TH53-E60 Transmission
Gross Input Power |
2,500 BHP |
Gross Peak Input Torque |
8,914 ft-lb |
Rated Input Speed |
1,900 r/min |
Gears |
6F/0R |
1F Gear Ratio |
5 |
2F Gear Ratio |
3 |
Transmission Specifications
Gross Input Power |
2,500 BHP |
Gross Peak Input Torque |
8,914 ft-lb |
Rated Input Speed |
1,900 r/min |
Gears |
6F/0R |
1F Gear Ratio |
5 |
2F Gear Ratio |
3 |
3F Gear Ratio |
3 |
4F Gear Ratio |
2 |
5F Gear Ratio |
2 |
6F Gear Ratio |
2 |
-
Cat Engines For Optimized Power Train
- Cat 3512C (HD)
- Cat 3512E (HD)
-
Transmission Rotation
- Input rotation — counterclockwise
- Output rotation — counterclockwise(as viewed from rear)
-
Torque Converter
- Factory installed torque converter
- Series — TC58733-ESLF
- Stall torque ratio — 2.30
-
Clutches
- Clutches — electro-hydraulic fully modulated, oil cooled, multidisc
- Clutch modulation control — Cat Electronic Clutch Pressure Control (ECPC)
-
Installation Connections
-
Oil System
- Cat Transmission/Drive Train Oil-4 (TDTO)
- Oil temperatures continuous - 80°C (195°F)
- Hydraulic Fill Capacity — Approx. 108L (28.5 gal), 104 L (27.5 gal) initial fill; 87 L (23 gal) refill; subject to cooler size, lines, and installation
- Filter Type — 6 micron synthetic, cartridge remote mount
-
Mountings
- Input connection (flywheel) — SAE #0
- Output connections (yoke) - GWB 390.65, GWB 390.60
- Structural application subject to Caterpillar approval
-
Control System
- Electronic Control Unit (ECU)
- Electronic data link, SAE J1939
- Electrical system 24V
-
Power Take-off Drives
- Mounting Type: J704 SAE Bolt, Location: 12 o’clock, Rated Power: 150HP @1900RPM
- Mounting Type: J744 SAE C, Location: 10 o’clock, Rated Power: 150HP @1900RPM
×