Cat C32 Auxiliary / Diesel Electric Propulsion Engine (IMO III)

Cat C32 Auxiliary / Diesel Electric Propulsion Engine (IMO III)

Minimum Rating 352 bhp
Aspiration Turbocharged-aftercooled aspiration
Configuration Vee 12, 4-stroke-cycle diesel
Bore 6 in
Stroke 6 in
Displacement 1,959 cu in
Request a Quote Download Brochure
Power Rating
Minimum Rating 352 bhp
Maximum Rating 1,332 BHP
Minimum Rating 1,047 BHP
Power Range 590 - 994 bkW
Engine Specifications
Aspiration Turbocharged-aftercooled aspiration
Configuration Vee 12, 4-stroke-cycle diesel
Bore 6 in
Stroke 6 in
Displacement 1,959 cu in
Rotation Counterclockwise from flywheel end
Emissions IMO III emissions certified (SCR required)
Rated Engine Speed 1500 rpm
Governor Electronic (A5 ECM)
Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan
Oil Change Interval 750 hrs - deep pan
Cooling Heat exchanger or keel cooled
Flywheel Housing SAE No. 0 with SAE No. 18 flywheel (136 teeth)
Aspiration Turbocharged - Aftercooled
Bore 6 in
Configuration V 12, 4-stroke-cycle diesel
Displacement 1,959 in³
Rotation Counterclockwise
Stroke 6 in
Emissions IMO II, IMO III U.S. EPA T4, EU Stage V, China II
Cooling Heat exchanger or keel cooled
Flywheel Housing SAE No. 0 with SAE No. 18 flywheel (136 teeth)
Governor Electronic (A5 ECM)
Oil Change Interval 750 hours - deep pan
Rated Engine Speed 1500 / 1800 rpm
Refill Capacity Lube Oil System w/ oil filter change: 146 L (38.5 gal) - deep pan
Dimensions & Weights
Minimum Length 84 in
Maximum Length 90 in
Minimum Height 59 in
Maximum Height 64 in
Minimum Width 57 in
Maximum Width 57 in
Minimum Engine Dry Weight 6,950 lb
Maximum Engine Dry Weight 7,160 lb
Maximum Engine Dry Weight 7,160 lb
Maximum Height 64 in
Maximum Length 90 in
Maximum Width 57 in
Minimum Engine Dry Weight 6,950 lb
Minimum Height 59 in
Minimum Length 84 in
Minimum Width 57 in
Clean Emissions Module (CEM) – Dimensions
6 Brick Z-Flow - Length 148 in
6 Brick Z-Flow - Height 24 in
6 Brick Z-Flow - Width 44 in
6 Brick Z-Flow - Weight 1,246 lb
6 Brick U-Flow - Length 85 in
6 Brick U-Flow - Height 24 in
6 Brick U-Flow - Width 57 in
6 Brick U-Flow - Weight 1,235 lb
Dosing Cabinet - Length 37 in
Dosing Cabinet - Height 23 in
Dosing Cabinet - Width 19 in
Dosing Cabinet - Weight 209 lb
Clean Emissions Module (CEM) - Dimensions
6 Brick U-Flow - Height 24 in
6 Brick U-Flow - Length 85 in
6 Brick U-Flow - Weight 1,235 lb
6 Brick U-Flow - Width 57 in
6 Brick Z-Flow - Height 24 in
6 Brick Z-Flow - Length 148 in
6 Brick Z-Flow - Weight 1,246 lb
6 Brick Z-Flow - Width 44 in
Dosing Cabinet - Height 23 in
Dosing Cabinet - Length 37 in
Dosing Cabinet - Weight 209 lb
Dosing Cabinet - Width 19 in
Generator Set Specifications
Frequency 50 / 60

Emissions

Utilizes SCR Technology to enable IMO III emission regulations compliance while lowering operational costs

Control Strategy

Utilizes closed loop air assisted DEF dosing control strategy that delivers: Highest efficiency mixing and control to lower operational costs; Extends emissions useful life; Ensures compliance; Flexible to urea quality

Fuel System

Enhanced control of fuel injection optimized through crank timing and the A5 ECM technology

Power Reserve

Industry leading power reserve

Certifications

Wide range of available Marine Society certifications

Warranty

Industry-leading warranty coverage for factory packaged components

Service

Global dealer network for service in any location

  • Air Inlet System
    • Separate circuit aftercooled (SCAC)
    • Closed crankcase fumes disposal
  • Control System
    • 24V control system
  • Cooling System
    • Heat exchanger or Keel Cooling
    • Watercooled exhaust manifold and turbocharger
    • Hard seawater lines – no flexible hoses
    • Flanges for cooling connections, ANSI or DIN
  • Fuel System
    • Duplex fuel filters with hybrid fuel lines
    • Shipped loose primary fuel filter with water separator
    • Fuel transfer and priming pump
  • Lube System
    • Oil fill, simplex filter and dipstick
    • Deep or shallow sump oil pan
  • Mounting System
    • Adjustable front support mounting system
  • General
    • Right or left hand service sides
    • Customer wiring and service tool connector
  • Alarm And Protection
    • MECP I control panel
    • MECP III control panel with Cat® Alarm and Protection System
  • Exhaust System
    • Water-in-fuel and exhaust temperature sensors
    • Muffler
  • Charging System
    • Charging alternator
  • Fuel System
    • Manual or electric fuel priming pump
    • Fuel cooler
  • Lube System
    • Duplex oil filters
  • Power Take-offs
    • Front drives including stub shaft and pump drive
    • Rear SAE A or B pump drives
  • Starting System
    • Starting motors – air, electric or redundant
×