3612 Generator Set (Medium Speed)

3612 Generator Set (Medium Speed)

Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Minimum Rating 4400 kVA
Request a Quote Download Brochure
Engine Specifications
Bore 11 in
Displacement 1,127 in3
Stroke 12 in
Aspiration TA
Fuel System Direct unit injection
Engine Model 3612 V-12,4-Stroke Water-Cooled Diesel
Total Displacement 13,524 in³
Compression Ratio 13:01
Governor Type Generator Set Monitoring System (GMS)
Aspiration TA
Fuel System Direct unit injection
Bore 11 in
Displacement 13,524 in³
Stroke 12 in
Fuel System 13,524 in³
Generator Set Specifications
Minimum Rating 4400 kVA
Maximum Rating 4850 kVA
Frequency 50 Hz
Speed 750 & 1000 rpm
Emissions/Fuel Strategy Low Fuel Consumption
Duty Cycle Prime, Continuous
Generator Set Dimensions
Length - Maximum 404 in
Width - Maximum 100 in
Height - Maximum 157 in
Dry Weight - Genset (maximum) 112,690 lb

Cat Diesel Engine

Generator

Worldwide Product Support

Full Range of Attachments

  • Air Inlet System
    • Air cleaner
    • Turbocharger, watercooled, engine oil lubricated
    • Breather, crankcase, top-mounted
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Air inlet shutoff
  • Cooling System
    • Water temperature regulator
    • Engine coolant water drains
    • Jacket water thermostats
    • Front mounted turbos
    • Three-bundle oil cooler
  • Exhaust System
    • Dry, gas tight, exhaust manifold
    • 457 mm (18 in) Cat bolt pattern
    • Includes adapter, flexible exhaust fitting
  • Fuel System
    • Simplex or duplex
  • Generator System
    • Custom generator per generator data sheet completed by dealer
  • Governor System
    • UG Actuator
  • Lube System
    • Centrifugal oil filters with single shutoff
    • Oil filler and dipstick
    • Crankcase explosion relief valves
    • Oil pressure regulating valve
    • Wet oil sump. Includes engine-driven main lubrication and oil pumps, oil lines and oil pan
    • Service side engine mounted on cylinder block inspection covers
  • Mounting System
    • Damper, torsional vibration
    • Engine and generator mounting
  • Starting / Charging System
    • Line group for single point custom connection
    • Vane type air starter
    • Two motors, engine mounted at rear, on left side
    • Air silencer
  • General:
    • Paint, Caterpillar yellow
    • Gear driven pumps: Fuel/oil/jacket water/Aftercooler/Oil cooler water
  • Air Inlet System
    • Vertical support bracket
    • Soot filter
    • Boost control valve
    • Heavy duty air cleaner
    • Air cleaner louver assembly
    • Air inlet adapter
  • Cooling System
    • Heating aids
    • Auxiliary water pump
    • Expansion tank
    • Heat exchanger for single circuit
    • Cooling system aids
  • Exhaust System
    • Flexible exhaust fittings
    • Weld flange and related hardware
  • Fuel System
    • Duplex primary fuel strainer
    • Fuel system connections
    • Fuel priming pump
  • Generator System
    • Anti-condensation space heaters
    • Class F insulation
    • Busbar connections
    • Winding temperature detectors
    • 3 Phase, six Leads, WYE
  • Governor System
    • 230 UA
    • EGB actuator
    • Digital programmers
    • Electronic/actuators
    • 723 Plus
    • Battery backup/power supply
  • Lube System
    • Oil pan drain valve
    • Lube ANSI adapter (Emergency connection)
  • Mounting System
    • Spring type vibration isolators
    • Vertically restrained
    • Isolator
    • Non-vertically restrained
  • Starting / Charging System
    • Compressed air flex hose
    • Redundant air starters
    • Pressure reducing valve
    • Turbine type air starters
  • General:
    • Custom paint colors
×