Cat C280-8 Propulsion Engine

  • Exterior View

Cat C280-8 Propulsion Engine

Power Range 3084-3393 bhp (2300-2530 bkW)
Speed Range 900 rpm
Emissions IMO II
Aspiration TA
Bore 11 in
Stroke 12 in
Power Rating
Power Range 3084-3393 bhp (2300-2530 bkW)
Power Range 3084-4023 bhp (2300-3000 bkW)
Engine Specifications
Speed Range 900 rpm
Emissions IMO II
Aspiration TA
Bore 11 in
Stroke 12 in
Displacement 9,031 in3
Configuration In-line 8, 4-Stroke-Cycle Diesel
Rotation from Flywheel End Counterclockwise or clockwise
Speed Range 900 - 1000 rpm
Emissions IMO II, IMO III/EPA Tier 4
Aspiration TA
Bore 11 in
Stroke 12 in
Displacement 9,031 in³
Application Workboat
Dimensions & Weights
Dry Weight 41,800 lb
Length 195 in
Width 71 in
Height 104 in
Dry Weight 41,800 lb

High Power Density

Continuous Service and Maximum Continuous ratings provide 2,300 to 3,000 bkW at 900 or 1,000 rpm, giving workboat operators a broad power range for demanding commercial propulsion applications.

Extreme Duty Design

Heavy-duty construction and marine-grade electronics are supported by thermal, overspeed, cold-start and emissions testing plus more than 350,000 field hours.

925 Hour Oil Service

A 925-hour oil-change interval, left- or right-hand service access, duplex fuel filters and a duplex centrifugal oil filter help simplify planned maintenance and support uptime.

ADEM IV Engine Controls

Caterpillar ADEM 4 electronic engine control modules manage governing, fuel delivery and engine operating parameters to support consistent operation and onboard monitoring.

Vessel Integration Options

Heat-exchanger or keel-cooled configurations, clockwise or counterclockwise rotation and left- or right-hand service availability help align the engine with vessel requirements.

Emissions Ready Ratings

Available ratings support IMO II or IMO III and U.S. EPA Tier 4 compliance, giving operators options for applicable emissions requirements. Select configurations require the appropriate aftertreatment system.

  • General
    • LH and RH service availability
  • Air Inlet System
    • Aftercooler, fresh water, corrosion resistant coated (air side)
    • Crankcase breathers, top mounted
    • Single turbocharger, rear-mounted, engine oil lubricated
    • Air inlet adapter - Straight / 90 degree / 35 degree
  • Control System
    • Dual Caterpillar ADEM A4 Electronic Engine Control Modules
    • Rigid Wiring Harness
    • Aftercooler/oil cooler and jacket water pumps (gear driven)
  • Cooling System
    • Engine coolant water drains
    • Single Circuit / Separate Circuit Aftercooler
  • Exhaurt System
    • Dry, gas tight, exhaust manifold
  • Exhaust System
    • Turbo speed sensors - overspeed protection
  • Fuel System
    • Fuel transfer pump, gear driven
    • Duplex Fuel filters
    • Electronically Controlled Unit Injectors
  • Instrumentation
    • CAT Alarm & Protection System
  • Lube System
    • Oil pump, gear driven
  • Lube Systems
    • 2 element oil cooler, engine mounted
    • Duplex centrifugal oil filter - engine mounted
    • Prelube pump - air / electric
  • Protection System
    • Crankcase explosion relief valves
  • Exhaust System
    • Exhaust manifold shielding - soft
  • Cooling System
    • Jacket Water Heaters
  • Fuel System
    • SOLAS shielding
  • Lube System
    • Front and rear oil pan drains
    • Wet sump
    • SOLAS shielding
  • Protection System
    • Oil mist detector
    • Cylinder pressure relief valves
    • Cylinder pressure relief valves
×