D3 Track-Type Tractor

  • Exterior View
  • Interior View

Engine

Engine Model
Cat® C3.6
Power - Net
104 HP
Displacement
220 in³
Net Power - 2,200 rpm - SAE J1349
104 HP
Net Power - 2,200 rpm - ISO 9249/EEC 80/1269
104 HP
Note (1)
Net power is tested per ISO 9249:2007 and SAE J1349:2011 and as advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator.
Note (2)
All non-road U.S. EPA Tier 4 Final, EU Stage V, Japan 2014 (Tier 4 Final) and Korea Tier 4 Final diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur or less.

Engine 

Power Train 
Hydrostatic

Weights

Operating Weight
20,640 lb
Operating Weight - LGP
21,369 lb
Operating Weight - LGP, 762 mm/30 in
21,810 lb
Note (2)
For machine with ripper, add 554 kg (1,222 lb).
Note (1)
Specifications shown are for machine equipped with dozer blade, EROPS cab, back-up alarm, operator, coolant, lubricants and full fuel tank.

Weights 

Operating Weight
20,640 lb

Cab

ROPS
ISO 3471:2008
FOPS
ISO 3449:2005 Level II

Transmission

Drive Pumps
1
Maximum Travel Speed - Forward
6 mile/h
Maximum Travel Speed - Reverse
6 mile/h
Track Motors
2
Relief Valve Settings
7,033 psi

Undercarriage

Shoe Width - Standard
20 in
Ground Pressure - LGP
5 psi
Track Gauge - LGP
69 in
Length - Track on Ground - LGP
91 in
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage
40
Ground Pressure - LGP, 762 mm (30 in)
4 psi
Length - Track on Ground - LGP, 762 mm (30 in)
91 in
Shoe Width - LGP
26 in
Shoe Width - LGP, 762 mm (30 in)
30 in
Track Gauge
63 in
Number of Rollers - Each Side
7
Track Gauge - LGP, 762 mm (30 in)
73 in

Undercarriage 

Ground Pressure 
6 psi
Length of Track on Ground 
91 in
Number of Shoes - Each Side - Abrasion Undercarriage 
36

Service Refill Capacities

Cooling System
5 gal (US)
Final Drive - Each - LGP
3 gal (US)
Crankcase - With Filter
3 gal (US)
Diesel Exhaust Fluid (DEF) Tank
5 gal (US)
Transmission - Hydraulic Tank
24 gal (US)
Fuel Tank
52 gal (US)

Service Refill Capacities 

Final Drives - Each Side 
3 gal (US)

Hydraulic Controls

Pump Output
17 gal/min
Relief Valve Settings
2,988 psi

Ripper

Type
Parallelogram
Number of Shanks
3
Height
7 in
Weight
1,222 lb
Maximum Digging Depth
13 in
Maximum Reach - Ground Line
30 in
Overall Width
67 in
Maximum Ground Clearance Under Tip
18 in

Winch

Weight
1,345 lb
Winch Drive
Hydrostatic
Control
Hydraulic
Speed
Variable
Maximum Line Pull - Full Drum
25,000 lb
Throat Clearance
7 in
Rope Diameter - Recommended
1 in
Overall Width
29 in
Maximum Line Speed - Full Drum
207 ft/min
Rope Diameter - Optional
1 in
Maximum Line Pull - Bare Drum
40,000 lb
Drum Capacity - Optional Cable
256 ft
Winch Length
28 in
Drum Width
11 in
Maximum Line Speed - Bare Drum
131 ft/min
Drum Capacity - Recommended Cable
371 ft
Drum Diameter
10 in

Air Conditioning System

Air Conditioning
The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.8 kg of refrigerant which has a CO2 equivalent of 2.574 metric tonnes.

Dimensions

Width - Tractor - Standard Shoes - No Blade - LGP
93 in
BLADE: Blade Width - LGP
127 in
BLADE: Maximum Tilt - Intermediate
18 in
Track Gauge - LGP, 762 mm (30 in)
73 in
BLADE: Digging Depth - LGP
23 in
Track Gauge - LGP
68 in
BLADE: Blade Capacity (SAE) - LGP
3 yd³
BLADE: Blade Width - Intermediate
115 in
Width - Tractor - Standard Shoes - No Blade - LGP (762 mm/30 in)
104 in
BLADE: Blade Lift Height - Intermediate
30 in
Length - Basic Tractor - Without Blade - LGP
129 in
BLADE: Blade Width at Maximum Angle - LGP
116 in
Tractor Height - LGP
109 in
BLADE: Blade Cutting Edge Angle, Adjustable - LGP
52° to 58°
Ground Clearance - LGP, 762 mm (30 in)
13 in
BLADE: Digging Depth - Intermediate
23 in
BLADE: Blade Height - LGP
40 in
Length - Basic Tractor - Without Blade - LGP, 762 mm (30 in)
129 in
BLADE: Blade Lift Height - LGP
30 in
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate
52° to 58°
Ground Clearance - LGP
13 in
Overall Length - With Blade - LGP, 762 mm (30 in)
170 in
BLADE: Blade Height - Intermediate
40 in
BLADE: Blade Width at Maximum Angle - Intermediate
105 in
BLADE: Blade Capacity (SAE) - Intermediate
3 yd³
Overall Length - With Blade - LGP
170 in
BLADE: Maximum Angle (either side) - Intermediate
25°
BLADE: Maximum Tilt - LGP
18 in
Tractor Height - LGP, 762 mm (30 in)
109 in
BLADE: Maximum Angle (either side) - LGP
25°
Note
With Ripper Attachment (add to Length of Basic Dozer) - 1177 mm (46.3 in)
Length of Basic Dozer (without blade) - Standard
129 in
Dozer Height - Standard
109 in
Width of Dozer (standard shoes, no blade) - LGP
93 in
Width of Dozer (standard shoes, no blade) - LGP, 762 mm (30 in)
104 in
Length of Basic Dozer (without blade) - LGP
129 in
Dozer Height - LGP, 762 mm (30 in)
109 in
Width of Dozer (standard shoes, no blade) - Standard
83 in
Length of Basic Dozer (without blade) - LGP, 762 mm (30 in)
129 in
Dozer Height - LGP
109 in

Dimensions 

Length - Basic Tractor - Without Blade - Standard 
129 in
BLADE: Blade Capacity (SAE) - Standard 
3 yd³
Track Gauge - Standard 
63 in
Width - Tractor - Standard Shoes - No Blade - Standard 
83 in
BLADE: Digging Depth - Standard 
24 in
BLADE: Blade Lift Height - Standard 
30 in
Tractor Height - Standard 
109 in
Ground Clearance - Standard 
13 in
Overall Length - With Blade - Standard 
171 in
BLADE: Blade Cutting Edge Angle, Adjustable - Standard 
52° to 58°
BLADE: Blade Height - Standard 
42 in
BLADE: Maximum Tilt - Standard 
16 in
Note 
Abrasion Undercarriage
BLADE: Blade Width - Standard 
110 in
BLADE: Blade Width at Maximum Angle - Standard 
104 in
BLADE: Maximum Angle (either side) - Standard 
25°

Retrieval Winch

Maximum Line Pull - Bare Drum
32,150 lb
Control
Hydraulic
Rope Diameter - Optional
1 in
Drum Capacity - Optional Cable
195 ft
Maximum Line Speed - Full Drum
79 ft/min
Drum Capacity - Recommended Cable
277 ft
Winch Drive
Hydraulic
Weight
1,747 lb
Maximum Line Pull - Full Drum
20,350 lb
Rope Diameter - Recommended
1 in
Maximum Line Speed - Bare Drum
50 ft/min
Speed
Variable
Winch Length
36 in
Drum Diameter
8 in
Overall width
28 in
Drum Width
10 in
Throat Clearance
6 in

High Performance Winch

Winch length
28 in
Rope diameter – optional
1 in
Maximum line speed – bare drum
131 ft/min
Maximum line pull – bare drum
40,000 lb
Weight
1,345 lb
Drum capacity – optional
256 ft
Maximum line speed – full drum
207 ft/min
Rope diameter – recommended
1 in
Winch drive
Hydrostatic
Throat clearance
7 in
Drum diameter
10 in
Overall width
29 in
Drum width
11 in
Maximum line pull – full drum
25,000 lb
Speed
Variable
Drum capacity – recommended cable
371 ft
Control
Hydraulic

IMPROVED VISIBILITY

  • New sloped hood provides better visibility to the work in front of the blade as well as the overall job site. Better visibility can equal less operator fatigue and more confidence in your work.

GRADE TECHNOLOGY

  • Scalable 2D and 3D Cat Grade provide technologies like Slope Assist, Stable Blade, and Slope Indicate for easier and more efficient operation, as well as the flexibility to adapt different technology based on job site demands.
  • All Cat Grade systems are compatible with radios and base stations from Trimble, Topcon, and Leica.
  • Already invested in a grade infrastructure? You can install grade systems from Trimble, Topcon, and Leica onto the machine.

UP TO 10% IMPROVED FUEL ECONOMY

  • The D3 features the lowest fuel consumption in this size class with the same great performance you've come to expect. Up to 20% improvement and no performance sacrifice when ECO mode is active.

COMFORTABLE WORK SPACE

  • The spacious and comfortable cab features an optional heated and ventilated seat, along with heated joystick controls to make the operator comfortable no matter what the conditions are outside. The seat height and armrests can be easily adjusted to the operator’s preference.

BIGGER, BETTER DISPLAY WITH CAMERA

  • This new and improved optional 10 in (254 mm) touchscreen, color display is easy to use, with a great view of machine settings, rearview camera and Slope Indicate/Slope Assist screens. The large reversing camera gives the operator better visibility to the job site.

DURABLE UNDERCARRIAGE

  • The D3 is available with either a Sealed and Lubricated Track (SALT) or Abrasion undercarriage to best suit your application. The undercarriage has a longer life resulting in less down time. A one piece mainframe/track roller frame design and the large, double reduction planetary final drive allow the machine to push heavy loads.
  • Power Train
    • Air cleaner with precleaner, automatic dust ejection and underhood intake
    • Aluminum bar plate cooling system (radiator, power train)
    • Automatic traction control
    • Cat C3.6 diesel engine
    • Drive, auxiliary
    • Dual path, closed loop, hydrostatic transmission
    • Electric fuel pump
    • Fuel/water separator
    • Turbocharged aftercooled
  • Electrical
    • Alarm, backup
    • Alternator, 150 amp, heavy duty
    • Batteries, heavy duty, maintenance free, 1,000 CCA
    • Diagnostic connector
    • Four integrated front halogen lights, two rear halogen
    • Horn, electric
    • Starter, electric, 12 V, heavy duty
  • Undercarriage
    • SALT undercarriage (40 section)
    • Carrier rollers
    • Guards, front/rear guiding
    • Seven roller track frame
    • Track adjusters, hydraulic
    • Track rollers, lifetime lubricated
  • Hydraulic
    • Hydraulic pump and oil
    • Single lever, three function control
    • Three valve hydraulics
  • Cat Technology
    • Cat Product Link PLE643/PLE743 Cellular
    • Slope Indicate
    • Stable blade
    • Compatibility with radios and base stations from Trimble, Topcon, and Leica
    • Capability to install 3D grade systems from Trimble, Topcon, and Leica
  • Attachments
    • Rigid drawbar
    • Front pull device
  • Operator Environment
    • Armrests, adjustable
    • Coat hook
    • Controls, seat mounted, fore/aft adjustment
    • Cup holders
    • Eco mode
    • Electronic Monitoring system with gauge:
      – Chassis slope indication
      – Diesel exhaust fluid (DEF)
      – Engine coolant temperature
      – Fuel level
      – Hydraulic oil temperature
    • Electronic security system
    • Engine air cleaner service indicator
    • Engine RPM and gear display
    • Floor mat, rubber, heavy duty
    • Foot pads, dash
    • Hour meter, electronic
    • Independent forward/reverse speed settings
    • Mirror, rearview, inside
    • Power port, 12 volt
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, hi-vis retractable 76 mm (3")
    • Seatbelt buckling indicator/reminder
    • Single pedal combining decel and brake functions
    • Speed recall
    • Storage compartment
    • Throttle switch, rotary
    • Travel speed limiter, electronic
  • Power Train
    • Air cleaner with external precleaner
    • Installation, winch
  • Electrical
    • Four integrated front LED lights, two rear LED
  • Undercarriage
    • Abrasion undercarriage (36 section)
    • Track Pairs
      – Track, 510 mm (20 in)
      – Track, 660 mm (26 in)
      – Track, 762 mm (30 in)
  • Hydraulic
    • Four valve for use with ripper
    • Four valve for use with winch
  • Cat Technology
    • Cat GRADE with Slope Assist
    • Cat GRADE with 3D
    • Cat Product Link PLE683/PLE783 Cellular/Satellite
    • Full-color 10 in (254 mm) touchscreen grade display
    • Power Pitch
  • Attachments
    • Drawbar, towing
    • Machine security system
    • Mounting, winch
    • Ripper, parallelogram, includes three shanks and teeth
    • Winch, hydraulic, high performance
    • Winch, hydraulic, retrieval
  • Operator Environment
    • Cab, with air conditioning
    • Cab, polycarbonate windows and air conditioning
    • Radio, AM/FM Bluetooth®
    • Seat, air suspension, choice of:
      – Vinyl, heated seat with heated controls
      – Cloth, heated seat with heated controls
      – Cloth, heated and ventilated seat with heated controls
    • Sound suppression
  • Other
    • Heater, engine, coolant 120 V/240 V
    • Starting aid, ether
×