C15 ACERT Land Mechanical Drilling Engine

Minimum Rating	440 bhp
Maximum Rating	595 bhp
Emissions	EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Rated Speed	2,100 RPM
Bore	5 in
Stroke	7 in

Request a Quote Download Brochure

Engine Specifications

Minimum Rating	440 bhp
Maximum Rating	595 bhp
Emissions	EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Rated Speed	2,100 RPM
Bore	5 in
Stroke	7 in
Displacement	928 in3
Aspiration	Turbocharged-Aftercooled
Engine Weight, net dry	2,743 lb
Oil Change Interval	250
Rotation (from flywheel end)	Counterclockwise
Flywheel and Flywheel Housing	SAE No. 0 or SAE No. 1
Flywheel Teeth	136 (SAE 0), 113 (SAE 1)
Governor and Protection	ADEM A3
Minimum Rating	440 BHP
Maximum Rating	595 BHP
Emissions	EPA and CARB Non-Road Mobile Tier 3, EU Stage IIIA
Rated Speed	2,100 r/min
Bore	5 in
Stroke	7 in
Displacement	928 in³
Aspiration	Turbocharged-Aftercooled
Engine Weight - Net Dry	2,743 lb
Oil Change Interval	250
Rotation from Flywheel End	Counterclockwise
Flywheel and Flywheel Housing	SAE No. 0 or SAE No. 1
Flywheel Teeth	136 (SAE 0), 113 (SAE 1)

Dimensions

Length	54 in
Width	37 in
Height	48 in
Length	54 in
Width	37 in
Height	48 in

Capacity for Liquids

Minimum Cooling System - Engine Only

6 gal (US)

Custom Packaging

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Custom Packaging

Transmissions

Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface. Cat transmissions deliver continuous operation under full load, smooth shifting at any speed, and maximum up time, with unmatched durability and easy maintenance.

Full Range of Attachments

Large variety of factory-installed engine attachments reduces packaging time

Testing

Every engine is full-load tested to ensure proper engine performance.

Product Support Offered Through Global Cat Dealer

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your petroleum engine - Cat parts and labor warranty - Preventive maintenance agreements available for repairbefore-failure options - S•O•SSM program matches your oil and coolant samples against Caterpillar set standards

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Web Site

For all your petroleum power requirements, visit www.cat.com/oilandgas.

Air Inlet System
- Single turbocharger, mid-mounted, inlet 152.4 mm (6 in), hose connection
Control System
- Electronic governing, PTO speed control
- Programmable ratings
- Cold mode start strategy
- Automatic altitude compensation
- Power compensation for fuel temperature
- Programmable low and high idle and TEL
- Electronic diagnostics and fault logging
- Engine monitoring and protection system (speed, temperature, pressure)
- J1939 Broadcast (diagnostic, engine status, and control)
Cooling System
- Thermostats and housing — outlet vertical
- Jacket water pump — gear-driven, centrifugal, RH
- RH front water pump inlet
- All plugs/fittings are STOR for lines gp water
Exhaust System
- Exhaust manifold — dry
- Front turbo exhaust
- Full marmon connection, maximum load 10 kg for direct connection to turbo
Flywheels And Flywheel Housings
- See Mandatory Options
Fuel System
- MEUI system
- Fuel filter, secondary, mid-mount (LH 2 micron high performance)
- Fuel transfer pump, LH front
- Fuel priming pump, LH mid-mount
- Fuel sample valve, mounted on fuel filter base
Lube System
- Crankcase breather — rear valve cover
- Oil cooler — RH
- Oil filter — RH
- Oil pan — front sump
- Oil filler — LH front
- Oil dipstick — LH front
- Oil pump
- Oil valve sampling — on oil filter base
Mounting System
- Front support (shipping only)
Power Take-offs
- Crankshaft pulley, 203.2 mm (8 in), 3 grooves 292.1 mm (11.5 in) 1 groove, all 15.9 mm (.63 in) width
- Hydraulic pump drive, SAE A, 11 tooth
General
- Vibration damper
- Paint — Cat yellow
- Lifting eyes
- Automatic variable timing, electronic
- Electronic installation kit 70-pin connector (connectors, pins, sockets)
- Literature group owner and operator
Mandatory Options
- Throttle position sensor
- Exhaust system — front or rear
- Flywheel housing or rear PTO
- Primary filter/water separator

Transmission Arrangement
- Transmission cooler
- Tool set
Air Compressor
- Air chambers
- Air compressor governor
Air Inlet System
- Air cleaners
- Precleaners
- Air lines
- Air inlet gasket
Charging System
- Charging alternators
- Alternator mountings
- Alternator wiring
- Circuit breaker mountings
- Alternator belt guard
Cooling System
- Radiator — installed
- Radiator — ship loose
- Fan drive f/u/w Caterpillar installed radiator
- Fan drives for customer-supplied radiators
- Fan height instructions
- Vee belts for customer-supplied radiators
- Aftercooler lines f/u/w Caterpillar installed radiator
- Rear-facing exhaust
- Aftercooler lines
- Suction fan adapters — attaches fan to fan pulley
- Blower fan adapter — attaches fan to fan pulley
- Blower fan
- Suction fan
- Fan belt tightener
- Coolant level sensor
- Dry charge coolant conditioners
- Dry charge coolant conditioner element
Exhaust System
- Turbo exhaust connection
- Flexible fitting
- Elbows
- Flanges
- Dry elbow