C1.1 Generator Set

  • Exterior View
  • Exterior View

C1.1 Generator Set

Bore 3 in
Displacement 69 in3
Stroke 3 in
Fuel System Indirect Injection
Minimum Rating 8.0 ekW
Maximum Rating 8.8 ekW
Engine Specifications
Bore 3 in
Displacement 69 in3
Stroke 3 in
Fuel System Indirect Injection
Engine Model C1.1, In-line 4, 4-cycle diesel
Compression Ratio 23.0:1
Governor Type Mechanical
Fuel System Indirect Injection
Bore 3 in
Displacement 69 in³
Stroke 3 in
Fuel System 3 in
Aspiration Naturally Aspirated
Generator Set Specifications
Minimum Rating 8.0 ekW
Maximum Rating 8.8 ekW
Voltage 110 to 480 Volts
Frequency 60 Hz
Speed 1800 rpm
Emissions/Fuel Strategy EU Stage IIIA
Duty Cycle Standby, Prime
Standby Rating 8.8 ekW
Prime Power Rating 8 ekW
Generator Set Dimensions
Height - Maximum 39 in
Length - Maximum 55 in
Width - Maximum 24 in

Cat Generator Set Package

        

  • Cat generator set packages have been fully prototype tested
  •     

  • Conform to ISO 8528-5 steady state and transient response requirements

Cat Diesel Engine

        

  • Reliable, rugged, durable design
  •     

  • Field-proven in thousands of applications worldwide
  •     

  • Four-stroke-cycle diesel engine combines consistent performance and excellent fuel economy with minimum weight

Alternator

        

  • Superior motor starting capability minimizes need for oversizing alternator
  •     

  • Designed to match performance and output characteristics of Cat diesel engines
  •     

  • Robust Class H insulation

GCCP 1.3 Control Panel

        

  • User-friendly interface and navigation
  •     

  • Scalable system to meet a wide range of installation requirement
  •     

  • Expansion modules and site-specific programming for specific customer requirements
  •     

  • Image may not be a representative of actual product

Cooling System

        

  • Designed to operate in standard ambient temperatures up to 50°C (122°F)
  •     

  • Contact your Cat Dealer for specific ambient and altitude capabilities

Certifications

Designed to meet applicable global standards including ISO 8528, ISO 3046 and IEC 60034-1, with CE, UKCA and EAC conformity available depending on configuration and market.

One Safe Source

        

  • Components used in the generator set are selected based on seamless design integration to provide the optimum performance
  •     

  • The generator set is fully assembled at a Caterpillar facility following our quality guidelines
  •     

  • Each generator set package is tested before leaving the Caterpillar facility
  •     

  • Cat product support, including dealer service, parts and warranty covers the entire Cat power system

World Wide Product Support

        

  •     
  •     

  • Cat dealers have over 1,800 dealer branch stores operating in 200 countries
  •     

  •     
  •     

  • Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
  • Air Inlet System
    • Light duty air cleaner with disposable element
  • Control Panel
    • GCCP 1.3
  • Cooling System
    • Coolant drain line with valve
    • Caterpillar extended life coolant
    • Radiator and cooling fan with guards
    • Fan drive, battery charging alternator drive
  • Exhaust System
    • Stub pipe, gaskets, raincap & SAE exhaust flange for customer use - shipped loose
  • Fuel System
    • Integral - Dual and Single wall fuel tank
    • Standard open set fuel tank/base supplied
  • Generators And Generator Attachments
    • Automatice Voltage Regulator
  • Governing System
    • Mechanical governing system
  • Lube System
    • Lubricating oil
    • Oil drain line with valve
  • Mounting System
    • Includes lifting provisions and termination points for coolant
    • Captive linear vibration isolators
  • Starting / Charging System
    • Standard Battery
  • General
    • Engine and alternator pre-paint, Caterpillar yellow
  • Telematics
    • Cat® Product Link™ PL444 cellular
  • Alternator Options
    • Coastal insulation protection
  • Certificates
    • European upgrade to STD set for CE certificate
    • Global certification for CIS
  • Circuit Breakers
    • Padlockable breaker device
    • 3-Pole and 4-Pole Circuit breaker
  • Control Panel
    • Battery charger
    • Volt free contacts for genset running
    • Emergency stop with key
  • Cooling System
    • Coolant heater
  • Enclosures
    • Steel and Aluminium
    • Sound attenuated Level 1/ Level 2 / Level 3
  • Fuel System
    • Sub base - Single and Dual wall fuel tanks
    • Base feet
    • Skidbase for enclosures
    • Skidbase for open sets
    • Low fuel level alarm
  • Mounting Options
    • Industrial silencer removal
    • Battery removal
    • Silencer installation kit
  • General
    • Radiator stone guard
    • Packing case - canopied set
    • Packing case - compact set
×