| Minimum Rating | 524 bhp |
| Maximum Rating | 670 bhp |
| Emissions | NSPS Site Compliant Capable or Non-regulated |
| Ignition, Protection | ADEM™ A3 |
| Air/Fuel Ratio Control | ADEM™ A3 |
| Minimum Rating | 524 BHP |
| Minimum Rating | 524 bhp |
| Maximum Rating | 670 bhp |
| Emissions | NSPS Site Compliant Capable or Non-regulated |
| Ignition, Protection | ADEM™ A3 |
| Air/Fuel Ratio Control | ADEM™ A3 |
| Minimum Rating | 524 BHP |
| Maximum Rating | 670 BHP |
| Emissions | With Customer supplied Aftertreatment, 2g/bhp-hr NOx |
| Displacement | 2,105 in³ |
| Length | 96 in |
| Width | 70 in |
| Height | 76 in |
| Weight - Dry | 11,950 lb |
| Rated Speed | 1,400 rpm |
Meets U.S. EPA Spark Ignited Stationary NSPS Emissions for 2007/8
ADEM A3 control system providing integrated ignition, speed governing, protection, and controls, including detonation-sensitive variable ignition timing. ADEM A3 has improved: user interface, display system, shutdown controls, and system diagnostics.
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion reducing the combustion temperature and pressure, greatly reducing levels of NOx. Lean-burn design also provides longer component life and excellent fuel consumption.
Side covers on block allow for inspection of internal components
Large variety of factory-installed engine attachments reduces packaging time
Every engine is full-load tested to ensure proper engine performance
GERP is a web-based program designed to provide site performance capabilities for Cat® natural gas engines for the gas compression industry. GERP provides engine data for your site's altitude, ambient temperature, fuel, engine coolant heat rejection, performance data, installation drawings, spec sheets, and pump curves.
More than 2,200 dealer outlets Cat factory-trained dealer technicians service every aspect of your petroleum engine Cat parts and labor warranty Preventive maintenance agreements available for repairbefore-failure options S•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine: - Internal engine component condition - Presence of unwanted fluids - Presence of combustion by-products - Site-specific oil change interval
Over 60 years of natural gas engine production Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products. - Cast engine blocks, heads, cylinder liners, and flywheel housings - Machine critical components - Assemble complete engine
For all your petroleum power requirements, visit www.cat.com/oilandgas.
