826 Landfill Compactor

  • Exterior View
  • Interior View
Request a Quote

Engine

Engine Model
C15 Cat®
Emissions
U.S. EPA Tier 4 Final/ EU Stage V/Korea Stage V and Japan 2014 or Brazil MAR-1, emitting equivalent to U.S. EPA Tier 3/EU Stage IIIA
Net Power - ISO 9249
405 hp
Gross Power - SAE J1995
435 hp
Torque Rise
33%
Bore
5 in
Stroke
7 in
Displacement
928 in³
High Idle Speed
2,300 r/min
Low Idle Speed
800 r/min
Maximum Altitude - Without Derating (Tier 3/Stage IIIA)
9,098 ft
Gross Power - SAE J1995:2014
435 hp
Net Power - SAE J1349:2011
405 hp
Net Power - ISO 9249:2007
405 hp
Engine Power - ISO 14396:2002
426 hp
Rated Speed
1,800
Note
Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.
Peak Torque (1,300 rpm)
1,479 lbf·ft
Maximum Altitude – Without Derating (Tier 4 Final/Stage V)
9,298 ft

Operating Specifications

Maximum Operating Weight (Tier 3/Stage IIIA equivalent)
91,549 lb
Operating Weight (Tier 4 Final/Stage V)
90,207 lb
Operating Weight (Tier 3/Stage IIIA equivalent)
89,186 lb
Maximum Operating Weight (Tier 4 Final/Stage V)
92,568 lb

Transmission

Transmission Type
Planetary - Powershift - ECPC
Direct Drive - Forward 1
4 mile/h
Direct Drive - Forward 2
8 mile/h
Direct Drive - Reverse 1
4 mile/h
Direct Drive - Reverse 2
9 mile/h

Hydraulic System

Pump Flow at 1,950 rpm
31 gal/min
Main Relief Pressure
3,771 psi
Maximum Supply Pressure
3,495 psi
Lift System
Double Acting Cylinder
Bore
5 in
Stroke
42 in
Pump Flow at 1800 rpm
31 gpm

Service Refill Capacities

Cooling System
31 gal (US)
Engine Crankcase
9 gal (US)
Transmission
17 gal (US)
Fuel Tank
207 gal (US)
Differential - Final Drives - Front
26 gal (US)
Differential - Final Drives - Rear
29 gal (US)
Hydraulic Tank Only
35 gal (US)
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage IV)
9 gal (US)
Note
Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl ester) * • 100% renewable diesel, H
Diesel Exhaust Fluid Tank (Tier 4 Final/Stage V)
9 gal (US)

Axles

Front
Planetary - Fixed
Rear
Planetary - Oscillating
Oscillation Angle
±5°

Braking System

Service Brakes
Multi Disc Wet (Enclosed) 2 WHL
Parking Brake
Drum and Shoe, Spring Applied, Hydraulic Released

Sound Performance - Tier 4 Final/EU Stage V - Standard

Operator Sound Level (ISO 6396)
73 dB(A)
Machine Sound Level (ISO 6395)
113 dB(A)

Sound Performance - Tier 4 Final/EU Stage V - Suppression

Operator Sound Level (ISO 6396
72 dB(A)
Machine Sound Level (ISO 6395)
110 dB(A)

Hydraulic System - Steering

Steering System - Circuit
Pilot operated, load sensing
Bore
5 in
Stroke
23 in
Steering System - Pump
Piston - Variable Displacement
Maximum System Flow
170 L/min @ 1,800 rpm (44.9 gal/min @ 1,800 rpm)
Steering Pressure Limited
3,481 psi
Vehicle Articulation Angle
86 °

Cab - Standard

Machine Sound Power Level (ISO 6395)
113 dB(A)
Operator Sound Pressure Level - ISO 6396
73 dB(A)

Cab - Suppression

Machine Sound Power Level (ISO 6395)
110 dB(A)
Operator Sound Pressure Level - ISO 6396
72 dB(A)

Dimensions (Approximate)

Height to Top of Air Conditioning Condenser
15 ft
Height - Cab Roof
14 ft
Height - Top of Beacon
16 ft
Height - Top of Exhaust Pipe
15 ft
Height - Top of Hood
11 ft
Ground Clearance - Bumper
3 ft
Centerline of Rear Axle to Edge of Counterweight - No Rear Radiator Guard
9 ft
Centerline of Rear Axle to Edge of Counterweight - Including Rear Radiator Guard
10 ft
Hitch to Centerline of Front Axle
6 ft
Wheel Base
12 ft
Length - With Blade on Ground - Straight Blade - Including Rear Radiator Guard
29 ft
Ground Clearance
2 ft
Width - Over Wheels
12 ft
Turning Radius - Inside of Wheels
9 ft

Wheels

Combination Tips (Weight Group)
21,125 lb
Plus Tips - Weight (Group)
22,002 lb
Paddle Tips - Weight (Group)
20,540 lb
Outside Diameter
78 in
Drum Diameter
63 in
Drum Width
47 in
Feet Per Row
6
Feet Per Wheel
30
Replaceable
Weld On
Width Over Drums
3,800 mm
Tip Height
179 mm
Diamond Tips Weight (Group)
23,997 lb
Outside Diameter - Diamond
78 in
Tip Height - Diamond
7 in

Sound Performance - Tier 4 Final/EU Stage V

Operator Sound Level (ISO 6396:2008) - Standard
73 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
113 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
110 dB(A)
Note (1)
The operator sound pressure level was measured according to the test procedures and conditions specified in ISO 6396:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (2)
The machine sound power level was measured according to the test ISO 6395:2008. The measurement was conducted at 70% of the maximum engine cooling fan speed.
Note (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Level (ISO 6396:2008) - Standard
73 dB(A)
Machine Sound Level (ISO 6395:2008) - Standard
113 dB(A)
Operator Sound Level (ISO 6396:2008) - Suppression
72 dB(A)
Machine Sound Level (ISO 6395:2008) - Suppression
110 dB(A)
Note (1)
* Sound suppression equipped
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
Hearing protection may be needed when operating with an open operator station and cab (when not properly maintained or doors/windows open) for extended periods or in a noisy environment.
Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Straight Blade

Width – Moldboard Length
14 ft
Width - Over End Bits
15 ft
Height with Cutting Edge and Screen
6 ft
Maximum Depth of Cut
2 ft
Maximum Lift above Ground
4 ft
Capacity, Rated
16 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
29 ft

Semi U-Blade

Width – Moldboard Length
15 ft
Width - Over End Bits
15 ft
Height with Cutting Edge and Screen
7 ft
Maximum Depth of Cut
2 ft
Maximum Lift above Ground
4 ft
Capacity, Rated
21 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
30 ft

U-Blade

Width – Moldboard Length
14 ft
Width - Over End Bits
14 ft
Height with Cutting Edge and Screen
7 ft
Maximum Depth of Cut
2 mm
Maximum Lift above Ground
4 ft
Capacity, Rated
23 yd³
Overall Machine Length (includes rear radiator guard, measured to cutting edge)
31 ft

Sound Performance - Tier 4 Final / Stage V

Operator Sound Pressure Level (ISO 6396:2008)
73 dB(A)
Machine Sound Power Level (ISO 6395:2008)
113 dB(A)
Operator Sound Pressure Level (ISO 6396:2008)*
72 dB(A)
Machine Sound Power Level (ISO 6395:2008)*
110 dB(A)
Note (1)
* Sound suppression equipped
Note (2)
The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (3)
The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.
Note (4)
Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

OPERATOR COMFORT AND CONTROL

TOP-TIER SERVICE AND SUPPORT

EFFICIENCY AND PRODUCTIVITY

PRODUCTIVITY WITH TECHNOLOGY

LONG-TERM VALUE AND DURABILITY

WHEEL TIPS BUILT TO PERFORM

  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Powertrain
    • Single Clutch Speed Shifting (SCSS)
    • Electronic Clutch Pressure Control (ECPC)
    • Air-to-air aftercooler
    • Brakes, full hydraulic, enclosed, wet multiple disc service brakes
    • Cat Clean Emission Module (U.S. EPA Tier 4 Final/ EU Stage V only)
    • Muffler (under hood) (U.S. EPA Tier 3/EU Stage IIIA equivalent)
    • Electro-hydraulic parking brake
    • Engine, Cat C15 configured for two emissions options: Tier 4 Final/Stage V, or emitting equivalent to Tier 3/Stage IIIA
    • Fuel priming pump (electric)
    • Fuel-to-air cooler
    • Ground level engine shutdown
    • Heat shield, turbo and exhaust manifold
    • Hydraulically driven demand fan
    • Integrated braking system
    • Radiator, Aluminum Modular (AMR)
    • Separated cooling system
    • Starting aid (ether)
    • Throttle lock
    • Torque converter with Lock Up Clutch (LUC)
    • Eco Mode
    • Transmission, planetary, with 2F/2R speed range control
    • Under hood ventilation system
  • Electrical
    • Alarm, back-up
    • Alternator, 150 amp
    • Batteries, maintenance-free (4 - 1,000 CCA)
    • Electrical system, 24V
    • Light, warning unswitched (LED strobe)
    • Lighting system, halogen (front and rear)
    • Lighting, access stairway
    • Lighting, underhood
    • Starter, electric (heavy duty)
    • Ground level lockable master disconnect switch
    • Auxiliary jump start receptacle
  • Operator Environment
    • Camera, rear vision
    • Air conditioner with roof-mounted condenser
    • Cab, sound-suppressed pressurized
    • Internal four-post rollover protective structure (ROPS/FOPS)
    • Radio ready for entertainment: – Antenna – Speakers – Converter (12V, 10-15 amp)
    • 12V power port for mobile phone or laptop connection
    • Radio, CB ready
    • Coat and hard hat hooks
    • Fingertip shifting controls
    • Flip-up armrest
    • Heater and defroster
    • Implement hydraulic lockout
    • Glass (window) - rubber mounted glass
    • Light, (dome) cab
    • Lunch box and beverage holders
    • Instrumentation, gauges: – Diesel exhaust fluid (DEF) level (U.S. EPA Tier 4 Final/ EU Stage V) – Engine coolant temperature – Fuel level – Hydraulic oil temperature – Speedometer/tachometer – Torque converter temperature
    • Instrumentation, warning indicators: – Action alert system, three categories – Brake oil pressure – Electrical system, low voltage – Engine failure malfunction alert and action lamp – Parking brake status
    • Mirror, internal (panoramic)
    • Mirrors, heated, rearview (externally mounted)
    • Premium plus seat containing forced air heating and cooling, 2-way thigh adjustment, power lumbar and back bolster adjustment, ride stiffness adjustment, dynamic end dampening, and leather finish
    • Seat belt with minder, retractable, 76 mm (3 in) wide
    • Steering and Transmission Integrated Control (STIC™) system with lockout
    • Sun visor, front
    • Tinted glass
    • Transmission gear (indicator)
    • Vital Information Management System (VIMS™): – Graphical information display – External data port – Customizable operator profiles
    • Wet-arm wipers/washers (front and rear)
    • Intermittent wipers (front and rear)
    • Precleaner, cab powered
    • Horn group (trumpet)
  • Guards
    • Guards, axle (front and rear)
    • Guard, cab window
    • Guard, driveshaft
    • Guards, crankcase and powertrain, hydraulically powered
    • Guard, differential (front and rear)
  • Fluids
    • Antifreeze, premixed 50% concentration extended life (–34° C/–29° F)
  • Other Standard Equipment
    • Demand fan/swing out (hydraulic reversible)
    • Doors, service access (locking)
    • Ecology drains for engine, radiator, transmission, hydraulic tank
    • Emergency platform exit
    • Engine, crankcase, 500 hour interval with CJ-4 oil
    • Engine idle management features: – Auto idle kickdown – Delayed engine shutdown – Engine idle shutdown
    • Fire suppression ready
    • Fuel tank, 782 L (207 gal)
    • Hitch, drawbar with pin
    • Hoses, Cat XT™
    • Hydraulic, engine, and transmission oil coolers
    • Total hydraulic filtration system
    • Oil sampling valves
    • Oil change system, high speed
    • Steering, load sensing
    • Stairway, left and right rear access
    • Vandalism protection caplocks
    • Venturi stack
    • Fold-down exhaust stack for shipping
  • Technology Products
    • Product Link™ – Cellular, Satellite
  • Special Arrangements
    • Engine: – Sound suppression
    • Engine precleaners - single stage
  • Blades
    • Dozer arrangement (no blade)
  • Wheels And Cleaner Bars
    • Striker bars
    • Wheels and tips: wheel arrangements – 7" combination tips
  • Note
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • Operator Environment
    • Radio, AM/FM/Aux/USB/Bluetooth®
    • Cat Compact SBAS Mapping (available through SITECH only)
    • Cat Compact RTK Mapping (available through SITECH only)
  • Guards
    • Guard – rear fan and grill
  • Powertrain
    • Heater, engine coolant, 120V
    • Heater, engine coolant, 240V
  • Special Arrangements
    • Engine precleaners – dual stage
  • Miscellaneous
    • Plate – year of manufacture (Tier 3/Stage IIIA equivalent only)
  • Wheels And Cleaner Bars
    • Striker bars with cleaner fingers
  • Other Standard Equipment
    • Stairway, swingout (LH & RH)

Related Used Equipment


2019 Cat CP56B
Hours
3,661
Price
112,500
×