Dimensions
- Length
- 75 in
- Height
- 51 in
- Width
- 31 in
- Jaw Depth
- 19 in
- Jaw Width, fixed
- 12 in
- Jaw Width, moveable
- 4 in
- Jaw Opening, max.
- 13 in
- Cutter Length
- 15 in
- Weight (housing, jaw & bracket)
- 4,121 lb
- Weight (jaw only)
- 1,454 lb
- Cycle time
- 3 Seconds
Performance
- Force at Cutting Tip
- 0
- Cutting Force - Cutter Tip
- 2 Sh Ton
- Force at Throat
- 0
- Cycle Time - Open
- 0 s
- Cutting Force - Piercing Tip
- 1 Sh Ton
- Cutting Force - Primary Cutter
- 4 Sh Ton
- Cycle Time - Close
- 0 s
- Force Primary Blade Center
- 0
- Cycle Time - Open
- 661 lb
- Cycle Time - Open
- 2 s
- Cycle Time - Close
- 1 s
- Cutting Force - Blade Throat
- 451 Sh Ton
- Cutting Force - Blade Center
- 205 Sh Ton
- Cutting Force - Blade Tip
- 114 Sh Ton
Dimensions - Housing + Jaw
- Length
- 75 in
- Height
- 51 in
- Width
- 31 in
- Width
- 75 in
- Length
- 51 in
- Height
- 31 in
Dimensions - Jaw
- Jaw Depth
- 19 in
- Jaw Width - Fixed
- 12 in
- Jaw Width - Moveable
- 3 in
- Jaw Opening - Maximum
- 13 in
- Cutter Length
- 15 in
- Jaw Opening
- 0
- Jaw Depth
- 19 in
- Cutter Length
- 15 in
- Jaw Opening - Maximum
- 13 in
- Jaw Width - Fixed
- 12 in
- Jaw Width - Moveable
- 4 in
Weight
- Weight - Housing, Jaw and Bracket
- 41 lb
- Weight - Jaw Only
- 15 lb
- Weight - Jaw
- 0
- Weight - With Housing
- 0
- Weight - Jaw Only
- 661 lb
- Weight - Housing, Jaw and Bracket
- 4,131 lb
- Weight - Jaw Only
- 1,462 lb
Hydraulic Requirements
- Jaw Circuit - Max. Oil Pressure
- 150 gal/min
- Jaw Circuit - Max. Oil Flow
- 140 bar
- Rotation Circuit - Max. Oil Pressure
- 0 l/min
- Cutting Circuit - Hyd. Maximum Op. Pressure
- 0
- Rotation Circuit, hyd. Maximum Oil Flow
- 0
- Rotation Circuit, hyd. Maximum Op. Pressure
- 0
- Jaw Circuit - Max. Oil Pressure
- 5,076 psi
- Jaw Circuit - Max. Oil Flow
- 40 gal/min
- Rotation Circuit - Max. Oil Pressure
- 2,031 psi
- Rotation Circuit - Max. Oil Flow
- 11 gal/min
Recommended Carrier Weight
- Excavator Minimum
- 18 tons
- Excavator Maximum
- 25 tons
Cycle Times are 50 Percent Faster
- New speed booster technology dynamically shifts hydraulic force from speed to boost mode, automatically as you operate.
- You'll spend less time waiting for the jaw to open or close to contact, as the speed valve automatically adjusts to fast flow when there's no load.
- Maximum crushing/cutting force is applied as soon as the jaw contacts material.
Up to 19 Percent More Force
- Process more per hour, ship more per shift, make more money every day. Speed booster magnifies hydraulic force when the jaw contacts material, quickly making the cut.
- Mount more power even on smaller excavators. Compact design keeps the center of gravity as close as possible to the machine.
- Get maximum performance and total support with a complete Cat demolition solution. Programs for the MP are built into the Next Gen Cat operator display. Single point of support your entire system by your local Cat dealer.
Change Jaw in 15 Minutes
- Innovative jaw locking enables a single operator to easily change jaws in 15 minutes or less. Requires only standard hand tools.
- Simple and safe jaw changes are part of the design. Every jaw sits stable, even on the roughest work site, on the included jaw stand.
- MP318 accepts these jaw types:
- Concrete Cutter - outer jaw cracks concrete; inner shear jaw cuts steel
- Demolition - opens wide to crack the largest concrete structures
- Pulverizer - crushes concrete, separating the rebar
- Shear - cuts structural steel, pipe, and cable
- Universal - innovative design cuts steel crushes concrete
Durable and Maintainable
- Protect your investment and maintain performance, quickly and economically. Jaws are protected with easily changed, individually replaceable wear parts.
- Get more production time per cutter before replacement. Most cutting blades can be flipped in two ways, to use four different cutting edges.
- Even when deep into debris, the cylinder rod is armored to prevent damage and the main cylinder body is protected inside the housing.
