834 Wheel Dozer

Engine

Engine Model

Cat® C18 

Net Power - SAE J1349:2011

496 hp

Rated Speed

1,900 r/min

Peak Power Speed

1,500 r/min

Gross Power - SAE J1995:2014

562 hp

Bore

6 in

Stroke

7 in

Displacement

1,105 in³

Peak Torque - 1,300 rpm

2,092 lb/ft

Torque Rise

52 %

Note (1)

Net power advertised is the power available at the engine flywheel when the engine is equipped with a fan, air cleaner, clean emissions module and alternator.

Note (2)

The following engine configurations are available: – Meets U.S. EPA Tier 4 Final and EU Stage V emission standards. – Noncertified that emits equivalent to U.S. EPA Tier 3.

Operating Specifications

Operating Weight

105,271 lb

Blade Capacities

7.9 – 22.2 m3 (10.3 – 29.0 yd3)

Transmission

Transmission Type

Cat planetary power shift

Forward - 1

4 mile/h

Forward - 2

7 mile/h

Forward - 3

13 mile/h

Forward - 4

22 mile/h

Reverse - 1

4 mile/h

Reverse - 2

8 mile/h

Reverse - 3

13 mile/h

Direct Drive - Forward 1

Lock-up disabled

Direct Drive - Forward 2

8 mile/h

Direct Drive - Forward 3

14 mile/h

Direct Drive - Forward 4

24 mile/h

Direct Drive - Reverse 1

5 mile/h

Direct Drive - Reverse 2

8 mile/h

Direct Drive - Reverse 3

14 mile/h

Note

Travel speeds based on 35/65-R33 tire

Hydraulic System - Lift/Tilt

Lift/Tilt System - Circuit

Pilot operated LS valve with EH

Lift/Tilt System

Variable displacement piston

Maximum Flow at 1,900 rpm

153 gpm

Relief Valve Setting - Lift/Tilt

4,641 psi

Cylinders, Double Acting - Lift, Bore and Stroke

139.75 mm × 1021 mm (5.5 in × 40.2 in)

Cylinders, Double Acting - Left and Right Tilt, Bore and Stroke

140 mm × 230 mm (5.5 in × 9.1 in)

Pilot System

Variable displacement piston

Pilot Maximum Flow

14 gpm

Pilot Relief Valve Setting

580 psi

Hydraulic System - Steering

Steering System - Circuit

Pilot, load sensing

Steering System - Pump

Piston, variable displacement

Maximum Flow

66 gpm

Relief Valve Setting - Steering

3,495 psi

Total Steering Angle

86 °

Steering Cycle Times - High Idle

3 s

Steering Cycle Times - Low Idle

6 s

Service Refill Capacities

Fuel Tank

210 gal (US)

Cooling System

32 gal (US)

Crankcase

16 gal (US)

Diesel Exhaust Fluid Tank

9 gal (US)

Transmission

32 gal (US)

Hydraulic System Factory Fill

63 gal (US)

Differential - Final Drives - Front

49 gal (US)

Differential - Final Drives - Rear

49 gal (US)

Hydraulic System - Tank Only

37 gal (US)

Note (1)

All non-road Tier 4 Final/Stage V diesel engines are required to use: – ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: • 20% biodiesel FAME (fatty acid methyl este

Air Conditioning System

Air Conditioning

The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a or R1234yf. See the label or instruction manual for identification of the gas. - If equipped with R134a (Global Warming Potential = 1430), the system co

Axles

Front

Fixed

Rear

Trunnion

Oscillation Angle

±13°

Brakes

Brakes

ISO 3450: 2011

Sound Performance - Tier 4 Final / Stage V

Operator Sound Pressure Level (ISO 6396:2008)

72 dB(A)

Machine Sound Power Level (ISO 6395:2008)

113 dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*

72 dB(A)

Machine Sound Power Level (ISO 6395:2008)**

109 dB(A)

Note (1)

* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”

Note (2)

** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701

Note (3)

The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (4)

The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (5)

Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Sound Performance - Tier 3 / Stage IIIA

Operator Sound Pressure Level (ISO 6396:2008)

72 dB(A)

Machine Sound Power Level (ISO 6395:2008)

113 dB(A)

Operator Sound Pressure Level (ISO 6396:2008)*

72 dB(A)

Machine Sound Power Level (ISO 6395:2008)**

110 dB(A)

Note (1)

* For machines in European Union countries and in countries that adopt the “EU Directives” and “UK Directives”

Note (2)

** European Union Directive “2000/14/EC” as amended by “2005/88/EC” and UK Noise Regulation 2001 No. 1701

Note (3)

The machine sound power level was measured according to ISO 6395:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (4)

The operator sound pressure level was measured according to ISO 6396:2008. The measurement was conducted at 70 percent of the maximum engine cooling fan speed.

Note (5)

Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment.

Dimensions

Height - Top of Exhaust Stack

16 ft

Height - Top of Air Cleaner

13 ft

Height - Top of Hood

11 ft

Ground Clearance - Bumper

3 ft

Centerline of Rear Axle to Edge of Bumper

11 ft

Wheel Base

15 ft

Length - Front of Tire

28 ft

Length - Straight Blade on Ground

33 ft

Length - Universal Blade on Ground

34 ft

Centerline of Front Axle to Hitch

8 ft

Ground Clearance

2 ft

Height - Top of Cab

14 ft