3606 Generator Set (Medium Speed)

3606 Generator Set (Medium Speed)

Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Minimum Rating 1650 ekW
Request a Quote Download Brochure
Engine Specifications
Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Engine Model 3606 I-6,4-Stroke Water-Cooled Diesel
Total Displacement 6,762 in³
Compression Ratio 13:01
Governor Type Generator Set Monitoring System (GMS)
Aspiration TA
Fuel System Direct unit injection
Bore 11 in
Displacement 111 in³
Stroke 12 in
Fuel System 6,762 in³
Generator Set Specifications
Minimum Rating 1650 ekW
Maximum Rating 2000 ekW
Frequency 60 Hz
Speed 900 rpm
Emissions/Fuel Strategy Low Fuel Consumption
Duty Cycle Standby, Prime, Continuous
Generator Set Dimensions
Height - Maximum 157 in
Length - Maximum 404 in
Width - Maximum 100 in
Dry Weight - Genset (maximum) 74,970 lb

Cat Diesel Engine

SR5 Alternator

World Wide Product Support

Full Range of Attachments

  • Air Inlet System
    • Breather, crankcase, top-mounted
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Turbocharger, watercooled (720 rpm and HFO), engine oil lubricated
    • Air inlet shutoff
  • Cooling System
    • Jacket water thermostats
    • Engine coolant water drains
    • Water temperature regulator
  • Exhaust System
    • 457 mm (18 in) Cat bolt pattern
    • Includes adapter, flexible exhaust fitting
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Centrifugal oil filters with single shutoff
    • Oil pressure regulating valve
    • Service side engine mounted on cylinder block inspection covers
    • Oil filler and dipstick
    • Crankcase explosion relief valves
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
  • Mounting System
    • Damper, torsional vibration
    • Engine and generator mounting
  • Starting / Charging System
    • Vane type air starter
    • One motor, engine mounted at rear, on left side
    • Air silencer
    • Line group for single point custom connection
  • General:
    • Paint, Caterpillar yellow
    • Gear driven pumps: Fuel/oil/jacket water/aftercooler/Oil cooler water
  • Air Inlet System
    • Air inlet adapter
    • Air cleaner
    • Vertical support bracket
    • Heavy duty air cleaner
    • Boost control valve
    • Air cleaner louver assembly
    • Soot filter
  • Cooling System
    • Heating aids
    • Cooling system aids
    • Expansion tank
    • Auxiliary water pump
  • Exhaust System
    • Weld flange and related hardware
    • Flexible exhaust fittings
  • Fuel System
    • Duplex primary fuel strainer
    • Fuel priming pump
    • Fuel system connections
  • Generator System
    • Class F insulation
    • 3 Phase, six Leads, WYE
    • Busbar connections
    • Anti-condensation space heaters
    • Winding temperature detectors
  • Governor System
    • EGB actuator
    • 723 Plus
    • Electronic/actuators
    • Battery backup/power supply
    • Digital programmers
    • 2301 A load share
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Vertically restrained
    • Isolator
    • Spring type vibration isolators
    • Non-vertically restrained
  • Starting / Charging System
    • Compressed air flex hose
    • Pressure reducing valve
  • General:
    • Custom paint colors
×