C9 ACERT™ Water Cooled Manifold Engine

C9 ACERT™ Water Cooled Manifold Engine

Length 44 in.
Width 35 in.
Height 41 in.
Weight 1,844 lb
Lube Oil System (refill) 8 gal
Minimum Rating 325 BHP
Request a Quote Download Brochure
Dimensions
Length 44 in.
Width 35 in.
Height 41 in.
Weight 1,844 lb
Length 43 in
Width 33 in
Height 40 in
Weight 1,576 lb
Capacity for Liquids
Lube Oil System (refill) 8 gal
Cooling System 4 gal (US)
Lube Oil System - Refill 8 gal (US)
General Specifications
Minimum Rating 325 BHP
Maximum Rating 340 BHP
Governor and Protection Electronic (ADEM™ A4)
Aspiration Turbocharged-Aftercooled
Displacement 538 in³
Flywheel and Flywheel Housing SAE 1 or 2
Flywheel Teeth 113 (SAE 1), 134 (SAE 2)
Rotation from Flywheel End Counterclockwise
Stroke 6 in
Bore 4 in
Emissions
Emissions EPA and CARB Non-Road Tier 3,EU Stage IIIA, EPA Marine Tier 2, IMO Tier II

Engine Design

- Proven reliability and durability- Robust diesel strength design prolongs life and lowersowning and operating costs- Broad operating speed range- PTO drive options provide flexible access to auxiliarypower for pumps and other needs

Advanced Digital Engine Management

ADEM A4 engine management system integrates speed control, air/fuel ratio control, and ignition/detonationcontrols into a complete engine management controlsystem with integrated digital ignition, engine protectionand monitoring

Air System

- Water-cooled exhaust manifold and turbo maintainATEX-compliant skin temperature during operation- Air Inlet shut-off enables emergency shut-off foroperator

Improved Serviceability

- Front, right, and rear dipstick- Remote oil and fuel filters- 12V and 24V electronic systems to improve applicationflexibility

Optional Equipment

- Air inlet for cold starting capability- Messenger display for operator friendly diagnostics- Spark arresting muffler

Custom Packaging

For any petroleum application, trust Caterpillar to meetyour exact needs with a factory custom package. Cat®engines, generators, enclosures, controls, radiators,transmissions — anything your project requires — can becustom designed and matched to create a one-of-a kindsolution. Custom packages are globally supported andare covered by a one-year warranty after startup

Transmissions

Caterpillar has a full line of engine/transmission packagesthat can be fully integrated with your axle, hydraulics, andoperator interface. Cat transmissions deliver continuousoperation under full load, smooth shifting at any speed,and maximum up time, with unmatched durability andeasy maintenance.

Full Range of Attachments

Large variety of factory installed engine attachmentsreduces packaging time

Testing

Every engine is full-load tested to ensure proper engineperformance.

Product Support Offered Through Global Cat Dealer

- More than 2,200 dealer outlets- Cat factory-trained dealer technicians service everyaspect of your petroleum engine- Cat parts and labor warranty- Preventive maintenance agreements available for repairbefore-failure options- S•O•SSM program matches your oil and coolant samplesagainst Caterpillar set standards to determine:- Internal engine component condition- Presence of unwanted fluids- Presence of combustion by-products- Site-specific oil change interval

Over 80 Years of Engine Manufacturing Experience

Ownership of these manufacturing processes enablesCaterpillar to produce high quality, dependable products.- Cast engine blocks, heads, cylinder liners, and flywheelhousings- Machine critical components- Assemble complete engine

Web Site

For all your petroleum power requirements, visit www.cat.com/oilandgas.

  • Air Inlet System
    • Turbocharger, separate circuit (SCAC) or remote (REMAC)aftercooler
    • Single, right-side, center-mounted turbo with water-cooledturbine housing
    • Air inlet 101.6 mm (4 in) connection type
  • Control System
    • Electronic governing, PTO speed control
    • Programmable ratings
    • Cold mode start strategy
    • Automatic altitude compensation
    • Fuel cooled ECU
    • Power compensation for fuel temperature
    • Programmable low and high idle
    • Electronic diagnostics and fault logging
    • Programmable monitoring system (engine speed, temperature,pressure)
    • J1939 broadcast (diagnostic and engine status)
    • Certified electrical control system (hazardous environment only)
    • Derated engine: automatic ambient temperature compensation
  • Cooling System
    • Thermostats and housing, RH forward-facing outlet — 51 mm(2.01 in) connection
    • Jacket water pump — belt-driven, centrifugal
    • Water pump — inlet RH facing downward 63 mm (2.48 in)
  • Exhaust System
    • Exhaust manifold — water-cooled
    • Single, right-side, center-mounted turbo with water-cooledturbine housing
    • Rear facing turbo exhaust 81.8 mm (3.22 in) connection, nonV-band clamp
  • Flywheels And Flywheel Housing
    • Mandatory selection of:SAE No. 1 or SAE No. 2 flywheel and housing, SAE standard rotation
  • Fuel System
    • HEUI fuel system
    • Fuel filter — secondary, LH (2-micron high performance)
    • Fuel transfer pump — left front
    • Fuel priming pump — left front
  • Lube System
    • Crankcase breather — LH
    • Crankcase fumes disposal — with integrated service indicator, LH
    • Oil cooler — RH
    • Oil filter — RH
    • Oil pan — front sump
    • Oil filler — top mounted
    • Oil level gauge — LH side
    • Oil pump — gear-driven
    • Oil valve sampling
    • Preservation of turbocharger, flywheel, and crankcase
  • Power Take-offs
    • Crankshaft drive pulley — 2 grooves, 190 mm (7.5 in) diameter,22.3 mm (7/8 in) wide
  • General
    • Vibration damper
    • Lifting eyes
    • Automatic variable timing — electronic
    • Literature
  • Mandatory Options
    • Flywheel housing and flywheel
    • Throttle position sensor and/or throttle control
    • (Non-hazardous environment only)
    • Primary filter/water separator
    • Turbo orientation
  • Air Compressors
    • Air compressors
    • Air compressor governor
  • Air Inlet System
    • Air cleaner
    • Precleaner
    • Air inlet elbow
    • Air shutoffs
  • Charging Systems
    • Charging alternators
    • Alternator mounting
    • Alternator belt tensioner
    • Alternator pulleys
    • Alternator guards
  • Cooling System
    • Radiators
    • Fan drive and pulley — f/u/w radiator packages
    • Fans f/u/w radiator packages
    • Coolant level sensor
    • Fan drive mountings
    • Fan adapters
    • Fan adapter for blower fans
    • Fan pulleys
    • Fan height instructions
    • Vee belts for customer-supplied radiators
    • Suction fans and blower fans
    • Water inlet elbows
    • Dry charge coolant conditioners
  • Emissions Certifications
    • IMO certification
  • Exhaust System
    • Flexible fitting
    • Turbocharger exhaust outlet adapters
    • Elbows, flange, pipes, clamp
    • Rain caps
    • Manifolds
    • Mufflers
  • Flywheels And Flywheel Housing
    • Crankshaft seal
  • Fuel System
    • Flexible fuel lines
    • Water separator and fuel filters
    • Fuel cooler
  • Instrumentation
    • Gauges and instrument panels
    • Interconnect harness
    • Voltmeters
    • Gauge mounting
    • Ammeter
  • Lube System
    • Oil pans
    • Drain and cover
    • Oil level gauges
    • Remote oil filter
    • Oil fillers
    • Lubricating oil
    • Fumes disposal
  • Mounting System
    • Structural steel base
    • Engine support — front and rear
  • Power Take-offs
    • Enclosed clutch
    • Clutch supports
    • Flywheel stub shaft
    • Hydraulic pump drives
    • Hydraulic gear pumps
  • Starting System
    • Starting aids
    • Electric starting motors — 12V and 24V
    • Battery sets — 12V and 24V (dry)
    • Battery cable
  • General
    • Tool set
×