Rugged, durable design with reliable performance proven in thousands of applications worldwide
Certified alternative fuels including Hydrotreated Vegetable Oil (HVO), Renewable Diesel (RD) and Hydrotreated Renewable Diesel (HRD) which meet EN 15940 or ASTM D975 can be used or blended with EN 590 diesel
Cat Generator Set Package
Accepts 100% block load in one step
Meets NFPA 110 loading requirements
Conforms to ISO 8528-5 G3 load acceptance requirements
Reliability verified through torsional vibration, fuel consumption, oil consumption, transient performance, and endurance testing
Alternators
Superior motor starting capability minimizes need for oversizing generator
Designed to match performance and output characteristics of Cat diesel engines
Cooling System with Radiator
Cooling systems are available to operate in ambient temperatures up to 50°C (122°F)
Tested to ensure proper generator set cooling
Cat® Energy Control System (ECS)
User-friendly interface and navigation
Scalable system to meet a wide range of installation requirements
Expansion modules and site specific programming for specific customer requirements
Graphical touchscreen display
Easily upgradeable
Warranty
24 months/1000-hour warranty for Standby and Mission Critical ratings
12 months/unlimited hour warranty for Prime and Continuous ratings
12 months/unlimited hour warranty for Prime-DCP ratings
Extended service protection is available to provide extended coverage options
Worldwide Product Support
Cat dealers have over 1,800 dealer branch stores operating in 200 countries
Your local Cat dealer provides extensive post-sale support, including maintenance and repair agreements
Financing
Caterpillar offers an array of financial products to help you succeed through financial service excellence
Options include loans, finance lease, operating lease, working capital, and revolving line of credit
Contact your local Cat dealer for availability in your region
Air Inlet
4 x Single element canister air cleaners with service indicator(s).
Control Panel
Engine cycle crank
Oil pressure (psi, kPa or bar)
Digital Indicators
Coolant temperature
Environmental sealed front face
Frequency (Hz)
True RMS AC metering, 3-phase, +/-2% accuracy
Text alarm/event descriptions
Low coolant level
Volts (L-L & L-N)
Auto/start/stop control
Warning/shutdown Indicators:
Emergency stop pushbutton
Engine cool-down timer
DC volts
High coolant temperature
Operating hours
Low oil pressure
Cat ECS 100
Amps (per phase & average)
4 Programmable relay Inputs
Alarm acknowledge
4 Programmable relay output
Failure to start (overcrank)
Overspeed
Lamp test
24 Volt DC operation
Wall mounted controls
RPM
Cooling System
SCAC cooling
Coolant sensors
JW Inlet: 6" ANSI / JW Outlet: 5" Cat Flange
AC Inlet: 6" ANSI / AC Outlet: 3-1/2" ANSI
Exhaust
Dry exhaust manifold
Bolted flange (ANSI 6" & DIN 150) with bellow for each turbo (Qty 4). 50 Hz
Fuel
Filters x 3
Secondary/tertiary fuel filters
4 Micron spin on type
10 Micron spin on type
Engine mounted filters x 3
Primary fuel filter water/fuel water separator
Generators And Attachments
Salient pole
RFI suppression
Anti-condensation space heater
IEC platinum Stator RTDs
Form wound
NEMA Class H insulation
Voltage regulator
Reactive droop capability
Min/max Exciter limiter
3 Phase voltage sensing
Exciter diode monitor
6 Leads
3 Phase brushless
Right side extension box, bottom cable entry
Permanent magnet excitation (PMG)
Class H temperature rise at 40C ambient
Governing System
ADEM A4
Redundant shutdown (Overspeed protection through a duplicate speed sensing system)
Lube System
Oil drain lines and valve
Gear type lube oil pump
Oil filter, filler and dipstick
Integral lube Oil cooler
Lubricating oil
Fumes disposal
Mounting Systems
Rails - Engine/Generator
Rubber anti-vibration mounts - shipped loose
Starting / Charging System
Batteries and battery rack w/cables
Dual 24 volt electric starting motors
Battery disconnect switch
General
SAE standard rotation
Right hand servicing
Paint - Caterpillar yellow with high gloss black rails
Air Inlet Systems
Single element air cleaner
Control Panels
EMCP 4.4
Controller and MV and HV power connection locations
Load share module
Controller voltage and current sensing groups
Speed adjust
Annunciator modules
Customer interface options
Generator temperature monitoring
E-Stop
Interconnect harness
Generator harness
Modbus monitoring of packages
Vandal proof panel door
Cooling System
Package mounted radiators
Remote radiators
Fuel cooler
Crankcase Systems
Explosive relief valves
Crankcase ventilation system
Exhaust System
Front housing - Standby or mission critical
Front housing - Prime or continuous
Exhaust collectors/manifold
Mufflers (15, 25 and 34 dBA)
Fuel System
Primary fuel filter
Generators And Attachments
Medium voltage - 3000 Frames - 50 Hz, 3 phase, 1500 rpm, FW, PM, No of leads=6, Pitch 0.6667
Thermostat for space heater
Generator air cleaner
Differential current transformers - (5, 9 and 15 kV Class)
Instrumentation
Pyrometer and thermocouples
Lube System
Lube oil heater
Lube oil heater with Crankcase explosion relief valves
Drain group oil pans
Lubricating oil
Electric prelube pumps
Oil filters
Mounting System
Rubber anti-vibration mounts
Spring type linear vibration isolators
IBC vibration isolators - Shipped loose
Special Tests / Reports
Generator test report
PGS Test report @ 1.0 power factor
PGS Test report @ 0.8 power factor
Standard genset TVA (Torsional Vibration Analysis) report
Custom generator TVA report
Special test charge - Engine only
Genset fuel consumption test
Standard engine test charge
Starting / Charging System
24 Volt electric starting motor
Air starting motor
Air pressure regulator
Starter location covers
24 Volt battery set - Dry
20, 35 and 50 Amp Battery chargers
Charging alternators - Dry
Jacket water heaters
General
Special paint - 3500, Colors (other than Caterpillar yellow or high performance paints)
Exterior View