C7.1 (Electronic)

C7.1 (Electronic)

Length 43 in
Power Range 109 - 218 bkW
Configuration In-line 6, 4-stroke-cycle diesel
Height 35 in
Minimum Width 31 in
Emissions U.S. EPA Tier 3, IMO II, EU Stage V, China II
Request a Quote Download Brochure
Dimensions & Weights
Length 43 in
Height 35 in
Minimum Width 31 in
Maximum Width 34 in
Minimum Engine Dry Weight 1,609 lb
Maximum Engine Dry Weight 1,676 lb
Maximum Height 35 in
Width 34 in
Engine Dry Weight - Approximate 1,676
Power Rating
Power Range 109 - 218 bkW
Engine Specifications
Configuration In-line 6, 4-stroke-cycle diesel
Emissions U.S. EPA Tier 3, IMO II, EU Stage V, China II
Rated Engine Speed 1500/1800, 600 - 2400 rpm
Bore 4 in
Stroke 5 in
Displacement 428 in³
Aspiration Turbocharged - Aftercooled
Governor Electronic (A5E2 V2 ECM)
Refill Capacity Lube Oil System w/Oil filter change: 20 L (5.3 gal)
Oil Change Interval 500 hours
Cooling Heat exchanger or keel cooled
Flywheel Housing SAE No. 03 with SAE 11.5 in flywheel
Rotation Counterclockwise
Generator Set Specifications
Frequency 50 / 60

Reliability & Durability

Superior response time and acceleration; 12V or 24V electrical system; Gear driven jacket water pump and sea water pump for superior reliability; Maintenance free valve train with hydraulic valve lash adjusters

Easy to use

Compatible with Cat® displays and electronics; Self priming fuel system ensures a smooth start every time

Environment friendly

No visible smoke; Common rail fuel system enables optimum combustion and low emissions; Reduced combustion noise through advanced electronic control; Closed crankcase ventilation system improves engine room cleanliness

  • Cooling System
    • Gear driven jacket water pump
    • Corrosion resistant sea water aftercooler
    • Fuel cooler
  • Exhaust System
    • Watercooled turbocharger and exhaust manifold
  • Fuel System
    • Common rail fuel system
    • Electric fuel priming pump
  • General
    • Vibration damper and guard
    • Self-tensioning multi-vee belt drive
  • Lube System
    • Closed crankcase ventilation system
    • Integral engine oil cooler
  • Mounting System
    • Front and rear engine mounting brackets
  • Starting System
    • Starter motors - 12V or 24V
  • Air Inlet System
    • Various 6" water cooled exhaust elbow configurations
  • Cooling System
    • Engine mounted bilge pumps and auxiliary water pumps with electromagnetic clutch
    • Tube and bundle jacket water heat exchanger and gear-driven sea water pump (rubber impeller)
    • Jacket water heater
    • Cabin heater (calorifier) connections
  • Fuel System
    • SOLAS double wall high pressure fuel lines kit
  • Lube System
    • Left-hand and right-hand oil dipsticks
    • Transmission gear oil cooler (engine mounted)
  • Protection System
    • Additional engine and transmission sensor packages for on or off vessel monitoring
  • Starting System
    • Engine mounted secondary alternator - 24V 100 amp or 12V 175 amp
    • Glow plugs
×