725 Articulated Truck - Thompson Machinery

Exterior View
Exterior View
Interior View
Interior View

Request a Quote

Engine

Engine Model: Cat C9.3
Bore: 5 in
Stroke: 45 in
Displacement: 568 in³
Peak Engine Torque Gross (SAE J1995): 1,275 ft·lbf
Gross Power - SAE J1995: 342 HP
Net Power - ISO 14396: 338 HP
Engine Model - U.S. EPA Tier 4 Final/EU Stage IV: Cat® C9.3
No Engine De-rating Below: 3,000 ft
Peak Engine Torque Net (SAE J1349): 1,263 ft·lbf
Net Power - SAE J1349: 334 HP
Peak Engine Torque Speed: 1,200 r/min
Note (1): The power ratings apply at rated speed of 1,700 rpm when tested under the conditions for the specified standard.
Emissions: The reference to Tier 4 Final/Stage IV includes U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final), as well as Korea Tier 4 Final emission standards.
Note (3): Net power when the fan is at maximum speed is 249 kW (334 hp) per the SAE reference conditions.
Note (2): The net power advertised is the power available at the flywheel when the engine is equipped with alternator, air cleaner, muffler and fan at minimum speed.
Note (4): DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1. ISO 22241-1 requirements are met by many brands of DEF, including those that carry the AdBlue or API certificatio

Weights

Rated Payload: 27 ton (US)

Body Capacities

Heaped (SAE 2:1): 20 yd³
Struck: 14 yd³
Tailgate Heaped SAE 2:1: 20 yd³
Tailgate Struck: 15 yd³

Transmission

Forward - 1: 5 mT/hr
Forward - 2: 9 mT/hr
Forward - 3: 14 mT/hr
Forward - 4: 22 mT/hr
Forward - 5: 31 mT/hr
Forward - 6: 36 mT/hr
Reverse - 1: 6 mT/hr

Operating Weights

Total - Loaded: 103,886 lb
Rear Axle - Rated Load: 23,699 lb
Total - Empty: 50,975 lb
Total - Rated Load: 52,910 lb
Center Axle - Loaded: 33,944 lb
Front Axle - Rated Load: 5,511 lb
Center Axle - Rated Load: 23,699 lb
Center Axle - Empty: 10,242 lb
Rear Axle - Loaded: 33,457 lb
Front Axle - Loaded: 36,484 lb
Rear Axle - Empty: 9,757 lb
Front Axle - Empty: 30,974 lb

Body Plate Thickness

Side Plates: 0 in
Front Plate: 0 in
Base Plate: 1 in

Service Refill Capacities

Fuel Tank: 91 gal (US)
Cooling System: 18 gal (US)
Hydraulic System: 29 gal (US)
Engine Crankcase: 8 gal (US)
Transmission: 10 gal (US)
Final Drives/Differential: 33 gal (US)
Output Transfer Gear Box: 5 gal (US)
DEF Tank: 4 gal (US)
Final Drive - Each: 2 gal (US)
Steering/Hoist Hydraulic System: 24 gal (US)

Body Hoist

Raise Time: 10 s
Lower Time: 8 s

Steering

Lock to Lock: 4.75 seconds @ 60 rpm

Standards

Brakes: ISO 3450 – 2011
Cab - FOPS: ISO 3449 Level II – 2008
Cab - ROPS: ISO 3471 – 2008
Steering: ISO 5010 – 2007

Body Plate

Type: High strength Brinell HB450 wear resistant steel

Turning Circle

Turning Dimensions - Inside Radius: 153 in
Turning Dimensions - Aisle Width: 210 in
Turning Dimensions - SAE Turning Radius: 294 in
Turning Dimensions - Clearance Radius: 318 in
Turning Dimensions - Steer Angle - Left/Right: 45°
Note: Dimensions are for machines equipped with 23.5R25 tires.

Optimal Loader/Truck Pass Matching

Wheel Loader: 950M - Passes: 5
Wheel Loader: 962M - Passes: 4-5
Wheel Loaders: 966M/966M XE - Passes: 4
Hydraulic Excavators: 336F/336F XE - Passes: 5-6
Wheel Loaders: 972M/972M XE - Passes: 3-4
Hydraulic Excavators: 349F/349F XE - Passes: 4-5

Sound Levels

Note (1): The declared dynamic operator sound pressure level is 69±2 dB(A) when "ISO 6396:2008" is used to measure the value for an enclosed cab. The measurement was conducted at 70% of the maximum cooling fans speed. The sound level may vary at different cooling f
Note (2): Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in noisy environments.
Interior Cab: 69 dB(A)

MAXIMIZE PERFORMANCE

INDUSTRIAL GRADE TRANSMISSION

AUTOMATIC CONTROLS

POWERFUL EFFICIENCY

WORK IN COMFORT

BUILT TO PERFORM

HEAVY DUTY CONSTRUCTION

TECHNOLOGY THAT GETS WORK DONE

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Operator Environment
- Air conditioning with R134A refrigerant
- Machine operation monitoring system includes:
  – Action lamp
  – Engine oil pressure
  – Primary steering system
  – Left and right turn signal
  – High beam
  – Coolant temperature
  – Tachometer
  – Parking brake
  – Fuel level
  – Transmission oil temperature
  – Brake system
  – Transmission hold
  – Hoist control
  – Hydraulic system
  – Charging system
  – Retarder
  – Transmission fault
  – Traction control system
  – Check engine lamp
- Windows opening both sides, tinted
- Storage:
  – Cup holder
  – Flask receptacle
  – Under seat storage
  – Door pocket
  – Behind operator seat storage
  – Coat hook
- Glass windows:
  – Front, laminated and tinted
  – Sides and rear, toughened and tinted
- Seats:
  – Operator: fully adjustable, air suspension
  – Trainer: padded with lap belt
- Tilt and telescopic steering wheel
- Retractable belt: Operator seat and second seat
- Adjustable air vents
- Heater and defroster with four-speed fan
- Sun visor
- Touchscreen display incorporating the rearview camera video feed
- Windshield wiper and washer, two speed, intermittent (front)
- Combined gear selection and hoist control lever
- Windshield wiper and washer, two speed (rear)
- Liquid Crystal Display (LCD):
  – Alert indicator
  – Selected gear and direction
  – Speed or auto shift
  – Review Operation and Maintenance Manual (OMM)
  – Primary steering failure warning
  – Seat belt warning
  – Secondary steering failure warning
  – Diesel Particulate Filter (DPF) regeneration filter
  – Machine Security System (MSS) ready
  – Secondary steering energy source engaged
  – Hour meter
  – Retarder active
- Secondary steering – electro hydraulic
- Mirrors: extensive arrangement for improved visibility
Cat Technologies
- Product Link
- Cat Detect with Stability Assist
Electrical And Lighting
- Electrical system: 24-volt, 5A 24- to 12-volt converter
- Lighting systems:
  – Cab interior
  – Two head lamps
  – Two width marker
  – Two reversing
  – Work light/cab access light
  – Two stop/tail lights
  – Front and rear direction indicators
- Main disconnect switch
- Horn
- Batteries (two) maintenance free
- Remote starting receptacle (cables not included)
Power Train
- Differentials: standard with automatic clutched inter- and cross-axle differential locks
- Cat Clean Emission Module (CEM) and exhaust aftertreatment package
- Cat C9.3 engine
- Three axle, six-wheel drive
- Retarder: engine compression brake
- Dual circuit oil immersed, enclosed brakes – all wheels
- Auto shift six-speed forward and single speed reverse transmission
Safety
- Reverse alarm
- Rearview camera
- ROPS/FOPS cab
Guards
- Front dump body spill guard, integral part of fabricated body
- Crankcase
- Axle
- Rear window
- Radiator
Other Standard Equipment
- Vandalism protection: lockable caps
- Mud flaps: wheel arch and body mounted with transportation tiebacks
- Sound suppression (only standard in Europe)
- S·O·S sampling valves
- Tires, six 23.5R25

Note
- Standard and optional equipment may vary. Consult your Cat dealer for details.
Optional Equipment
- Cold weather coolant –51° C (–60° F)
- Infrared glass – high ambient cab
- Auto lube installation for automatic greasing of bearings
- Cold weather start attachment
- Bare chassis (no body) standard wheel base
- Roof mounted High Intensity Discharge (HID) work lights
- Product Link Elite: PLE641 (cellular). Product Link is optional.
- Heated/cooled seat
- Exhaust heated body
- Fuel additive – anti-waxing
- Flashing LED beacon
- Body liners
- Ether start
- Four-point seat belt
- Machine Security System (MSS)
- Cat Production Measurement payload monitoring system
- Sound suppression (only standard in Europe)
- Fast fuel fill
- Wheel chocks
- Engine block heater
- Heated rearview motorized mirrors
- Window blinds
- Bluetooth radio stereo system
- Scissor tailgate

Related Used Equipment

2019 Cat 745

2019 Cat 74504