C280-16 Offshore Generator Set (Front-Mounted Turbo)

Exterior View

C280-16 Offshore Generator Set (Front-Mounted Turbo)

Aspiration	Turbocharged-Aftercooled
Fuel System	EUI
Oil Change Interval	1,000 hr
Stroke	12 in
Bore	11 in
Displacement	18,062 in3

Request a Quote Download Brochure

Engine Specifications

Aspiration	Turbocharged-Aftercooled
Fuel System	EUI
Oil Change Interval	1,000 hr
Stroke	12 in
Bore	11 in
Displacement	18,062 in3
Minimum Rating	7,510 kV·A
Maximum Rating	7,684 kV·A
Emissions	IMO Tier 2 / EPA Marine Tier 2
Engine Control	Dual ADEM™ A4
Generator Set Control	Cat® Alarm and Protection System
Weight	145,505 lb
Aspiration	Turbocharged-Aftercooled
Bore	11 in
Displacement	18,062 in³
Fuel System	EUI
Oil Change Interval	1,000 h
Stroke	12 in

Dimensions

Length	405 in
Height	161 in
Width	110 in
Height	161 in
Length	405 in
Width	110 in

Capacity for Liquids

Cooling System (Engine)	329 gal
Lube Oil System (Refill)	443 gal
Cooling System - Engine	329 gal (US)
Lube Oil System - Refill	443 gal (US)

Custom Packaging

For any petroleum application, trust Caterpillar to meet your project needs with custom factory generator sets and mechanical packages. Cat engines, generators, controls, radiators, and transmissions can be custom designed and matched in collaboration with our local dealers to create unique solutions. Custom packages are globally supported and are covered by a one year warranty after startup.

Product Support Offered Through the Global Cat Dealer Network

- More than 2,200 dealer outlets - Cat factory-trained dealer technicians service every aspect of your Cat petroleum product - Worldwide parts availability, service, and warranty - Preventive maintenance agreements available for repairbefore- failure opti

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.

Web Site

For all your petroleum power requirements, visit www.cat.com/oilandgas.

Product Consist
- The engine is a turbocharged, aftercooled, four-strokecycle- diesel, electronic unit injection engine with a 280 mm (11 in) bore by 300 mm (11.8 in) stroke. SAE standard rotation is counterclockwise as viewed from the rear of engine flywheel.
Emissions Certifications
- GL and CCS approved IMO certificate — includes statement of compliance or Engine International Air Pollution Prevention (EIAPP) certificate, supplied by the Recognized Organization (RO) where available, and technical file to be kept on board per IMO regulations.
Marine Certification Society Type-approval
- ABS, BV, CCS, DnV, GL, LRS
- Spray shielding to meet SOLAS regulations for flammable fluids
European Certifications
- Declaration of Incorporation for EU Machinery Safety
- Directive and EU Low Voltage Safety Directive
Air Inlet System
- Fresh water aftercooler, corrosion resistant coated (air side)
- Air inlet shutoff
- Turbochargers (2), front-mounted, oil lubricated
- 90° adapter and straight adapters for air inlet to turbocharger
- Air cleaners
- Air cleaners with Cat dry paper filter elements (approximately 99.9% efficient at filtering SAE fine dust)
Control System
- Dual Cat ADEM A4 electronic engine control module with electronic unit injector fuel system, rigid wiring harness (10 amp 24V power required to drive electronic engine control modules), direct rack control
Cooling System
- Gear-driven jacket water (JW) pump
- Gear-driven separate-circuit aftercooler/oil cooler (AC/OC) pump
- Front-mounted water connections: JW and AC/OC, 6" ANSI
- Jacket Water Thermostat Options:
- AC/OC Thermostat Options:
- Expansion Tank Options:
Exhaust System
- Dry, gas tight exhaust manifold
- Dual turbocharger, front-mounted
- Dual wastegate; hard shielding - SOLAS compliant
- Exhaust manifold shields
Fuel System
- Distillate fuel (requires viscosity ranging from 1.4 cSt to 20 cSt at 38°C); fuel pump, gear-driven; fuel transfer pump (mounted on left-hand side); duplex fuel filters, rear-engine-mounted; electronically controlled unit injectors
- ; crankcase breathers, top-mounted; turbochargers (2), front-mounted, oil lubricated
Lube System
- Centrifugal oil filters and lines with single shutoff - RH mounted on cylinder block inspection covers, serviceable with the engine running
- Oil pump, gear-driven
- Oil filler and dipstick - located in base integrated tank
- Oil pressure regulating valve
- Duplex oil filter - accessory module mounted
- Off engine mounted oil cooler - DTO quote required for package connections
- Base integrated tank - DTO required
- Electric continuous prelube pump
- Redundant prelube with continuous electric prelube
- Intermittent air prelube backup
Protection System
- Flywheel and damper guards
- Crankcase explosion relief valves
Instrumentation
- Cat Alarm and Protection System Features:
Starting System
- TDI dual air starting motors, LH rear
- Shutoff valve
- Two integrated relay valves with built-in screen #40 mesh and solenoid
- Air pressure sensor, monitored by Cat Alarm and Protection System - requires customer wiring
- Maximum operating (dynamic) pressure: 10 bar (150 psi)
- Maximum static pressure: 14 bar (200 psi)
- 3-inch ANSI flange customer connection; requires customer-provided 3-inch supply air line from receiver or regulator to air starter and flex connection; if regulator is used, Cv of 40 or greater is required
- Pressure reducing valve
Mounting System
- Design-To-Order (DTO) base
General
- Generator panel
- Torsional coupling
- Engine barring device options:

Air Inlet System
- Soot filter
- Air cleaner support bracket
Cooling System
- Jacket water heater
- ANSI connection adapters
Exhaust System
- Flexible exhaust fittings
- Weld flanges
Fuel System
- Manual fuel priming pump
- Duplex primary fuel strainer
Lube System
- Lube oil heater
Protection System
- Cylinder pressure relief valve
- Spray shielding
- Oil mist detector
Mounting System
- Vertically-restrained vibration isolators and weld plates
General
- Accessory module - Front mounted for mounting expansion tank, heat exchanger, instrument panel, annunciator panel, alarm and shutdown contactors, and fuel strainer
- Engine testing — certified dynamometer test, fuel consumption test, rated speed performance test, overload test, minimum power setting, peak firing pressure test, turbo work certificates, crankshaft work certificates, standard and project-specific witness testing
- Spare parts kit
- Engine lifting eyes
Literature
- Project-specific installation drawings
- Electrical schematics and P&ID drawings