Cat C4.4 Diesel Engine

Exterior View

Maximum Power	200 hp
Maximum Torque	609 lb-ft @ 1400 rpm
Rated Speed	2200 rpm
Minimum Power	109 hp
Emissions	U.S. EPA & CARB Tier 4 Final, EU Stage V
Engine Configuration	Inline 4, 4-Stroke-Cycle Diesel

Request a Quote Download Brochure

Power Rating

Maximum Power	200 hp
Maximum Torque	609 lb-ft @ 1400 rpm
Rated Speed	2200 rpm
Minimum Power	109 hp

Emission Standards

Emissions

U.S. EPA & CARB Tier 4 Final, EU Stage V

General

Engine Configuration	Inline 4, 4-Stroke-Cycle Diesel
Bore	4 in
Stroke	5 in
Displacement	269 in³
Compression Ratio	16.5:1
Aspiration	Turbocharged Aftercooled (TA) or Series Turbocharged Aftercooled (TTA)
Combustion System	Direct Injection
Rotation from Flywheel End	Counterclockwise
Aftertreatment	DOC+DPF+SCR

Engine Dimensions - Approximate

Length	32 in
Width	30 in
Height	35 in
Weight - Net Dry - Basic Operating Engine Without Optional Attachments	1,180 lb

Aftertreatment Dimensions

Length	27 in
Width	25 in
Height	18 in
Weight	143 lb

Installation

A modular and compact core on the Cat C4.4 makes installing the engine on any number of machine applications a relative breeze. And when downsizing from five-liter platforms, OEMs can see a 20% reduction in length, 5% reduction in height and 40% reduction in weight of the engine, significantly reducing installation costs.

Advanced Features

With a 15% increase in power density and 10% increase in torque when compared to its predecessor engine, the compact design of the Cat C4.4 reduces heat loss for more efficient engine output, so operators can conquer even the toughest tasks with relative ease.

Ideal Applications

Industrial, agricultural and construction applications such as: Pumps • Compressors • Chippers • Grinders • Asphalt paving equipment • Hydraulic power units • Bore rigs • Drill rigs • Tractors.

Total Cost of Ownership

There's a lot that can affect the lifetime cost of ownership on your engine. It can be as simple as fluid intake and as complex as weight distribution. Either way, the Cat C4.4 has it covered. When compared to similar 6-cylinder plaforms, the C4.4 saves more than 18% in fluid consumption and is specially balanced to be its most effective, every day.

Cat Dealer Product Support

The Cat C4.4 makes maintenance and service routines simple thanks to the worldwide Cat dealer network support. And for even more peace of mind, your Cat engine comes under warranty. See your Cat dealer for details.

Safety

Built-in clean emissions modules keep the Cat C4.4 performing at its peak while also keeping the air around the work site cleaner.

Air Inlet System
- Standard air cleaners
Control System
- Full electronic control system, all connectors and wiring looms waterproof and designed to withstand harsh off-highway environments
- Flexible and configurable software features and well-supported SAE J1939 CAN bus enables highly integrated machines
Cooling System
- Top tank temperature 108° C (226° F) as standard to minimize cooling pack size
- 50:50 water glycol mix
Flywheels And Flywheel Housing
- Fitted with SAE3 configuration as standard
Fuel System
- Electronic high pressure common rail
- Innovative filter design to ensure maximum protection of the engine
Lube System
- Wide choice of sumps for different applications
Power Take Off
- SAE A and SAE B flanges on left-hand side. Additional SAE A flange available on left-hand side. Engine power can also be taken from the front of the engine on some applications. Factory fitted compressors are also available.
General
- Available with or without a balancer
- Paint: Caterpillar yellow, with optional colors available at request
U.s. Epa Tier 4 Final, Eu Stage V Aftertreatment/ Clean Emissions Control Equipment
- Clean Emissions Module (CEM), consisting of Diesel Particulate Filter (DPF) and Diesel Oxidation Catalyst (DOC)
- Selective Catalytic Reduction (SCR)
- 3" flex pipe connection with straight, 45°, and 90° options for flexibility