C32 ACERT™ Tier 4 Final Engine

C32 ACERT™ Tier 4 Final Engine

Length 75 in.
Width 63 in.
Height 61 in.
Weight 6,107 lb
Minimum Rating 1,125 BHP
Maximum Rating 1,125 BHP
Request a Quote Download Brochure
Dimensions
Length 75 in.
Width 63 in.
Height 61 in.
Weight 6,107 lb
Length 75 in
Width 63 in
Height 61 in
Weight 6,850 lb
General Specifications
Minimum Rating 1,125 BHP
Maximum Rating 1,125 BHP
Governor and Protection ADEM A4
Aspiration Turbocharged-Aftercooled
Displacement 1,958 in³
Flywheel and Flywheel Housing SAE No. 0
Flywheel Teeth 136
Rotation from Flywheel End Counterclockwise
Stroke 6 in
Bore 6 in
Emissions
Emissions U.S. EPA Tier 4 Final
Capacity for Liquids
Cooling System 16 gal (US)

Emissions

- Designed to meet U.S. EPA Tier 4 Final emissions requirements. - On-engine NOx reduction system with optimized piston, ring, liner, and fuel system configuration to reduce NOx while minimizing in-cylinder sooting- Aftertreatment features diesel oxidation catalyst- Meets Tier 4 Final emissions requirements four years early, achieving environmental benefits earlier than required.

Engine Design

- Proven reliability and durability of engine and aftertreatment- Broad operating speed range- High power density- PTO drive options provide flexible access to auxiliary power for pumps and other needs

Low Total Cost of Ownership

- Optimized fuel consumption- Maintenance-free aftertreatment

Advanced Digital Engine Management

ADEM A4 control system providing integrated ignition, speed governing, protection, and controls. ADEM A4 has improved: user interface, display system, shutdown controls, and system diagnostics.

Custom Packaging

For any petroleum application, trust Caterpillar to meet your exact needs with a factory custom package. Cat® engines, generators, enclosures, controls, radiators, transmissions, aftertreatment solutions — anything your project requires — can be custom designed and matched to create a one-of-a kind solution. Custom packages are globally supported and are covered by a one-year warranty after startup.

Transmissions

- Caterpillar has a full line of engine-transmission packages that can be fully integrated with your axle, hydraulics, and operator interface.- C32 ACERT™ optimized Cat transmission match: TH48-E70

Testing

Every engine is full-load tested to ensure proper engine performance.

Product Support Offered Through Global Cat Dealer

- More than 2,200 dealer outlets- Caterpillar factory-trained dealer technicians service every aspect of your petroleum engine- Caterpillar parts and labor warrantyPreventive maintenance agreements available for repairbefore-failure optionsS•O•SSM program matches your oil and coolant samples against Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enables Caterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheel housings- Machine critical components- Assemble complete engine

Web Site

For all your petroleum power requirements, visit www.cat.com/oilandgas.

  • Air Inlet System
    • Twin side-mounted turbochargers, ATAAC
  • Control System
    • Automatic altitude compensation; power compensation for fuel temperature; electronic diagnostics and fault logging; engine monitoring and protection system (speeds, temperature, pressure); J1939 Broadcast (diagnostic, engine status and control); ADEM A4 electronic control
  • Cooling System
    • Thermostats and housing; jacket water pump, geardriven, centrifugal, RH
  • Exhaust System
    • Exhaust dry manifold, 127 mm (5 in) slip fit connection, diesel oxidation catalyst
  • Fuel System
    • Mechanical Electronic Unit Injection (MEUI) system; primary, secondary, and tertiary fuel filter; electronic fuel priming pump-integrated with primary fuel filter base; fuel transfer pump
  • Lube System
    • Crankcase fumes filtration system, RH mounted; oil cooler — RH; oil filler — RH; oil level gauge — RH; shallow rear sump oil pan — 250-hour
×