Vista exterior
Motor
- Potencia bruta máxima
- 48 CV
- Modelo de motor
- Cat C1.7*
- Net Power @ 2,200 rpm - SAE J1349:2011
- 45 CV
- Net Power @ 2,200 rpm - ISO 9249:2007
- 45 CV
- Taladro
- 3 en
- Ictus
- 4 en
- Desplazamiento
- 104 in²
- Nota (1)
- La potencia anunciada se prueba según la norma especificada vigente en el momento de la fabricación.
- Nota (2)
- Net power advertised is the power available at the flywheel.
- Nota
- *Engine meets U.S. EPA Tier 4 Final emission standards.
Pesas
- Peso operativo
- 9,200 lb
Cubos
- Capacidades de los cubos
- 0.6-1.0 m3 (0.8-1.3 yd3)
- Capacidades de los cazos - Uso general
- 0,6 m3 (0,8 yd3)
- Capacidades de los cubos - Material ligero
- 1.0 m3 (1.3 yd3)
Transmisión
- Velocidad de desplazamiento
- 12 millas/h
Sistema hidráulico
- Main Relief
- 3.336 psi
- 3rd Auxiliary Flow
- 14 gpm
- Hydraulic Cycle Time - Lift
- 5 s
- Hydraulic Cycle Time - Dump
- 1 s
- Hydraulic Cycle Time - Lower, Float
- 2 s
Cabina
- ROPS
- ISO 3471:2008
- FOPS
- ISO 3449:2005 Nivel I
Capacidades de recarga de servicio
- Sistema de refrigeración
- 3 galones (US)
- Depósito de combustible
- 11 galones (US)
- Sistema hidráulico
- 6 galones (US)
- Aceite de motor
- 2 galones (US)
Dimensiones (aproximadas) - Elevador estándar
- Altura de la cabina
- 8 pies
- Distancia al suelo
- 10 en
- Distancia entre ejes
- 6 pies
- Overall Length - With Bucket*
- 15 pies
- Reach at Maximum Dump Height*
- 2 pies
- Profundidad de excavación
- 5 en
- Maximum Dump Height*
- 8 pies
- Load Over Height
- 9 pies
- Hinge Pin at Maximum Height
- 10 pies
- Departure Angle - Degrees
- 30°
- Overall Length - With Forks
- 17 pies
- Reach - Ground Level
- 3 pies
- Alcance máximo
- 4 pies
- Fork Depth Above Ground
- 3 en
- Fork Height at Maximum Reach
- 5 pies
- Maximum Fork Height
- 10 pies
- Fork Reach at Maximum Height
- 2 pies
- Turning Radius - Over Bucket*
- 13 pies
- Turning Radius - Inside Tire**
- 6 pies
- Width - Over Bucket*
- 6 pies
- Tire Gauge
- 4 pies
- Machine Width**
- 6 pies
- Ángulo de articulación
- 40°
- Ángulo de dirección
- 80°
- Dump Angle at Maximum Height
- 40°
- Nota (1)
- *Vary with bucket size.
- Nota (2)
- **Vary with tire size.
- Nota (3)
- Dimensions listed are based on a machine configured with cab, air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Dimensiones (aproximadas) - Elevación alta
- Altura de la cabina
- 8 pies
- Distancia al suelo
- 10 en
- Distancia entre ejes
- 6 pies
- Overall Length - With Bucket*
- 16 pies
- Reach at Maximum Dump Height*
- 2 pies
- Profundidad de excavación
- 6 en
- Maximum Dump Height*
- 8 pies
- Load Over Height
- 10 pies
- Hinge Pin at Maximum Height
- 11 pies
- Departure Angle - Degrees
- 30°
- Overall Length - With Forks
- 17 pies
- Reach - Ground Level
- 3 pies
- Alcance máximo
- 5 pies
- Fork Depth Above Ground
- 2 en
- Fork Height at Maximum Reach
- 5 pies
- Maximum Fork Height
- 10 pies
- Fork Reach at Maximum Height
- 2 pies
- Turning Radius - Over Bucket*
- 13 pies
- Turning Radius - Inside Tire**
- 6 pies
- Width - Over Bucket*
- 6 pies
- Tire Gauge
- 4 pies
- Machine Width**
- 6 pies
- Ángulo de articulación
- 40°
- Ángulo de dirección
- 80°
- Dump Angle at Maximum Height
- 40°
- Nota (1)
- *Vary with bucket size.
- Nota (2)
- **Vary with tire size.
- Nota (3)
- Dimensions listed are based on a machine configured with cab, air conditioning, remote quick coupler, general purpose bucket or 1067 mm (42 in) forks, 75 kg (165 lb) operator, 33 × 15.5-16.5, 12 PR tires, without ride control, without precleaner.
Operating Specifications - Standard Lift
- Tamaño del neumático
- 33 × 15.5-16.5, 12 PR
- Capacidad nominal de la cuchara
- 1 yd³
- Fuerza de arranque
- 6,294 lbf
- Peso operativo
- 9,200 lb
- Rated Operating Load at Full Turn - Bucket***
- 2.756 libras
- Straight Tipping Load - Bucket***
- 6,415 lb
- Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
- 5,516 lb
- Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
- 5,626 lb
- Rack Back - Transport Position
- 51°
- Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
- 3,393 lb
- Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
- 2,544 lb
- Nota (1)
- *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
- Nota (2)
- **Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
- Nota (3)
- ***Manual quick coupler, precleaner hood.
- Nota (4)
- Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
Operating Specifications - High Lift
- Tamaño del neumático
- 33 × 15.5-16.5, 12 PR
- Capacidad nominal de la cuchara
- 1 yd³
- Fuerza de arranque
- 6,519 lbf
- Peso operativo
- 9,231 lb
- Rated Operating Load at Full Turn - Bucket***
- 2.553 libras
- Straight Tipping Load - Bucket***
- 5,975 lb
- Full Turn Static Tipping Load - Bucket (ISO 14397-1*)***
- 5,108 lb
- Full Turn Static Tipping Load - Bucket (Rigid Tire**)***
- 5,238 lb
- Rack Back - Transport Position
- 51°
- Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Firm and Level Ground, 500 mm [20 in] Load Center) (80% FTSTL)***
- 3.175 libras
- Rated Operating Load at Full Turn - Forks (EN 474-3:2006, Rough Terrain, 500 mm [20 in] Load Center) (60% FTSTL)***
- 2.381 libras
- Nota (1)
- *Full compliance to ISO 14397-1 (2007) Sections 1 thru 6, which requires 2% verification be-tween calculation and testing.
- Nota (2)
- **Compliance to ISO 14397-1 (2007) Sections 1 thru 5.
- Nota (3)
- ***Manual quick coupler, precleaner hood.
- Nota (4)
- Operating specifications shown are based on machine equipped with enclosed ROPS cab with air conditioning, remote quick coupler, 75 kg (165 lb) operator and general purpose bucket (GP), without ride control, without precleaner unless otherwise noted.
Maximum Material Densities - General Purpose
- Bucket Type
- Uso general
- Capacidad nominal
- 1 yd³
- Dump Height
- 93 en
- Maximum Material Density
- 3,169 lb/yd³
- Bucket Width
- 70 en
- Nota
- Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
Maximum Material Densities - Light Material
- Bucket Type
- Light Material
- Capacidad nominal
- 1 yd³
- Dump Height
- 88 en
- Maximum Material Density
- 1,989 lb/yd³
- Bucket Width
- 74 en
- Nota
- Based on ISO 7546:1983 and rated operating loads at full turn and standard linkage.
Niveles sonoros
- Interior Sound
- 80.8 dB(A)
- Exterior Sound
- 99.8 dB(A)
Sostenibilidad
- Reciclabilidad
- 95%
Trabajo fácil
The 903 makes work easy with a 17% increase in horsepower with the all-new Cat C1.7 engine. This provides for improved performance when operating on grades and when using drive, steer, and lift simultaneously. The all-new optional hydraulic skid steer loader style coupler allows for faster and more efficient work tool changes while providing a viewing window that enables the operator to see the fork tips when using compact wheel loader style forks. Optional front and rear diff-lock can be activated on the fly, providing maximum traction in slick underfoot conditions.
Confort durante todo el día
Operators will enjoy all day comfort with a multi-function joystick, spacious leg room, ergonomic pedal positioning, easy entry/exit, and optional speed sensitive ride control. The all-new seat provides optimal comfort, while featuring yellow adjustment touch points that make finding that perfect seat position easy. The minimal engine overhang provides excellent rear and corner visibility, making the 903 easy to operate in confined areas.
Configured for Success
Configure the 903 for success with new options such as engine and ground speed control, ideally suited for hydro-mechanical work such as using a broom. With the addition of a work tool electrical harness option, you can now run more tools than ever before. Two loader linkage options, standard and high lift, provide either improved capacity or improved lift height based on your application.
Simply Reliable
Fully opening rear hood allows easy access to the engine compartment featuring side-by-side coolers and transparent fuel/water separator with optional engine air pre-cleaner and radiator screen for high debris applications. Rear tie down locations under the machine allow for easy transport, while the service locations under the hood provide easy access for daily maintenance.
-
Tren de potencia
- Air cleaner, two stage with visual indicator
- Cat C.7 engine:
– Meets U.S. EPA Tier 4 Final emission standards - Respiradero de circuito cerrado
- Cold start plugs
- Electrical fuel priming pump
- Eco drain, engine oil
- Extended life coolant protects to –37° C (–34° F)
- Frame mounted heavy duty axles with outboard planetary reduction
- Maintenance free, sealed for life, prop shaft and universal joints
- Transmission, 20 km/h (12.4 mph)
-
Eléctrico
- 12 volt direct electric starting
- Alternator, 70A
- Interruptor de desconexión de la batería
- Cab mounted fuse panel
- Ignition key start/stop switch
- Maintenance free, sealed for life, 650 CCA heavy duty battery
-
Entorno del operador
- Portavasos
- Digital service hour meter
- Engine coolant temperature gauge
- Fuel level gauge
- Heavy duty, easy clean floor mat
- Operator warning system indicators:
– DPF monitor
– Parking brake applied
– Hydraulic oil temperature
– Engine oil pressure
– Service brake pressure
– Hydraulic filter bypass - Seat:
– Static, vinyl with 51 mm (2 in) retractable seat belt - Two external mirrors – knock back
-
Otros equipamientos de serie
- 3rd valve auxiliary hydraulics with continuous flow detent, standard flow
- Engine enclosure – lockable
- Guarded front headlight
- Hydraulic auxiliary lines with quick disconnects
- Indicador del nivel de aceite hidráulico
- Lift arm safety brace
- Loader arm float function
- Lockable fuel filler cap
- Manual quick coupler, skid steer loader compatible
- Parking brake (secondary brake)
- Product Link™, PL243
- Quick release fuel filter/water separator
- Reversing light
- Self-canceling direction indicators
- Work tool return to dig
- Z-bar linkage
-
Equipamiento opcional
- Air conditioning/heater
- Alternator, 90 amp for air conditioning
- Antifreeze/coolant, extended life, protects to –50° C (–58° F)
- Faro listo
- Cab:
– Open
– Enclosed - Differential lock, front and rear axles
- Hydraulic quick coupler, skid steer loader compatible
- Engine air precleaner
- Engine block heater 120V (dealer installed)
- Engine Speed Control (Throttle Lock)
- Fenders:
– Rear only
– Front and rear - Ground Speed Control (Creeper Control)
- Linkage:
– Standard lift
– High lift - Radiator debris screen
- Radio Ready or AM/FM radio
- Control de conducción
- Seats:
– Mechanical suspension, vinyl with 51 mm (2 in) seat belt
– Mechanical suspension, vinyl with 75 mm (3 in) seat belt
– Mechanical suspension, fabric with 51 mm (2 in) seat belt
– Mechanical suspension, fabric with 75 mm (3 in) seat belt - Tires:
– 12-16.5 10PR
– Flotation 33-15.5 × 16.5
– Flexport™ 33 × 6 × 11 - Working lights, front and rear:
– Halogen
– LED - Arnés eléctrico para herramientas de trabajo
-
Herramientas de trabajo
- For all work tool options, consult your Cat dealer.