3608 Generator Set (Medium Speed)

3608 Generator Set (Medium Speed)

Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Minimum Rating 2363 kVA
Request a Quote Download Brochure
Engine Specifications
Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Engine Model 3608 I-8,4-Stroke Water-Cooled Diesel
Total Displacement 9,064 in³
Compression Ratio 13:01
Governor Type Generator Set Monitoring System (GMS)
Aspiration TA
Fuel System Direct unit injection
Bore 11 in
Displacement 9,064 in³
Stroke 12 in
Fuel System 9,064 in³
Generator Set Specifications
Minimum Rating 2363 kVA
Maximum Rating 3575 kVA
Frequency 50 Hz
Speed 750 & 1000 rpm
Emissions/Fuel Strategy Low Fuel Consumption
Duty Cycle Standby, Prime, Continuous
Generator Set Dimensions
Height - Maximum 157 in
Length - Maximum 404 in
Dry Weight - Genset (maximum) 91,050 lb
Width - Maximum 100 in

Cat Diesel Engine

Generator

Worldwide Product Support

Full Range of Attachments

  • Air Inlet System
    • Breather, crankcase, top-mounted
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Turbocharger, watercooled (750 rpm and HFO), engine oil lubricated
    • Air inlet shutoff
  • Cooling System
    • Water temperature regulator
    • Jacket water thermostats
    • Engine coolant water drains
  • Exhaust System
    • 457 mm (18 in) Cat bolt pattern
    • Includes adapter, flexible exhaust fitting
    • Dry, gas tight, exhaust manifold
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Service side engine mounted on cylinder block inspection covers
    • Centrifugal oil filters with single shutoff
    • Crankcase explosion relief valves
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Oil filler and dipstick
    • Oil pressure regulating valve
  • Mounting System
    • Engine and generator mounting
    • Damper, torsional vibration
  • Starting / Charging System
    • Line group for single point custom connection
    • Air silencer
    • One motor, engine mounted at rear, on left side
    • Vane type air starter
  • General:
    • Paint, Caterpillar yellow
    • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
  • Air Inlet System
    • Air cleaner louver assembly
    • Air inlet adapter
    • Heavy duty air cleaner
    • Vertical support bracket
    • Soot filter
    • Boost control valve
  • Cooling System
    • Expansion tank
    • Auxiliary water pump
    • Heating aids
    • Cooling system aids
  • Exhaust System
    • Flexible exhaust fittings
    • Weld flange and related hardware
  • Fuel System
    • Duplex primary fuel strainer
    • Fuel priming pump
    • Fuel system connections
  • Generator System
    • Winding temperature detectors
    • Anti-condensation space heaters
    • Busbar connections
    • 3 Phase, six Leads, WYE
    • Class F insulation
  • Governor System
    • Digital programmers
    • 2301 A load share
    • 723 Plus
    • EGB actuator
    • Electronic/actuators
    • Battery backup/power supply
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Spring type vibration isolators
    • Non-vertically restrained
    • Vertically restrained
    • Isolator
  • Starting / Charging System
    • Pressure reducing valve
    • Compressed air flex hose
  • General:
    • Custom paint colors
×