DG230-2 (3 phase)

Voltage	120 / 208, 120 / 240, 277 / 480, 346 / 600 VAC
Frequency	60 Hz
Natural Gas Rating	230 eKW
Speed	1800 rpm
Emissions/Fuel Strategy	U.S. EPA Certified for Non-Emergency Application
Engine Model	14.2 L Spark - Ignited

Request a Quote Download Brochure

Generator Set Specifications

Voltage	120 / 208, 120 / 240, 277 / 480, 346 / 600 VAC
Frequency	60 Hz
Natural Gas Rating	230 eKW
Speed	1800 rpm
Emissions/Fuel Strategy	U.S. EPA Certified for Non-Emergency Application

Engine Specifications

Engine Model	14.2 L Spark - Ignited
Fuel Type	Natural Gas
Displacement	865
Displacement	14
Fuel System	Natural Gas
Compression Ratio	9.5:1
Compression Ratio	Turbocharged - Aftercooled
Engine Model	135
Fuel System	5
Governor Type	Electronic
Aspiration	Turbocharged - Aftercooled
Bore	1,463 mm
Stroke	1,728 mm

Gas Generator Sets Specification

Displacement

NaN in³

Generator Set Dimensions

Width	58 in
Height	68 in
Weight	6,364 lb
Length	2,887 kg

Engine

Four-stroke-cycle gas engine combines consistent performance and excellent fuel economy with minimum weight

Generator

Matched to the performance and output characteristics of Cat engines
Industry leading mechanical and electrical design
Industry leading motor starting capabilities
High Efficiency

Cat EMCP Control Panel+17:21

The EMCP controller features the reliability and durability you have come to expect from your Cat equipment. EMCP4 is a scalable control platform designed to ensure reliable generator set operation, providing extensive information about power output and engine operation. EMCP4 systems can be further customized to meet your needs through programming and expansion modules.

Design Criteria

The generator set facilitates compliance with NFPA 110 and meets ISO 8528-5 requirements for transient response
Cooling system designed to operate in 50˚C/122˚F ambient temperatures with an air flow restriction of 0.5 in. water

UL 2200 / CSA - Optional

UL 2200 listed packages
CSA Certified
Certain restrictions may apply.
Consult with your Cat® Dealer.

Worldwide Product Support

Cat dealers provide extensive post-sale support including maintenance and repair agreements. Cat dealers have over 1,800 dealer branch stores operating in 200 countries.

Cooling
- Factory-installed radiator
- Closed coolant recovery system
- 50/50 Ethylene glycol antifreeze
- Radiator and cooling fan complete with protective guards
- Standard ambient temperatures up to 50°C (122°F)
Air Inlet
- Single element air filter
Fuel
- Low fuel pressure switch
- Primary and secondary fuel shut-off
- Fuel pressure test po
- Dual lock off valves
- Natural Gas or LP Vapor
- NPT connection
Generator
- Class H insulation material
- Full load capacity alternator
- Permanent magnet excitation
- Class H insulation material
- Full load capacity alternator
- Integrated Voltage Regulator
- Matched to the performance and output characteristics of Cat engines
- Permanent magnet excitation
- IP23 Protection
Exhaust
- Exhaust outlet with 3” pipe
Controls
- EMCP 4.2 Series generator set controller
Mounting
- Vibration isolaton (puck type)
- Rubber vibration isolators
Electric Power - Package Serial Number Prefix
- Battery charging alternator
Electric Starting And/or Prelube
- Battery cables
- Engine electrical system
- Solenoid activated starter motor
- Solenoid activated starter motor
Governor
- Electronic governor (non adjustable)
Control Panel
- EMCP 4.2 Series generator set controller
Starting/charging
- Batteries with rack and cables
- 12 volt starting motor

Starting/charging
- Battery heater
- Charging alternator
- Jacket water heater
- Battery charger – UL Listed 10 amp
General
- Suitable for Use as Service Equipment (SUSE)
- Automatic transfer switches (ATS)
- CSA Certification
- Enclosures: sound attenuated, weather protective
- UL 2200 package
Generator
- Anti-condensation heater
- Shunt trip and auxiliary contact breaker
- Thermal magnetic or electronic trip MCCBs
- Excitation: [ ] Permanent Magnet Excited (PM)
- Anti-condensation heater
- Oversize and premium generators