The Utility Broom is recommended for spoil removal during cold planing applications. The Utility Broom can be adjusted for greater bristle down-force in tough applications such as sweeping course material out of a cold planer cut.

Dimensions

Overall Width
71 in
Sweeping Width
59 in
Height
31 in
Length
59 in
Weight
947 lb
Motor Displacement (per rev)
24 in3
Required Hydraulic Flow
30-83 L/min (8-22 gpm)
Optimal Hydraulic Pressure
145-227 bar (2100-3300 psi)
Brush Speed at Maximum Flow
190 rpm
Hopper Capacity
15 ft³
Brush Diameter
26 in
Required Hydraulics
Standard Flow
Gutter Brush Weight
88 lb
Drive Method
Direct Drive
Overall Width
71 in
Brush Diameter
26 in
Height
31 in
Length
59 in
Motor Displacement
24 in³
Optimal Hydraulic Pressure
145-227 bar (2100-3300 psi)
Required Hydraulic Flow
30-83 L/min (8-22 gpm)
Weight
947 lb
Drive Method
Direct Drive
Required Hydraulics
Standard Flow

Application

Ideal for cleaning and removing dirt, rock, snow and other debris from streets, parking lots, driveways, sidewalks and factory floors.

Ideal for cleaning and removing dirt, rock, snow and other debris from streets, parking lots, driveways, sidewalks and factory floors.

Bi-Directional Sweeping

Utility Brooms have the ability to sweep and collect light debris on smooth surfaces in both forward or reverse.

Utility Brooms have the ability to sweep and collect light debris on smooth surfaces in both forward or reverse.

Large Hopper Capacity

Large hopper capacity allows greater productivity with longer sweeping cycles. Wide bucket opening with bolt-on, replaceable cutting edge permits fast, efficient dumping.

Large hopper capacity allows greater productivity with longer sweeping cycles. Wide bucket opening with bolt-on, replaceable cutting edge permits fast, efficient dumping.

Rubber Boots

Rubber boots on front and sides of broom aid in containing debris and airborne contaminants during sweeping.

Rubber boots on front and sides of broom aid in containing debris and airborne contaminants during sweeping.

Broom Material Options

Standard broom material is made of replaceable polypropylene and steel wire sections. Optional replacement brushes include all polypropylene and all steel wire.

Standard broom material is made of replaceable polypropylene and steel wire sections. Optional replacement brushes include all polypropylene and all steel wire.

Optional Dust Control

An optional water sprinkler kit is available which helps reduce the amount of airborne dust during your sweeping operations.

An optional water sprinkler kit is available which helps reduce the amount of airborne dust during your sweeping operations.

×